Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case PHANTEKS Case Club for lovers & owners
New Posts  All Forums:Forum Nav:

[Official] Case PHANTEKS Case Club for lovers & owners - Page 1537

post #15361 of 19369
Thread Starter 
Quote:
Originally Posted by Valgaur View Post

Seeing as we are on the topic of fans. I'm going to run a cryorig r1 ultimate on a 4770k for a while. But with what 780tishe in the case I'm wondering what fans would help move the heat out of the case. Thoughts and recommendations for front and top of the TG edition? Thanks!

I should mention I'm looking to make my purchase of the case tonight if possible. Finally, a new case!
What @pez said thumb.gif

Use motherboard fan controls (CPU PWM signal to Phanteks PWM controlled fan hub) to control case fans so they cycle with components and supply the airflow components need at both idle and full load.
Quote:
Originally Posted by Koeni View Post

Is it possible to get decent temps with a FX-9590 (don't ask me why) with CF RX 480 (Asus Strix) and EK Predator 360 top mounted inside the Evolv ATX Glass?

Or would the Primo have better temps?
Evolv ATX with EK Predator 360

https://www.reddit.com/r/watercooling/comments/3puc4g/ek_predator_360_with_phanteks_evolv_atx/

Going from Evolv ATX to Primo is like going from a Smart Car to a stretched Bentley.
Entho.o Primo is 250 mm x 650 mm x 600 mm (WxHxD)
Evolv ATX TG is 235 mm x 495 mm x 510 mm (W x H x D)

Huge difference; 15 mm x 155 mm x 90 mm

If you want a little bigger case I would suggest something like Luxe , Pro or Pro M
Luxe. 235 mm x 560 mm x 550 mm (W x H x D)
Pro is 235 mm x 535 mm x 550 mm (W x H x D)
Pro M 235 mm x 480 mm x 500 mm (W x H x D)
Edited by doyll - 10/4/16 at 2:25am
post #15362 of 19369
Quote:
Originally Posted by Koeni View Post

Is it possible to get decent temps with a FX-9590 (don't ask me why) with CF RX 480 (Asus Strix) and EK Predator 360 top mounted inside the Evolv ATX Glass?

Or would the Primo have better temps?

The Swiftech H320-X2 would have better temps, less noise, a better pump, ne easier to fill and bleed and look a lot better in the Evolv (or any other case, for that matter).

That kind of setup in a Primo looks like you are waiting for the rest of your rig to come.

A Luxe would have better temps than the Evolv by a little, and would look a lot more in tune with that type of system than a Primo.
post #15363 of 19369
Thread Starter 
Quote:
Originally Posted by ciarlatano View Post

Quote:
Originally Posted by Koeni View Post

Is it possible to get decent temps with a FX-9590 (don't ask me why) with CF RX 480 (Asus Strix) and EK Predator 360 top mounted inside the Evolv ATX Glass?

Or would the Primo have better temps?
The Swiftech H320-X2 would have better temps, less noise, a better pump, ne easier to fill and bleed and look a lot better in the Evolv (or any other case, for that matter).

That kind of setup in a Primo looks like you are waiting for the rest of your rig to come.

A Luxe would have better temps than the Evolv by a little, and would look a lot more in tune with that type of system than a Primo.


http://www.overclock.net/t/1598395/swiftech-h320-x2-prestige-blue-dye-supposed-to-look-so-pale-light/0_20
post #15364 of 19369
Guys can anyone confirm if the EK-XLC PREDATOR 360 will fit at the top of the Enthoo pro ?

If you can post some images will be great too.

Thanks in advance. thumb.gif
post #15365 of 19369

It still amazes me that people don't cut their tubes to fit when they open the loop to add dye......
post #15366 of 19369
Quote:
Originally Posted by pez View Post

Surprised that no one responded sooner. I had amazing results running 2x140 in front and one 140 in the rear. All of them were the F140SP from Phanteks. I believe the TG comes with two of these already.

