Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case PHANTEKS Case Club for lovers & owners
New Posts  All Forums:Forum Nav:

[Official] Case PHANTEKS Case Club for lovers & owners - Page 162

post #1611 of 18696
Quote:
Originally Posted by doyll View Post

10mm 7ply voidless solid birth plywood with overlap corner joints glued, drilled and tapped. Than prepped & painted with a good smooth coat of satin black paint and 30mm castors installed.

Is it mounted to the base, or just sitting on it?
post #1612 of 18696
Quote:
Originally Posted by doyll View Post

10mm 7ply voidless solid birth plywood with overlap corner joints glued, drilled and tapped. Than prepped & painted with a good smooth coat of satin black paint and 30mm castors installed.

Is it mounted to the base or just sitting on it?
post #1613 of 18696
Thread Starter 
Quote:
Originally Posted by grifftech View Post

Quote:
Originally Posted by doyll View Post

10mm 7ply voidless solid birth plywood with overlap corner joints glued, drilled and tapped. Than prepped & painted with a good smooth coat of satin black paint and 30mm castors installed.

Is it mounted to the base or just sitting on it?
Easy now! No need to double post! biggrin.gif

Case just sets on it. The rubber feet on case base hold it just fine. I've been making bases for years and never had any problem keeping case on them.
post #1614 of 18696
Quote:
Originally Posted by doyll View Post

Easy now! No need to double post! biggrin.gif

Case just sets on it. The rubber feet on case base hold it just fine. I've been making bases for years and never had any problem keeping case on them.

Cool, sorry for double post smile.gif Not sure how that happened
post #1615 of 18696
Thread Starter 
No problem. Just had to rib you about it. thumb.gif
post #1616 of 18696
Quote:
Originally Posted by borax View Post

Guys what is the maximum thickness of rad i can put at the top of the case in push pull, Triple 360mm?

It depends on MoBo....XT45 works...UT60 is a maybe depending on MoBo .... on my MV6 it wuda made it awful hard to access the MPCIE module and 9 Pin EPS connector

At 1400 rpm, the UT45 will give ya 247 watts of cooling, the UT60 will give ya 7 watts more at 254


Quote:
Originally Posted by jassilamba View Post


Between Maximus VI Formula users, there is finally great news from EK:

Linky Link

I don't get it.....how you pipe to that thing ? If you have SLI
Edited by JackNaylorPE - 11/27/13 at 12:17pm
911 Carrera
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel w/ EK Supremacy Cooling Block - Clean P... Asus Maximus VI Formula 2 x Asus GTX 780 DCII w/ EK Full Cover Blocks a... Mushkin Red Line Ridgeback 2 x 8GB DDR302400 10... 
Hard DriveHard DriveOptical DriveCooling
2 x SAMSUNG 840 Pro Series MZ-7PD256BW 2.5" 256GB (2 x Seagate ST2000DX001 2TB 7200 RPM 64MB Cach... Asus BW-12B1ST/BLK/G/AS Blue Ray Writer 1 x Alphacool NexXxoS XT45-420 + 1 x Alphacool ... 
CoolingCoolingCoolingCooling
1 x Swiftech 35x2 w/ Heatsink and NB Fan EK -MultiOption RES X3 250 White Acetal Reservoir 5 x PH-F140SP_BK_BLED + 5 x PH-F140SP_BK E22 Rigid 10/12 Acrylic Tubing and Bitspower Ma... 
CoolingOSMonitorKeyboard
2 x Reeven Six Eyes Fan Controller Windows 7 64 Bit Professional OEM ASUS VG248QE Black 23" 144 Hz Monitor Logitech G19s 920-004985 
PowerCaseMouseAudio
Seasonic X-1250 Phanteks Enthoo Primo Ultimate Chassis Asus RoG GX950 Laser Mouse  Logitech Z5500 
  hide details  
Reply
911 Carrera
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel w/ EK Supremacy Cooling Block - Clean P... Asus Maximus VI Formula 2 x Asus GTX 780 DCII w/ EK Full Cover Blocks a... Mushkin Red Line Ridgeback 2 x 8GB DDR302400 10... 
Hard DriveHard DriveOptical DriveCooling
2 x SAMSUNG 840 Pro Series MZ-7PD256BW 2.5" 256GB (2 x Seagate ST2000DX001 2TB 7200 RPM 64MB Cach... Asus BW-12B1ST/BLK/G/AS Blue Ray Writer 1 x Alphacool NexXxoS XT45-420 + 1 x Alphacool ... 
CoolingCoolingCoolingCooling
1 x Swiftech 35x2 w/ Heatsink and NB Fan EK -MultiOption RES X3 250 White Acetal Reservoir 5 x PH-F140SP_BK_BLED + 5 x PH-F140SP_BK E22 Rigid 10/12 Acrylic Tubing and Bitspower Ma... 
CoolingOSMonitorKeyboard
2 x Reeven Six Eyes Fan Controller Windows 7 64 Bit Professional OEM ASUS VG248QE Black 23" 144 Hz Monitor Logitech G19s 920-004985 
PowerCaseMouseAudio
Seasonic X-1250 Phanteks Enthoo Primo Ultimate Chassis Asus RoG GX950 Laser Mouse  Logitech Z5500 
  hide details  
Reply
post #1617 of 18696
Thanks for the info. I've chosen to go with an XT 45 dual in the bottom and a st30 360mm in the top. Top will be push pull bottom in push?
post #1618 of 18696
Quote:
Originally Posted by JackNaylorPE View Post

