Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case PHANTEKS Case Club for lovers & owners
New Posts  All Forums:Forum Nav:

[Official] Case PHANTEKS Case Club for lovers & owners - Page 153

post #1521 of 18850
Quote:
Originally Posted by JackNaylorPE View Post

These seemed to have gotten lost in the original loooong post ..... so

Questions:

1. Anyone know the watt rating of a molex cable to PSU ? Wanted to combine the two power leads (18 watts each = 36 total) from the 35x2 onto a single cable.

2. Anyone have any idea if the 35x2 can safely run with just one pump plugged in ? It is touted as redundant if one pump fails but it seems like a good way to fill a loop since I won't be able to get in and adjust fan profile in BIOS till after it's running

3. Suggested location in Ehthoo for spare Bitspower temp sensor .... wanna use for inside case temperature measurement.

4. Anyone know of an ambient air temperature sensor that, ideally, could be mounted in room and wirelessly send a signal to the Raven Six Eyes inside the box ? original idea was to mount another Bitspower sensor thru a hole in the case grille but with 10 fans blowing in, I cab't imagine ahole anywhere that isn't blastic hot air out.

1. No idea

2. You should be fine, no issues there.

3. Does not matter where you put it, since you have almost everything under water. If you really wanted to, I would put something around the south bridge.

4. I have a wall clock that displays the ambient temp lol.




______________________________________


I will just leave this here, and walk away.


Edited by jassilamba - 11/23/13 at 11:06am
post #1522 of 18850
Thread Starter 
Quote:
Originally Posted by JackNaylorPE View Post

These seemed to have gotten lost in the original loooong post ..... so

Questions:

1. Anyone know the watt rating of a molex cable to PSU ? Wanted to combine the two power leads (18 watts each = 36 total) from the 35x2 onto a single cable.

2. Anyone have any idea if the 35x2 can safely run with just one pump plugged in ? It is touted as redundant if one pump fails but it seems like a good way to fill a loop since I won't be able to get in and adjust fan profile in BIOS till after it's running

3. Suggested location in Ehthoo for spare Bitspower temp sensor .... wanna use for inside case temperature measurement.

4. Anyone know of an ambient air temperature sensor that, ideally, could be mounted in room and wirelessly send a signal to the Raven Six Eyes inside the box ? original idea was to mount another Bitspower sensor thru a hole in the case grille but with 10 fans blowing in, I cab't imagine ahole anywhere that isn't blastic hot air out.
*1. 4 pin molex 8981 are rated 12 volt 11 amp. 30c temp. rise.
But I would limit it to 5 amp. I don't like the idea of 50c connections in a 20c room wink.gif

*2. No idea.

*3. Somewhere near hot chips on motherboard.

*4. No idea.
post #1523 of 18850
Quote:
Originally Posted by jassilamba View Post

1. No idea

2. You should be fine, no issues there.

3. Does not matter where you put it, since you have almost everything under water. If you really wanted to, I would put something around the south bridge.

4. I have a wall clock that displays the ambient temp lol.

3. That's what i was thinking .... I mean about the not mattering part. ....south bridge ? .... ya mean the one in Joisey ? smile.gif

4. I have a weather station but ya know hat that empty 6th channel does to use engineer types ...... now that we have a solution we have to obsess about finding a problem for it to solve !


Quote:
Originally Posted by doyll View Post

*1. 4 pin molex 8981 are rated 12 volt 11 amp. 30c temp. rise.
But I would limit it to 5 amp. I don't like the idea of 50c connections in a 20c room wink.gif

*2. No idea.

*3. Somewhere near hot chips on motherboard.

*4. No idea.

Well lets see....

1. I know I read somewhere that it was 18 x 2 .... but here:

http://martinsliquidlab.org/2012/01/29/swiftech-mcp35x2-pump/6/

says power peaked at 51.52 watts and 4.29 amps..... so even though I'll never see it, combining the two into one molex connector should not be an issue.

2. Jesse got that one.

3. The big stuff is WC'd..... the rest I have 3 temp sensors going to the MoBo that I can place somewhere (haven't thot where yet). Function is to display case air temp so i can compare ambient, case interior and water temps and monitor what effect any chnages have on either .... strictly for educational purposes (aka schlitz and giggles)

