Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case PHANTEKS Case Club for lovers & owners
New Posts  All Forums:Forum Nav:

[Official] Case PHANTEKS Case Club for lovers & owners - Page 1431

post #14301 of 19129
Any builds with the mnpctech window replacement?
post #14302 of 19129
Quote:
Originally Posted by moda View Post

Question on the Evolv ATX, can you mount a 280mm rad in the front and still maintain the 3.5" bays in the bottom?

Wanting to fit a 360mm rad in the top (RX360 - 56mm thick), either 240mm rad (RX240 - 56mm thick) or 280mm rad (GTS280 - 54mm thick) in the front, plus 3x 3.5" hdds in the floor (2x in the bays and 1x next to it)) and 2x 2.5" ssds on the back.

Possible?

Annoyingly, no. It just interferes with the vertical bracket mount at the bottom front of the case. That being said, you can buy a 3.5 inch cage from phanteks and use the bottom mounting point. If you need two drives I suggest you get creative and break out the high strength Velcro and sound dampening foam.
    
CPUMotherboardGraphicsGraphics
Intel Core i7-4790K 4.0GHz Quad-Core Processor Asus MAXIMUS VII FORMULA ATX LGA1150 Motherboard  EVGA GeForce GTX 980 Ti 6GB Classified ACX 2.0+... EK-FC780 GTX Classy - Acetal+Nickel 
RAMHard DriveHard DriveHard Drive
Klevv Genuine 16GB (2 x 8GB) 240-Pin DDR3 SDRAM... Seagate Barracuda 3TB 3.5" 7200RPM Internal Har... Western Digital BLACK SERIES 3TB 3.5" 7200RPM I... Samsung 850 EVO 500GB 
Hard DriveCoolingCoolingCooling
Samsung 950 Pro Swiftech H240-X CPU Liquid Cooling Kit HardwareLabs Black Ice Nemesis GTS X-Flow 280mm Noctua NF-A14 industrialPPC-2000 PWM 107.4 CFM ... 
CoolingOSMonitorKeyboard
CooLaboratory Liquid Ultra Windows 10 Professional 64-bit Pioneer Kuro PDP-5020FD 50-Inch Class (49.85'' ... Logitech Illuminated Living-Room Keyboard K830 
PowerCaseMouseOther
EVGA 850W 80+ Gold Certified Fully-Modular ATX ... Phanteks Enthoo Evolv ATX Tempered Glass Editio... Logitech G400 Professional Gaming Mouse MX518 Fanatec ClubSport Wheel Base V2 US 
OtherOtherOtherOther
Fanatec ClubSport Steering Wheel BMW M3 GT2 US Fanatec ClubSport Steering Wheel Formula US Fanatec ClubSport Shifter SQ US Fanatec ClubSport Pedals V2 US 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
Intel Core i7-4790K 4.0GHz Quad-Core Processor Asus MAXIMUS VII FORMULA ATX LGA1150 Motherboard  EVGA GeForce GTX 980 Ti 6GB Classified ACX 2.0+... EK-FC780 GTX Classy - Acetal+Nickel 
RAMHard DriveHard DriveHard Drive
Klevv Genuine 16GB (2 x 8GB) 240-Pin DDR3 SDRAM... Seagate Barracuda 3TB 3.5" 7200RPM Internal Har... Western Digital BLACK SERIES 3TB 3.5" 7200RPM I... Samsung 850 EVO 500GB 
Hard DriveCoolingCoolingCooling
Samsung 950 Pro Swiftech H240-X CPU Liquid Cooling Kit HardwareLabs Black Ice Nemesis GTS X-Flow 280mm Noctua NF-A14 industrialPPC-2000 PWM 107.4 CFM ... 
CoolingOSMonitorKeyboard
CooLaboratory Liquid Ultra Windows 10 Professional 64-bit Pioneer Kuro PDP-5020FD 50-Inch Class (49.85'' ... Logitech Illuminated Living-Room Keyboard K830 
PowerCaseMouseOther
EVGA 850W 80+ Gold Certified Fully-Modular ATX ... Phanteks Enthoo Evolv ATX Tempered Glass Editio... Logitech G400 Professional Gaming Mouse MX518 Fanatec ClubSport Wheel Base V2 US 
OtherOtherOtherOther
Fanatec ClubSport Steering Wheel BMW M3 GT2 US Fanatec ClubSport Steering Wheel Formula US Fanatec ClubSport Shifter SQ US Fanatec ClubSport Pedals V2 US 
  hide details  
Reply
post #14303 of 19129
Quote:
Originally Posted by Chiobe View Post

Any builds with the mnpctech window replacement?

