Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case PHANTEKS Case Club for lovers & owners
New Posts  All Forums:Forum Nav:

[Official] Case PHANTEKS Case Club for lovers & owners - Page 159

post #1581 of 18662
Quote:
Originally Posted by Unicr0nhunter View Post

Unless your card(s) is/are too long for it a Photon fits just fine in the Enthoo Primo....

Unfortunately right now that includes the top three cards in each manufacturer's line at least if using multiple cards..... "Res Bracket II" will adress that problem for some of them. Hopefully Enthoo II will get the rest.


Quote:
Originally Posted by Hereisphilly View Post

Are you running an overclock and delidded? If so that's awesome temps!

No.... haven't had the time yet .... and wanna clean block before I get temps too high. I wnated to get a benchmark and see how far I could go lidded before doing the delid thing.
Quote:
Now topping out at 35 C on GFX cards under Furmark (32% OC on clock / 25% on memory)
CPU at 44-46C (still stock = 3.9 Ghz)


Quote:
Originally Posted by Unicr0nhunter View Post

Weird, was just reading in the RIVBE owners club thread that speedfan picks up and allows custom control over every fan header on the RIVBE and RIVE boards, not just the CPU ones, and lets you set the PWM to lower duty cycle settings than the ASUS suite allows.

AIDA sees em..... OCCT sees em..... dunno what's up with SpeedFan
Edited by JackNaylorPE - 11/26/13 at 10:43am
911 Carrera
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel w/ EK Supremacy Cooling Block - Clean P... Asus Maximus VI Formula 2 x Asus GTX 780 DCII w/ EK Full Cover Blocks a... Mushkin Red Line Ridgeback 2 x 8GB DDR302400 10... 
Hard DriveHard DriveOptical DriveCooling
2 x SAMSUNG 840 Pro Series MZ-7PD256BW 2.5" 256GB (2 x Seagate ST2000DX001 2TB 7200 RPM 64MB Cach... Asus BW-12B1ST/BLK/G/AS Blue Ray Writer 1 x Alphacool NexXxoS XT45-420 + 1 x Alphacool ... 
CoolingCoolingCoolingCooling
1 x Swiftech 35x2 w/ Heatsink and NB Fan EK -MultiOption RES X3 250 White Acetal Reservoir 5 x PH-F140SP_BK_BLED + 5 x PH-F140SP_BK E22 Rigid 10/12 Acrylic Tubing and Bitspower Ma... 
CoolingOSMonitorKeyboard
2 x Reeven Six Eyes Fan Controller Windows 7 64 Bit Professional OEM ASUS VG248QE Black 23" 144 Hz Monitor Logitech G19s 920-004985 
PowerCaseMouseAudio
Seasonic X-1250 Phanteks Enthoo Primo Ultimate Chassis Asus RoG GX950 Laser Mouse  Logitech Z5500 
  hide details  
Reply
911 Carrera
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel w/ EK Supremacy Cooling Block - Clean P... Asus Maximus VI Formula 2 x Asus GTX 780 DCII w/ EK Full Cover Blocks a... Mushkin Red Line Ridgeback 2 x 8GB DDR302400 10... 
Hard DriveHard DriveOptical DriveCooling
2 x SAMSUNG 840 Pro Series MZ-7PD256BW 2.5" 256GB (2 x Seagate ST2000DX001 2TB 7200 RPM 64MB Cach... Asus BW-12B1ST/BLK/G/AS Blue Ray Writer 1 x Alphacool NexXxoS XT45-420 + 1 x Alphacool ... 
CoolingCoolingCoolingCooling
1 x Swiftech 35x2 w/ Heatsink and NB Fan EK -MultiOption RES X3 250 White Acetal Reservoir 5 x PH-F140SP_BK_BLED + 5 x PH-F140SP_BK E22 Rigid 10/12 Acrylic Tubing and Bitspower Ma... 
CoolingOSMonitorKeyboard
2 x Reeven Six Eyes Fan Controller Windows 7 64 Bit Professional OEM ASUS VG248QE Black 23" 144 Hz Monitor Logitech G19s 920-004985 
PowerCaseMouseAudio
Seasonic X-1250 Phanteks Enthoo Primo Ultimate Chassis Asus RoG GX950 Laser Mouse  Logitech Z5500 
  hide details  
Reply
post #1582 of 18662
Quote:
Originally Posted by JackNaylorPE View Post

Unfortunately right now that includes the top three cards in each manufacturer's line at least if using multiple cards..... "Res Bracket II" will adress that problem for some of them. Hopefully Enthoo II will get the rest. [...]

