Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case PHANTEKS Case Club for lovers & owners
New Posts  All Forums:Forum Nav:

[Official] Case PHANTEKS Case Club for lovers & owners - Page 1870

post #18691 of 19205
hie there, i will be the proud owner of the enthoo elite soon, does anyone have this case ? i got some question, especialy if you watercooled it


mat
post #18692 of 19205
Quote:
Originally Posted by Martin778 View Post

I got my Enthoo Luxe TG. Have a small issue with it, I have 3x140mm vardars and the 2 front fans connected to the hub on the back, I think the LED controller is also connected to it. The hub is then connected to CPU_FAN1
Every time I adjust the CPU fan speed I get a hard whining noise and the fans seem to stall every few seconds. Is it the LED PWM controller?! I thought it was the pump, but nope.
https://www.youtube.com/watch?v=dwlqjyLfMJo

Hi there

Maybe I'm wrong with that, you shouldn't run or connect PWM or mix PWM and non PWM fans on Phanteks hub there as this can cause issues on longer run

I have never run PWM fans on this Phanteks hub and due this I'm maybe on this one just wrong

Can you try run on this Phanteks hub run only stock Phanteks fans and then try run on this hub again EK Vardar fans, I'm pretty sure these fans pulls more amperage than Phanteks fans

Hope this helps

Thanks, Jura
     
CPUMotherboardGraphicsGraphics
Intel i7-5820k 4.4GHz ASRock X99 Extreme6 EVGA GTX 1080Ti Founders Edition  EVGA GTX 1080 Founders Edition  
GraphicsRAMHard DriveHard Drive
Manli GTX 1080 Founders Edition  Corsair Vengeance LPX 2133MHz 6x16GB Samsung 840 EVO 1TB SSD SanDisk 480GB 
Hard DriveHard DriveHard DriveHard Drive
Toshiba DT01ACA300 3TB Crucial M500 960GB WD 4TB WD 500GB 
Hard DriveCoolingCoolingCooling
Segeate SSHD 2TB EK-Supremacy EVO  6x Barrow 13/10 fitting Barrow G1/4" Silver 41mm - 69mm Retractable Adj... 
CoolingCoolingCoolingCooling
Barrow G1/4" Silver 22mm-31mm Retractable Adjus... Mayhems UV White 13/10 tubing EK-FC Titan X Pascal with EKWB Backplate  2x EK-FC1080 GTX - Acetal+Nickel with EKWB Bac... 
CoolingCoolingCoolingCooling
Mayehms Pastel Red Noiseblocker BlackSilent XLP EK-CoolStream XE 360 radiator  EK-DDC 3.2 PWM Elite Edition 
CoolingCoolingCoolingCooling
EK-RES X3 150 Mayhems Havoc 240 radiator XSPC 120mm radiator 8x EK-ACF Fitting 13/10mm  
CoolingCoolingOSOS
2x XSPC 13/10 2X 45 Barrow fitting Win 7 64Bit OSX Yosemite 10.10.5 
MonitorMonitorKeyboardPower
AOC Q2577W AOC Q2577W Ducky DK2108 Corsair AX760i 
CaseMouseMouse PadAudio
Phanteks Enthoo Primo Special Edition Black/Red Corsair M65 RGB Steelseries  Avid MBox 2 Mini 
Other
Aquaero 6XT 
  hide details  
Reply
     
CPUMotherboardGraphicsGraphics
Intel i7-5820k 4.4GHz ASRock X99 Extreme6 EVGA GTX 1080Ti Founders Edition  EVGA GTX 1080 Founders Edition  
GraphicsRAMHard DriveHard Drive
Manli GTX 1080 Founders Edition  Corsair Vengeance LPX 2133MHz 6x16GB Samsung 840 EVO 1TB SSD SanDisk 480GB 
Hard DriveHard DriveHard DriveHard Drive
Toshiba DT01ACA300 3TB Crucial M500 960GB WD 4TB WD 500GB 
Hard DriveCoolingCoolingCooling
Segeate SSHD 2TB EK-Supremacy EVO  6x Barrow 13/10 fitting Barrow G1/4" Silver 41mm - 69mm Retractable Adj... 
CoolingCoolingCoolingCooling
Barrow G1/4" Silver 22mm-31mm Retractable Adjus... Mayhems UV White 13/10 tubing EK-FC Titan X Pascal with EKWB Backplate  2x EK-FC1080 GTX - Acetal+Nickel with EKWB Bac... 
CoolingCoolingCoolingCooling
Mayehms Pastel Red Noiseblocker BlackSilent XLP EK-CoolStream XE 360 radiator  EK-DDC 3.2 PWM Elite Edition 
CoolingCoolingCoolingCooling
EK-RES X3 150 Mayhems Havoc 240 radiator XSPC 120mm radiator 8x EK-ACF Fitting 13/10mm  
CoolingCoolingOSOS
2x XSPC 13/10 2X 45 Barrow fitting Win 7 64Bit OSX Yosemite 10.10.5 
MonitorMonitorKeyboardPower
AOC Q2577W AOC Q2577W Ducky DK2108 Corsair AX760i 
CaseMouseMouse PadAudio
Phanteks Enthoo Primo Special Edition Black/Red Corsair M65 RGB Steelseries  Avid MBox 2 Mini 
Other
Aquaero 6XT 
  hide details  
Reply
post #18693 of 19205
Congrats. You will love this case. Im still working on my dual loop for it. I also will be pulling it all out in a few weeks
To put in a rampage 6 extreme and a 7820x with ek mono block. Its my first custom loop for this but the case is awesome. Will help if i can.