I have the MNPC TECH window on my case. As soon as the EK fan comes for the replacement to the loud bitphoenix I will post up some B roll pics on here using a friends high quality camera. For EK formus, here, and MNPC tech. The fit and finish of the MNPC tech window is flawless and VERY high quality. Weighs ALOT. LOVE it ABSOLUTELY recommend it. The only thing that bothers me about this build is why in the heck EK counter sinks the holes in the 360 PE radiator. Their plug or their 8mm extension is the only way to connect to the rad. Not even their own compression fitting will fit into the counter sink. Ughhh. But as soon as I get the EK fan from PPCs and get it mounted I will post up some high quality pics. One other thing, the 240 Hardware Labs radiator has to be the hardest radiator to get all the air out of I've ever seen. They must build in air pockets. At least 100ml of air come out of that rad after normal bleeding. Looking at cases again this morning. Really wanting to do a red, white, and blue pastel build using Monsoons res with the dividers. Thanks for the like. Here is a couple of cell phone pics with the MNPC tech glass side panel.





With ought the Bitphoenix fan this build is absolutely silent. Before I replaced the fan my wife asked me "recon how long the neighbor is going to weedeat, it's getting on my nerves" haha. Guys, I am truly sorry if my posts, responses are sometime a little incoherent. I have a very serious neurological/muscular disorder that is truly hell on me but I do my best, and also the "ee" key is sticking on this $100 keyboard. Please bear with me. Maybe this pic will help explain my situation.

IMG_0667_zpsc9doubzr.jpg

I'm bedridden alot of days, wheelchair 90 percent, so when I post something or build something you can believe I've done the best I can do and have given it my all. Thanks guys.
Edited by 19DELTASNAFU - 7/18/16 at 8:36am
post #14304 of 19129
Quote:
Originally Posted by 19DELTASNAFU View Post

I have the MNPC TECH window on my case. As soon as the EK fan comes for the replacement to the loud bitphoenix I will post up some B roll pics on here using a friends high quality camera. For EK formus, here, and MNPC tech. Thee fit and finish of the MNPC tech window is flawless and VERY high quality. Weighs ALOT. LOVE it ABSOLUTELY recommend it. The only thing that bothers me about this build is why in the heck EK counter sinks the holes in the 360 PE radiator. Their plug or their 8mm extension is the only way to connect to the rad. Not even their own compression fitting will fit into the counter sink. Ughhh. But as soon as I get the EK fan from PPCs and get it mounted I will post up some high quality pics. One other thing, the 240 Hardware Labs radiator has to be the hardest radiator to get all the air out of I've ever seen. They must build in air pockets. At least 10ml of air come out of that rad after normal bleeding. Looking at cases again this morning. Really wanting to do a red, white, and blue pastel build using Monsoons res with the dividers. Thanks for the like. Here is a couple of cell phone pics with the MNPC tech glass side panel.

With ought the Bitphoenix fan this build is absolutely silent. Before I replaced the fan my wife asked me "recon how long the neighbor is going to weedeat, it's getting on my nerves" haha.
Wrong case, but still useful info. Is it scratch resistance or does it get marks easy? Same for fingerprints I guess.

As for bleeding, that seems to depend on how easy the air can move out of the place its in. Adding a T somewhere in the top of the loop, so you can bleed or add air pressure, might be useful in complex builds.


Phanteks Enthoo Primo SE, how big of a reservoir can I add on the reservoir mount besides the motherboard?
I will be using Hardware Labs Black Ice SR2 in top and bottom, with a single set of fans (dont think its enough room for push-pull), if that matters to the reservoir length.
Also, the pump spot besides the PSU, can it still be used with a 200mm long PSU?
post #14305 of 19129
Quote:
Originally Posted by 19DELTASNAFU View Post

I'm bedridden alot of days, wheelchair 90 percent, so when I post something or build something you can believe I've done the best I can do and have given it my all.
You have done a great job on that build and are truly a remarkable person.
I wish you all the best!
Quote:
Originally Posted by 19DELTASNAFU View Post

Thanks guys.
No sir, thank you!
post #14306 of 19129
Man i really want the enthoo pro but they messed up seriously on the intake:

1. Lots of dust is gonna get in there if you dont tape those side intakes off, and who wants to put tape on a new PC.
2. I heard from so many sites/reviews that the 200mm fan is loud. Im sure someone will come in here and say it isnt tho lol. Why didnt they just put dual 140's in front without massacring the case to fit the 200mm in there.
Steve
(9 items)
 
HTPC
(9 items)
 
 
CPUMotherboardGraphicsRAM
AMD Ryzen 7 1700 3.9@1.376v Asrock Killer x370 SLI/AC EVGA GTX 1060 SSC 6gb Gskill ripjaws 3200/2933 14-16-16-36 
Hard DriveCoolingMonitorPower
Seagate firecuda 1tb Be Quiet! Dark Rock Pro 3 Dell S2417DG EVGA 650 GQ 
Case
NZXT H440 Matte Black 
CPUMotherboardGraphicsRAM
Intel Pentium G4560 Asrock H110M-ITX PNY GT 1030 4GB Team Dark 2400  
Hard DriveMonitorKeyboardCase
PNY CS900 240gb SSD Vizio Smartcast E55 Logitech K400 Inwin BP655.300 
Audio
Vizio 3.1 Soundbar 
  hide details  
Reply
Steve
(9 items)
 