It depends on MoBo....XT45 works...UT60 is a maybe depending on MoBo .... on my MV6 it wuda made it awful hard to access the MPCIE module and 9 Pin EPS connector

At 1400 rpm, the UT45 will give ya 247 watts of cooling, the UT60 will give ya 7 watts more at 254
I don't get it.....how you pipe to that thing ? If you have SLI

And that my friend makes it a bad design. If I had the mobo, and if I was to get a block for it (I will NOT use the block that the board comes with), I will just use the VMR block. SB cooling is over-rated. Don't think you need a water block there.
post #1619 of 18696
Quote:
Originally Posted by borax View Post

Thanks for the info. I've chosen to go with an XT 45 dual in the bottom and a st30 360mm in the top. Top will be push pull bottom in push?

It depends on MoBo....XT45 works...UT60 is a maybe depending on MoBo .... on my MV6 it wuda made it awful hard to access the MPCIE module and 9 Pin EPS connector.... I have a XT45-420 on top and a UT60-280 in bottom using Phanteks fans..... with JUST push fans, water temps are 30C, CPU at 4.6 GHz 1.37v and 2 780's in SLI OC'd 32% .... I may not bothe rgetting 2nd set of fans

At 1400 rpm, the UT45 will give ya 247 watts of cooling, the UT60 will give ya 7 watts more at 254
I don't get it.....how you pipe to that thing ? If you have SLI[/quote]


Quote:
Originally Posted by jassilamba View Post

Typical loops do not need more than 1 pump. If you are running some really thick fluid with lots of additives, or if you have a lot of tight bends, you might need more than 1 pump.

Also the 35X pump top is one of the best pump tops for DDC pumps. Head pressure is the main thing when looking at pumps/tops.

I was mainly interested in redundancy and noise..... rather run two pumps at 50% than one at 100% .... Mainly tho, as this is a production box, I can't afford to have it down while I wait 3-4 weeks for a warranty replacement. One pump goes down, it can remain in use on the 2nd pump.

Though with 18 ninety degree bends, four 45's, 2 tees, I kinda like having the extra oomph.


Quote:
Originally Posted by jassilamba View Post

And that my friend makes it a bad design. If I had the mobo, and if I was to get a block for it (I will NOT use the block that the board comes with), I will just use the VMR block. SB cooling is over-rated. Don't think you need a water block there.

I have been using anodized aluminum in highly corrosive environments for over 25 years .... given that experience, I have no concerns in this regard. Evn if it fails, the only thing it can harm is itself as it is the less noble metal.
Edited by JackNaylorPE - 11/27/13 at 12:49pm
911 Carrera
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel w/ EK Supremacy Cooling Block - Clean P... Asus Maximus VI Formula 2 x Asus GTX 780 DCII w/ EK Full Cover Blocks a... Mushkin Red Line Ridgeback 2 x 8GB DDR302400 10... 
Hard DriveHard DriveOptical DriveCooling
2 x SAMSUNG 840 Pro Series MZ-7PD256BW 2.5" 256GB (2 x Seagate ST2000DX001 2TB 7200 RPM 64MB Cach... Asus BW-12B1ST/BLK/G/AS Blue Ray Writer 1 x Alphacool NexXxoS XT45-420 + 1 x Alphacool ... 
CoolingCoolingCoolingCooling
1 x Swiftech 35x2 w/ Heatsink and NB Fan EK -MultiOption RES X3 250 White Acetal Reservoir 5 x PH-F140SP_BK_BLED + 5 x PH-F140SP_BK E22 Rigid 10/12 Acrylic Tubing and Bitspower Ma... 
CoolingOSMonitorKeyboard
2 x Reeven Six Eyes Fan Controller Windows 7 64 Bit Professional OEM ASUS VG248QE Black 23" 144 Hz Monitor Logitech G19s 920-004985 
PowerCaseMouseAudio
Seasonic X-1250 Phanteks Enthoo Primo Ultimate Chassis Asus RoG GX950 Laser Mouse  Logitech Z5500 
  hide details  
Reply
911 Carrera
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel w/ EK Supremacy Cooling Block - Clean P... Asus Maximus VI Formula 2 x Asus GTX 780 DCII w/ EK Full Cover Blocks a... Mushkin Red Line Ridgeback 2 x 8GB DDR302400 10... 
Hard DriveHard DriveOptical DriveCooling
2 x SAMSUNG 840 Pro Series MZ-7PD256BW 2.5" 256GB (2 x Seagate ST2000DX001 2TB 7200 RPM 64MB Cach... Asus BW-12B1ST/BLK/G/AS Blue Ray Writer 1 x Alphacool NexXxoS XT45-420 + 1 x Alphacool ... 
CoolingCoolingCoolingCooling
1 x Swiftech 35x2 w/ Heatsink and NB Fan EK -MultiOption RES X3 250 White Acetal Reservoir 5 x PH-F140SP_BK_BLED + 5 x PH-F140SP_BK E22 Rigid 10/12 Acrylic Tubing and Bitspower Ma... 
CoolingOSMonitorKeyboard
2 x Reeven Six Eyes Fan Controller Windows 7 64 Bit Professional OEM ASUS VG248QE Black 23" 144 Hz Monitor Logitech G19s 920-004985 
PowerCaseMouseAudio
Seasonic X-1250 Phanteks Enthoo Primo Ultimate Chassis Asus RoG GX950 Laser Mouse  Logitech Z5500 
  hide details  
Reply
post #1620 of 18696
Quote:
Originally Posted by JackNaylorPE View Post