It's 73mm wide. If you mount it on the bracket with the right side as far to the front of the case as you can get away with (since you'd have to drill your own holes for it or attach it however), there's room to use a Photon res w/ a 10.5" card with a few mm's to spare. It should be no issue with most of the card(s) available today. I know I could put a Titan or ref 780 in there with it.

The only thing getting in the way of multiple cards is the bracket itself, not the res.
Edited by Unicr0nhunter - 11/26/13 at 11:08am
post #1583 of 18662
Quote:
Originally Posted by Unicr0nhunter View Post

It's 73mm wide. If you mount it on the bracket with the right side as far to the front of the case as you can get away with (since you'd have to drill your own holes for it or attach it however), there's room to use a Photon res w/ a 10.5" card with a few mm's to spare. It should be no issue with most of the card(s) available today. I know I could put a Titan or ref 780 in there with it.

The only thing getting in the way of multiple cards is the bracket itself, not the res.

yes, reference cards work just fine .... it's the Classy's Lightnings, DCII's and such .... I calculated the fit some good 10 pages back and came yup with a theoretical 3mm to spare with the Photon. But looking at my 60mm installed, it looks like a bear w/ no room for error.



When i did the calcs, I worried that if it fit, if ya drill ya mount holes 1mm off, you culd be sunk. That space between Res and 10.5" card is just under 3mm in the pic above .... one on right just over 10mm

10mm + 3mm + 60mm = 73mm ... photon is 75mm wide with a 70mm tube..... can be done but very hard working in that small space.

I sooooo wanted a glass tube, acrylic already has marks on it from slidding in and outta bracket. If they had, or you drilled in, slots instead of hole for the res bracket mounting, where ya could have some wiggle room (say up to 5mm), I wuda taken a shot at it.
911 Carrera
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel w/ EK Supremacy Cooling Block - Clean P... Asus Maximus VI Formula 2 x Asus GTX 780 DCII w/ EK Full Cover Blocks a... Mushkin Red Line Ridgeback 2 x 8GB DDR302400 10... 
Hard DriveHard DriveOptical DriveCooling
2 x SAMSUNG 840 Pro Series MZ-7PD256BW 2.5" 256GB (2 x Seagate ST2000DX001 2TB 7200 RPM 64MB Cach... Asus BW-12B1ST/BLK/G/AS Blue Ray Writer 1 x Alphacool NexXxoS XT45-420 + 1 x Alphacool ... 
CoolingCoolingCoolingCooling
1 x Swiftech 35x2 w/ Heatsink and NB Fan EK -MultiOption RES X3 250 White Acetal Reservoir 5 x PH-F140SP_BK_BLED + 5 x PH-F140SP_BK E22 Rigid 10/12 Acrylic Tubing and Bitspower Ma... 
CoolingOSMonitorKeyboard
2 x Reeven Six Eyes Fan Controller Windows 7 64 Bit Professional OEM ASUS VG248QE Black 23" 144 Hz Monitor Logitech G19s 920-004985 
PowerCaseMouseAudio
Seasonic X-1250 Phanteks Enthoo Primo Ultimate Chassis Asus RoG GX950 Laser Mouse  Logitech Z5500 
  hide details  
Reply
911 Carrera
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel w/ EK Supremacy Cooling Block - Clean P... Asus Maximus VI Formula 2 x Asus GTX 780 DCII w/ EK Full Cover Blocks a... Mushkin Red Line Ridgeback 2 x 8GB DDR302400 10... 
Hard DriveHard DriveOptical DriveCooling
2 x SAMSUNG 840 Pro Series MZ-7PD256BW 2.5" 256GB (2 x Seagate ST2000DX001 2TB 7200 RPM 64MB Cach... Asus BW-12B1ST/BLK/G/AS Blue Ray Writer 1 x Alphacool NexXxoS XT45-420 + 1 x Alphacool ... 
CoolingCoolingCoolingCooling
1 x Swiftech 35x2 w/ Heatsink and NB Fan EK -MultiOption RES X3 250 White Acetal Reservoir 5 x PH-F140SP_BK_BLED + 5 x PH-F140SP_BK E22 Rigid 10/12 Acrylic Tubing and Bitspower Ma... 
CoolingOSMonitorKeyboard
2 x Reeven Six Eyes Fan Controller Windows 7 64 Bit Professional OEM ASUS VG248QE Black 23" 144 Hz Monitor Logitech G19s 920-004985 
PowerCaseMouseAudio
Seasonic X-1250 Phanteks Enthoo Primo Ultimate Chassis Asus RoG GX950 Laser Mouse  Logitech Z5500 
  hide details  
Reply
post #1584 of 18662
Yeah I'm going to use that industrial strength velcro (discussed above) to mount mine so I don't have to worry about getting the holes drilled perfect or not. wink.gif
post #1585 of 18662
Quote:
Originally Posted by Hereisphilly View Post