4. Figured 4 wud be the tough one smile.gif
Edited by JackNaylorPE - 11/23/13 at 2:28pm
911 Carrera
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel w/ EK Supremacy Cooling Block - Clean P... Asus Maximus VI Formula 2 x Asus GTX 780 DCII w/ EK Full Cover Blocks a... Mushkin Red Line Ridgeback 2 x 8GB DDR302400 10... 
Hard DriveHard DriveOptical DriveCooling
2 x SAMSUNG 840 Pro Series MZ-7PD256BW 2.5" 256GB (2 x Seagate ST2000DX001 2TB 7200 RPM 64MB Cach... Asus BW-12B1ST/BLK/G/AS Blue Ray Writer 1 x Alphacool NexXxoS XT45-420 + 1 x Alphacool ... 
CoolingCoolingCoolingCooling
1 x Swiftech 35x2 w/ Heatsink and NB Fan EK -MultiOption RES X3 250 White Acetal Reservoir 5 x PH-F140SP_BK_BLED + 5 x PH-F140SP_BK E22 Rigid 10/12 Acrylic Tubing and Bitspower Ma... 
CoolingOSMonitorKeyboard
2 x Reeven Six Eyes Fan Controller Windows 7 64 Bit Professional OEM ASUS VG248QE Black 23" 144 Hz Monitor Logitech G19s 920-004985 
PowerCaseMouseAudio
Seasonic X-1250 Phanteks Enthoo Primo Ultimate Chassis Asus RoG GX950 Laser Mouse  Logitech Z5500 
  hide details  
Reply
911 Carrera
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel w/ EK Supremacy Cooling Block - Clean P... Asus Maximus VI Formula 2 x Asus GTX 780 DCII w/ EK Full Cover Blocks a... Mushkin Red Line Ridgeback 2 x 8GB DDR302400 10... 
Hard DriveHard DriveOptical DriveCooling
2 x SAMSUNG 840 Pro Series MZ-7PD256BW 2.5" 256GB (2 x Seagate ST2000DX001 2TB 7200 RPM 64MB Cach... Asus BW-12B1ST/BLK/G/AS Blue Ray Writer 1 x Alphacool NexXxoS XT45-420 + 1 x Alphacool ... 
CoolingCoolingCoolingCooling
1 x Swiftech 35x2 w/ Heatsink and NB Fan EK -MultiOption RES X3 250 White Acetal Reservoir 5 x PH-F140SP_BK_BLED + 5 x PH-F140SP_BK E22 Rigid 10/12 Acrylic Tubing and Bitspower Ma... 
CoolingOSMonitorKeyboard
2 x Reeven Six Eyes Fan Controller Windows 7 64 Bit Professional OEM ASUS VG248QE Black 23" 144 Hz Monitor Logitech G19s 920-004985 
PowerCaseMouseAudio
Seasonic X-1250 Phanteks Enthoo Primo Ultimate Chassis Asus RoG GX950 Laser Mouse  Logitech Z5500 
  hide details  
Reply
post #1524 of 18850
So guys. Your all watercooling experts in my opinion.
From which point is it worth to have 2 pumps?
Im ordering a enthoo in the beginning of next month.
Gonna have a 280 Monsta, a 360 60mm and maybe another 240. Full motherboard cooling (2 mosfets and one big block) cpu and graphics.

i have a alphacool vpp655 and thinking about buying another one and fit in bitspowers dual block. is it worth?
post #1525 of 18850
Thread Starter 
Quote:
Originally Posted by jassilamba View Post


I will just leave this here, and walk away.


It's naked! eek.gif

Looks much better covered up. biggrin.gif
post #1526 of 18850
Thread Starter 
Quote:
Originally Posted by JackNaylorPE

4. Anyone know of an ambient air temperature sensor that, ideally, could be mounted in room and wirelessly send a signal to the Raven Six Eyes inside the box ? original idea was to mount another Bitspower sensor thru a hole in the case grille but with 10 fans blowing in, I cab't imagine ahole anywhere that isn't blastic hot air out.
Mount sensor in front of a front intake fan. Room temp air from room will be flowing over it into case.
post #1527 of 18850
Quote:
Originally Posted by Gunilla95 View Post

So guys. Your all watercooling experts in my opinion.
From which point is it worth to have 2 pumps?
Im ordering a enthoo in the beginning of next month.
Gonna have a 280 Monsta, a 360 60mm and maybe another 240. Full motherboard cooling (2 mosfets and one big block) cpu and graphics.

i have a alphacool vpp655 and thinking about buying another one and fit in bitspowers dual block. is it worth?

http://www.overclock.net/t/1445280/tubing-sizes-and-efficiencies/10#post_21252265

Flex tube or acrylic ? ... low restriction blocks or high ?

http://www.overclock.net/t/1445280/tubing-sizes-and-efficiencies/10#post_21252265

Three reasons I went with 2 (Swiftech 35x2)