It depends on MoBo....XT45 works...UT60 is a maybe depending on MoBo .... on my MV6 it wuda made it awful hard to access the MPCIE module and 9 Pin EPS connector.... I have a XT45-420 on top and a UT60-280 in bottom using Phanteks fans..... with JUST push fans, water temps are 30C, CPU at 4.6 GHz 1.37v and 2 780's in SLI OC'd 32% .... I may not bothe rgetting 2nd set of fans

At 1400 rpm, the UT45 will give ya 247 watts of cooling, the UT60 will give ya 7 watts more at 254
I don't get it.....how you pipe to that thing ? If you have SLI
I was mainly interested in redundancy and noise..... rather run two pumps at 50% than one at 100% .... Mainly tho, as this is a production box, I can't afford to have it down while I wait 3-4 weeks for a warranty replacement. One pump goes down, it can remain in use on the 2nd pump.

Though with 18 ninety degree bends, four 45's, 2 tees, I kinda like having the extra oomph.


[/quote]
Quote:
Originally Posted by jassilamba View Post

And that my friend makes it a bad design. If I had the mobo, and if I was to get a block for it (I will NOT use the block that the board comes with), I will just use the VMR block. SB cooling is over-rated. Don't think you need a water block there.

I have been using anodized aluminum in highly corrosive environments for over 25 years .... given that experience, I have no concerns in this regard. Evn if it fails, the only thing it can harm is itself as it is the less noble metal.
911 Carrera
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel w/ EK Supremacy Cooling Block - Clean P... Asus Maximus VI Formula 2 x Asus GTX 780 DCII w/ EK Full Cover Blocks a... Mushkin Red Line Ridgeback 2 x 8GB DDR302400 10... 
Hard DriveHard DriveOptical DriveCooling
2 x SAMSUNG 840 Pro Series MZ-7PD256BW 2.5" 256GB (2 x Seagate ST2000DX001 2TB 7200 RPM 64MB Cach... Asus BW-12B1ST/BLK/G/AS Blue Ray Writer 1 x Alphacool NexXxoS XT45-420 + 1 x Alphacool ... 
CoolingCoolingCoolingCooling
1 x Swiftech 35x2 w/ Heatsink and NB Fan EK -MultiOption RES X3 250 White Acetal Reservoir 5 x PH-F140SP_BK_BLED + 5 x PH-F140SP_BK E22 Rigid 10/12 Acrylic Tubing and Bitspower Ma... 
CoolingOSMonitorKeyboard
2 x Reeven Six Eyes Fan Controller Windows 7 64 Bit Professional OEM ASUS VG248QE Black 23" 144 Hz Monitor Logitech G19s 920-004985 
PowerCaseMouseAudio
Seasonic X-1250 Phanteks Enthoo Primo Ultimate Chassis Asus RoG GX950 Laser Mouse  Logitech Z5500 
  hide details  
Reply
911 Carrera
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel w/ EK Supremacy Cooling Block - Clean P... Asus Maximus VI Formula 2 x Asus GTX 780 DCII w/ EK Full Cover Blocks a... Mushkin Red Line Ridgeback 2 x 8GB DDR302400 10... 
Hard DriveHard DriveOptical DriveCooling
2 x SAMSUNG 840 Pro Series MZ-7PD256BW 2.5" 256GB (2 x Seagate ST2000DX001 2TB 7200 RPM 64MB Cach... Asus BW-12B1ST/BLK/G/AS Blue Ray Writer 1 x Alphacool NexXxoS XT45-420 + 1 x Alphacool ... 
CoolingCoolingCoolingCooling
1 x Swiftech 35x2 w/ Heatsink and NB Fan EK -MultiOption RES X3 250 White Acetal Reservoir 5 x PH-F140SP_BK_BLED + 5 x PH-F140SP_BK E22 Rigid 10/12 Acrylic Tubing and Bitspower Ma... 
CoolingOSMonitorKeyboard
2 x Reeven Six Eyes Fan Controller Windows 7 64 Bit Professional OEM ASUS VG248QE Black 23" 144 Hz Monitor Logitech G19s 920-004985 
PowerCaseMouseAudio
Seasonic X-1250 Phanteks Enthoo Primo Ultimate Chassis Asus RoG GX950 Laser Mouse  Logitech Z5500 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case PHANTEKS Case Club for lovers & owners