Are you running an overclock and delidded? If so that's awesome temps!

Just ran 1st OC Bench .... RoG Real Bench - 45 Multiplier / Offset / 1.3v / DDR3=1600
61-62-56-54
Ran Round 2 .... RoG Real Bench - 46 Multiplier / Offset / 1.363v / DDR3=1600
73-73-77-65

Just ran Round 3 .... RoG Real Bench - 46 Multiplier / Offset / 1.375v / DDR3=2400
77-74-69-66

46 was my target and didn't have to touch anything else so all rest at full strength....think I'll work on lowering voltage rather than 4.7.....
Edited by JackNaylorPE - 11/26/13 at 5:40pm
911 Carrera
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel w/ EK Supremacy Cooling Block - Clean P... Asus Maximus VI Formula 2 x Asus GTX 780 DCII w/ EK Full Cover Blocks a... Mushkin Red Line Ridgeback 2 x 8GB DDR302400 10... 
Hard DriveHard DriveOptical DriveCooling
2 x SAMSUNG 840 Pro Series MZ-7PD256BW 2.5" 256GB (2 x Seagate ST2000DX001 2TB 7200 RPM 64MB Cach... Asus BW-12B1ST/BLK/G/AS Blue Ray Writer 1 x Alphacool NexXxoS XT45-420 + 1 x Alphacool ... 
CoolingCoolingCoolingCooling
1 x Swiftech 35x2 w/ Heatsink and NB Fan EK -MultiOption RES X3 250 White Acetal Reservoir 5 x PH-F140SP_BK_BLED + 5 x PH-F140SP_BK E22 Rigid 10/12 Acrylic Tubing and Bitspower Ma... 
CoolingOSMonitorKeyboard
2 x Reeven Six Eyes Fan Controller Windows 7 64 Bit Professional OEM ASUS VG248QE Black 23" 144 Hz Monitor Logitech G19s 920-004985 
PowerCaseMouseAudio
Seasonic X-1250 Phanteks Enthoo Primo Ultimate Chassis Asus RoG GX950 Laser Mouse  Logitech Z5500 
  hide details  
Reply
911 Carrera
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel w/ EK Supremacy Cooling Block - Clean P... Asus Maximus VI Formula 2 x Asus GTX 780 DCII w/ EK Full Cover Blocks a... Mushkin Red Line Ridgeback 2 x 8GB DDR302400 10... 
Hard DriveHard DriveOptical DriveCooling
2 x SAMSUNG 840 Pro Series MZ-7PD256BW 2.5" 256GB (2 x Seagate ST2000DX001 2TB 7200 RPM 64MB Cach... Asus BW-12B1ST/BLK/G/AS Blue Ray Writer 1 x Alphacool NexXxoS XT45-420 + 1 x Alphacool ... 
CoolingCoolingCoolingCooling
1 x Swiftech 35x2 w/ Heatsink and NB Fan EK -MultiOption RES X3 250 White Acetal Reservoir 5 x PH-F140SP_BK_BLED + 5 x PH-F140SP_BK E22 Rigid 10/12 Acrylic Tubing and Bitspower Ma... 
CoolingOSMonitorKeyboard
2 x Reeven Six Eyes Fan Controller Windows 7 64 Bit Professional OEM ASUS VG248QE Black 23" 144 Hz Monitor Logitech G19s 920-004985 
PowerCaseMouseAudio
Seasonic X-1250 Phanteks Enthoo Primo Ultimate Chassis Asus RoG GX950 Laser Mouse  Logitech Z5500 
  hide details  
Reply
post #1586 of 18662
I don't know if anyone saw my earlier question about pumps. Is 1 MCP355 enough for 1 cpu, 2gpu, and 480,420,and 240? It will have 3 90* fittings (off rads)
Edited by shiv15 - 11/26/13 at 8:19pm
post #1587 of 18662
Quote:
Originally Posted by JackNaylorPE View Post