HTPC
(9 items)
 
 
CPUMotherboardGraphicsRAM
AMD Ryzen 7 1700 3.9@1.376v Asrock Killer x370 SLI/AC EVGA GTX 1060 SSC 6gb Gskill ripjaws 3200/2933 14-16-16-36 
Hard DriveCoolingMonitorPower
Seagate firecuda 1tb Be Quiet! Dark Rock Pro 3 Dell S2417DG EVGA 650 GQ 
Case
NZXT H440 Matte Black 
CPUMotherboardGraphicsRAM
Intel Pentium G4560 Asrock H110M-ITX PNY GT 1030 4GB Team Dark 2400  
Hard DriveMonitorKeyboardCase
PNY CS900 240gb SSD Vizio Smartcast E55 Logitech K400 Inwin BP655.300 
Audio
Vizio 3.1 Soundbar 
  hide details  
Reply
post #14307 of 19129
Quote:
Originally Posted by Scotty99 View Post

Man i really want the enthoo pro but they messed up seriously on the intake:

1. Lots of dust is gonna get in there if you dont tape those side intakes off, and who wants to put tape on a new PC.
2. I heard from so many sites/reviews that the 200mm fan is loud. Im sure someone will come in here and say it isnt tho lol. Why didnt they just put dual 140's in front without massacring the case to fit the 200mm in there.
Just buy some filters and mount them over the side intake: https://www.amazon.com/Computer-Air-Filter-Polyurethane-Protects/dp/B000FJU8BC
post #14308 of 19129
Quote:
Originally Posted by Scotty99 View Post

Man i really want the enthoo pro but they messed up seriously on the intake:

1. Lots of dust is gonna get in there if you dont tape those side intakes off, and who wants to put tape on a new PC.
2. I heard from so many sites/reviews that the 200mm fan is loud. Im sure someone will come in here and say it isnt tho lol. Why didnt they just put dual 140's in front without massacring the case to fit the 200mm in there.

1. I haven't seen many dust complaints, even from people who don't block the side intakes.
2. Not sure you will find many here with anything good to say about the 200mm fan.....excepting that it is easy to remove.
post #14309 of 19129
Its just that even if i stuffed some filter material in there it would be a pain to clean that. They got so much of the case right just to mess up on small stuff lol. Also, when removing the 200mm fan that reduces the value the case offers because you would need to buy two new fans...sigh. Is it possible to turn down the 200mm to a point of being inaudible and still blow enough air?
Steve
(9 items)
 
HTPC
(9 items)
 
 
CPUMotherboardGraphicsRAM
AMD Ryzen 7 1700 3.9@1.376v Asrock Killer x370 SLI/AC EVGA GTX 1060 SSC 6gb Gskill ripjaws 3200/2933 14-16-16-36 
Hard DriveCoolingMonitorPower
Seagate firecuda 1tb Be Quiet! Dark Rock Pro 3 Dell S2417DG EVGA 650 GQ 
Case
NZXT H440 Matte Black 
CPUMotherboardGraphicsRAM
Intel Pentium G4560 Asrock H110M-ITX PNY GT 1030 4GB Team Dark 2400  
Hard DriveMonitorKeyboardCase
PNY CS900 240gb SSD Vizio Smartcast E55 Logitech K400 Inwin BP655.300 
Audio
Vizio 3.1 Soundbar 
  hide details  
Reply
Steve
(9 items)
 
HTPC
(9 items)
 
 
CPUMotherboardGraphicsRAM
AMD Ryzen 7 1700 3.9@1.376v Asrock Killer x370 SLI/AC EVGA GTX 1060 SSC 6gb Gskill ripjaws 3200/2933 14-16-16-36 
Hard DriveCoolingMonitorPower
Seagate firecuda 1tb Be Quiet! Dark Rock Pro 3 Dell S2417DG EVGA 650 GQ 
Case
NZXT H440 Matte Black 
CPUMotherboardGraphicsRAM
Intel Pentium G4560 Asrock H110M-ITX PNY GT 1030 4GB Team Dark 2400  
Hard DriveMonitorKeyboardCase
PNY CS900 240gb SSD Vizio Smartcast E55 Logitech K400 Inwin BP655.300 
Audio
Vizio 3.1 Soundbar 
  hide details  
Reply
post #14310 of 19129
Thread Starter 
Quote:
Originally Posted by Scotty99 View Post

Its just that even if i stuffed some filter material in there it would be a pain to clean that. They got so much of the case right just to mess up on small stuff lol. Also, when removing the 200mm fan that reduces the value the case offers because you would need to buy two new fans...sigh. Is it possible to turn down the 200mm to a point of being inaudible and still blow enough air?
Replace the PH-F200SP with 2x PH-F140SP. That what should have been installed to start with.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case PHANTEKS Case Club for lovers & owners