Quote:
Originally Posted by doyll View Post

What @pez said thumb.gif

Use motherboard fan controls (CPU PWM signal to Phanteks PWM controlled fan hub) to control case fans so they cycle with components and supply the airflow components need at both idle and full load.
Evolv ATX with EK Predator 360

https://www.reddit.com/r/watercooling/comments/3puc4g/ek_predator_360_with_phanteks_evolv_atx/

Going from Evolv ATX to Primo is like going from a Smart Car to a stretched Bentley.
Entho.o Primo is 250 mm x 650 mm x 600 mm (WxHxD)
Evolv ATX TG is 235 mm x 495 mm x 510 mm (W x H x D)

Huge difference; 15 mm x 155 mm x 90 mm

If you want a little bigger case I would suggest something like Luxe , Pro or Pro M
Luxe. 235 mm x 560 mm x 550 mm (W x H x D)
Pro is 235 mm x 535 mm x 550 mm (W x H x D)
Pro M 235 mm x 480 mm x 500 mm (W x H x D)

Thanks guys!
post #15367 of 19369
Thread Starter 
Was just talking to Bill at MNPCtech.
This is 1st prototype for replacement front bezel for the Phanteks EVOLV ATX case by Mnpctech. It's not pretty, cause it's a prototype. Final version will have shorter vents and available in opaque solid colors, Black, White or Grey. Colors will not be exact color match to factory paint. Pricing isn't finalized.




We will need to swap your EVOLV ATX factory mounting hardware and 3.5" bay cover to this custom replacement panel.

Production will be limited to small quantities, as demand is very small.

He is thinking to do ITX version if there is interest.

No custom one-off design orders will be accepted, they just don't have the time sorry.

Im, really liking it!

What do you think?
post #15368 of 19369
Quote:
Originally Posted by doyll View Post

Was just talking to Bill at MNPCtech.
This is 1st prototype for replacement front bezel for the Phanteks EVOLV ATX case by Mnpctech. It's not pretty, cause it's a prototype. Final version will have shorter vents and available in opaque solid colors, Black, White or Grey. Colors will not be exact color match to factory paint. Pricing isn't finalized.
Warning: Spoiler! (Click to show)



We will need to swap your EVOLV ATX factory mounting hardware and 3.5" bay cover to this custom replacement panel.

Production will be limited to small quantities, as demand is very small.

He is thinking to do ITX version if there is interest.

No custom one-off design orders will be accepted, they just don't have the time sorry.

Im, really liking it!

What do you think?

Bill mentioned working on those, but I was hoping he would mill the actual factory panel and not have a replacement acrylic panel.
post #15369 of 19369
Thread Starter 
Quote:
Originally Posted by jassilamba View Post

Bill mentioned working on those, but I was hoping he would mill the actual factory panel and not have a replacement acrylic panel.
That was what I was originally thinking too, but this does look nice. Would be nice if Phanteks would send him 10x each of Evolv ATX and ITX front and top panels for him to machine venting into. If the paint didn't chip while machining a Sharpie would color the edges. Maybe even get Phanteks to sell them on their site. But that wouldn't help European customers. frown.gif
post #15370 of 19369
Man I would love to have a vented front panel on my ITX.

I've been thinking about just having at it with a drill/saw/dremel, but I'm not quite sure on how I would do it, holes, slots, or just cut a chunk out and fill it with mesh or a grill.
The Donbot
(12 items)
 
Crushinator
(10 items)
 
Lenovo T450S
(6 items)
 
CPUMotherboardGraphicsRAM
i5 2320 Asrock H61M-VG4 EVGA GTX 970 8gig Samsung LowPro 
Hard DriveMonitorKeyboardPower
Samsung 840 Evo 250gb/WD Black 640gb Asus 24 inch (1080p) Sades Mechanical w/blues Rosewill Hive 550 
CaseMouse
Apevia X-ENERQ Pink Logitec G100s 
CPUMotherboardGraphicsRAM
i5 5300u @ 2.90 Lenovo HD Graphics 5500 12 gigs 
Hard DriveOS
Samsung 250g SSD Windows 10 
  hide details  
Reply
The Donbot
(12 items)
 
Crushinator
(10 items)
 
Lenovo T450S
(6 items)
 
CPUMotherboardGraphicsRAM
i5 2320 Asrock H61M-VG4 EVGA GTX 970 8gig Samsung LowPro 
Hard DriveMonitorKeyboardPower
Samsung 840 Evo 250gb/WD Black 640gb Asus 24 inch (1080p) Sades Mechanical w/blues Rosewill Hive 550 
CaseMouse
Apevia X-ENERQ Pink Logitec G100s 
CPUMotherboardGraphicsRAM
i5 5300u @ 2.90 Lenovo HD Graphics 5500 12 gigs 
Hard DriveOS
Samsung 250g SSD Windows 10 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case PHANTEKS Case Club for lovers & owners