Just ran 1st OC Bench .... RoG Real Bench - 45 Multiplier / Offset / 1.3v / DDR3=1600
61-62-56-54
Ran Round 2 .... RoG Real Bench - 46 Multiplier / Offset / 1.363v / DDR3=1600
73-73-77-65

Just ran Round 3 .... RoG Real Bench - 46 Multiplier / Offset / 1.375v / DDR3=2400
77-74-69-66

46 was my target and didn't have to touch anything else so all rest at full strength....think I'll work on lowering voltage rather than 4.7.....

You would benefit massively from a delid, I have my i5-4670k running at between 48-55 max on aida, depending on the core, at 4.6 oc, with around 1.26V.
Yeah I stopped at 4.6, I have no doubt my chip will do it, I just want to get everything nice and stable for a bit before I get the oc itch
post #1588 of 18662
I have some questions regarding the fan hub:

I have 2 rads (480, 360) with 1 set of fans each. That's 7 rad-fans (GT AP14) + 3 included case fans. What I would like to do is combine them and connect them to the Enthoo-Primo Fan Hub and connect that to the cpu_fan header on my asrock extreme3 gen3.
Could I splice up to 3 or 4 GT fans together and have them occupy only one slot on the hub? Some of the case fans came with a Y-Splitter so I assume at least 2 can be combined. Since I might go for push-pull in the future (7 extra fans) I was trying to keep some slots on the fan hub empty.
The Gentle Typhoons also have a Molex connector which I am currently using. Once connected to the fan hub those wouldn't be needed anymore?

I hope this makes sense. Trying to reduce the cable mess in my Enthoo Primo's back blushsmiley.gif
post #1589 of 18662
Quote:
Originally Posted by smokedawg View Post

I have some questions regarding the fan hub:

I have 2 rads (480, 360) with 1 set of fans each. That's 7 rad-fans (GT AP14) + 3 included case fans. What I would like to do is combine them and connect them to the Enthoo-Primo Fan Hub and connect that to the cpu_fan header on my asrock extreme3 gen3.
Could I splice up to 3 or 4 GT fans together and have them occupy only one slot on the hub? Some of the case fans came with a Y-Splitter so I assume at least 2 can be combined. Since I might go for push-pull in the future (7 extra fans) I was trying to keep some slots on the fan hub empty.
The Gentle Typhoons also have a Molex connector which I am currently using. Once connected to the fan hub those wouldn't be needed anymore?

I hope this makes sense. Trying to reduce the cable mess in my Enthoo Primo's back blushsmiley.gif

Sure, you can use splitter cables from the ports on the hub, but keep in mind that the specs of the hub says it can only handle up to 11 fans. That should work for the 10 fans you currently have, but if you go push-pull you'll want to either add another fan hub (somewhere buried in this topic it was mentioned that Phanteks hinted they would be offering extra hubs at some point - I think January was mentioned but not positive about that) or use a fan controller.
post #1590 of 18662
Thread Starter 
I would not advise running more than 2 fans on each of the hub's headers. Each header has it's own circuit and components on the PCB. Running more than 2 fans on each may overload and burn something out. I think Phanteks' 11 fan control is figured by using the master rpm header with fan header #1 and using "Y" splitters with 2 fans on each of the other 5 headers (#2-6).. Total 11 fans.
Edited by doyll - 11/27/13 at 5:23am
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case PHANTEKS Case Club for lovers & owners