1. See post # 18 .... 7 psi

2. Redundancy if one fails

3. Quiet things down ... at 1.5 gpm and 7 psi, it's at 50% PWM

I have a 4th now..... mounted on its heat sink it looks frakin cool smile.gif

911 Carrera
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel w/ EK Supremacy Cooling Block - Clean P... Asus Maximus VI Formula 2 x Asus GTX 780 DCII w/ EK Full Cover Blocks a... Mushkin Red Line Ridgeback 2 x 8GB DDR302400 10... 
Hard DriveHard DriveOptical DriveCooling
2 x SAMSUNG 840 Pro Series MZ-7PD256BW 2.5" 256GB (2 x Seagate ST2000DX001 2TB 7200 RPM 64MB Cach... Asus BW-12B1ST/BLK/G/AS Blue Ray Writer 1 x Alphacool NexXxoS XT45-420 + 1 x Alphacool ... 
CoolingCoolingCoolingCooling
1 x Swiftech 35x2 w/ Heatsink and NB Fan EK -MultiOption RES X3 250 White Acetal Reservoir 5 x PH-F140SP_BK_BLED + 5 x PH-F140SP_BK E22 Rigid 10/12 Acrylic Tubing and Bitspower Ma... 
CoolingOSMonitorKeyboard
2 x Reeven Six Eyes Fan Controller Windows 7 64 Bit Professional OEM ASUS VG248QE Black 23" 144 Hz Monitor Logitech G19s 920-004985 
PowerCaseMouseAudio
Seasonic X-1250 Phanteks Enthoo Primo Ultimate Chassis Asus RoG GX950 Laser Mouse  Logitech Z5500 
  hide details  
Reply
911 Carrera
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel w/ EK Supremacy Cooling Block - Clean P... Asus Maximus VI Formula 2 x Asus GTX 780 DCII w/ EK Full Cover Blocks a... Mushkin Red Line Ridgeback 2 x 8GB DDR302400 10... 
Hard DriveHard DriveOptical DriveCooling
2 x SAMSUNG 840 Pro Series MZ-7PD256BW 2.5" 256GB (2 x Seagate ST2000DX001 2TB 7200 RPM 64MB Cach... Asus BW-12B1ST/BLK/G/AS Blue Ray Writer 1 x Alphacool NexXxoS XT45-420 + 1 x Alphacool ... 
CoolingCoolingCoolingCooling
1 x Swiftech 35x2 w/ Heatsink and NB Fan EK -MultiOption RES X3 250 White Acetal Reservoir 5 x PH-F140SP_BK_BLED + 5 x PH-F140SP_BK E22 Rigid 10/12 Acrylic Tubing and Bitspower Ma... 
CoolingOSMonitorKeyboard
2 x Reeven Six Eyes Fan Controller Windows 7 64 Bit Professional OEM ASUS VG248QE Black 23" 144 Hz Monitor Logitech G19s 920-004985 
PowerCaseMouseAudio
Seasonic X-1250 Phanteks Enthoo Primo Ultimate Chassis Asus RoG GX950 Laser Mouse  Logitech Z5500 
  hide details  
Reply
post #1528 of 18850
Hi everyone smile.gif I received my Enthoo Primo. Can I get into the club?

I am very happy. This box is huge and really spacious. Fun for mounting and cable management. Soon I will spend all my configuration watercooling!

For cons, I have some question:

I can plug a molex plug on the fan controller? There is a sticker that says do not connect anything above?

Where to plug the cable led strip? And 12v?

Thank you for your answers. Photos will arrive soon!
post #1529 of 18850
Quote:
Originally Posted by JackNaylorPE View Post

http://www.overclock.net/t/1445280/tubing-sizes-and-efficiencies/10#post_21252265

Flex tube or acrylic ? ... low restriction blocks or high ?

http://www.overclock.net/t/1445280/tubing-sizes-and-efficiencies/10#post_21252265

Three reasons I went with 2 (Swiftech 35x2)

1. See post # 18 .... 7 psi

2. Redundancy if one fails

3. Quiet things down ... at 1.5 gpm and 7 psi, it's at 50% PWM

I have a 4th now..... mounted on its heat sink it looks frakin cool smile.gif


Looks nice mate!
Okey gonna be honest, didn't understand half of all that you where writing in the other thread.
well i got flex tubing. 10/13 mm.
i know that the motherboard blocks are high flow couse i bought them 3 days ago.
but not shure about my graphic card (http://www.ekwb.com/shop/ek-fc-titan-se.html) nor my Cpu block (http://www.ekwb.com/shop/blocks/cpu-blocks/supreme-ltx/ek-supreme-ltx-csq.html)

so.. thanks for you reply anyway biggrin.gif
post #1530 of 18850
Thread Starter 
Quote:
Originally Posted by Darshan View Post

Hi everyone smile.gif I received my Enthoo Primo. Can I get into the club?

I am very happy. This box is huge and really spacious. Fun for mounting and cable management. Soon I will spend all my configuration watercooling!

For cons, I have some question:

I can plug a molex plug on the fan controller? There is a sticker that says do not connect anything above?

Where to plug the cable led strip? And 12v?

Thank you for your answers. Photos will arrive soon!
Welcome aboard. thumb.gif
Anybody who wants to be here is a member.
We're that easy.biggrin.gif

Yes, you can plug the molex to PSU and 4pin PWM to motherboard and controller. That's how it works.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case PHANTEKS Case Club for lovers & owners