    
CPUMotherboardGraphicsGraphics
Intel Core i7 4930K OC 4.5GHz RAMPAGE IV BLACK EDITION EVGA GeForce GTX 980 Ti 06G-P4-4995-KR 6GB SC+ ... EVGA GeForce GTX 980 Ti 06G-P4-4995-KR 6GB SC+ ... 
RAMHard DriveCoolingOS
Corsair Platinum CMD32GX3M4A2400C10 WD Black- 7200 RPM SATA 6 Gb/s 64MB Cache 3.5 I... Corsair Hydro Series™ H100i GTX Extreme Perform... Windows 10 64bit 
MonitorCase
Acer XB280HK bprz Black 28" 1ms 4K UKD Widescre... Corsair Graphite Series 760T Black Full Tower W... 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
Intel Core i7 4930K OC 4.5GHz RAMPAGE IV BLACK EDITION EVGA GeForce GTX 980 Ti 06G-P4-4995-KR 6GB SC+ ... EVGA GeForce GTX 980 Ti 06G-P4-4995-KR 6GB SC+ ... 
RAMHard DriveCoolingOS
Corsair Platinum CMD32GX3M4A2400C10 WD Black- 7200 RPM SATA 6 Gb/s 64MB Cache 3.5 I... Corsair Hydro Series™ H100i GTX Extreme Perform... Windows 10 64bit 
MonitorCase
Acer XB280HK bprz Black 28" 1ms 4K UKD Widescre... Corsair Graphite Series 760T Black Full Tower W... 
  hide details  
Reply
post #18694 of 19205
Quote:
Originally Posted by jura11 View Post

Hi there

Maybe I'm wrong with that, you shouldn't run or connect PWM or mix PWM and non PWM fans on Phanteks hub there as this can cause issues on longer run

I have never run PWM fans on this Phanteks hub and due this I'm maybe on this one just wrong

Can you try run on this Phanteks hub run only stock Phanteks fans and then try run on this hub again EK Vardar fans, I'm pretty sure these fans pulls more amperage than Phanteks fans

Hope this helps

Thanks, Jura

I think it would just run the fans on voltage control.
Magicbox
(17 items)
 
crapbox
(13 items)
 
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 AX370-Gamin K7 Nitro+ RX480 Corsair LPX 
Hard DriveHard DriveHard DriveCooling
Samsung 850 EVO  Kingston HyperX 3K Seagate Barracuda 7200.14 Noctua NH-D15 
OSOSMonitorKeyboard
Kubuntu  Windows 10 Pro Dell U2515H CM Quickfire TK (Cherry Blue) 
PowerCaseMouseMouse Pad
EVGA 750 G2 Enthoo Pro Logitech G502 Logitech G440 
CPUMotherboardGraphicsRAM
Sempron 3300+ HP stock mobo (laptop) 200M (IGP) 2x1GB PC3200 
Hard DriveOptical DriveOSMonitor
100GB ATA133 DVD/CDRW Kubuntu 32 bit 14.1" (1280x768) 
Power
6 cell 
  hide details  
Reply
Magicbox
(17 items)
 
crapbox
(13 items)
 
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 AX370-Gamin K7 Nitro+ RX480 Corsair LPX 
Hard DriveHard DriveHard DriveCooling
Samsung 850 EVO  Kingston HyperX 3K Seagate Barracuda 7200.14 Noctua NH-D15 
OSOSMonitorKeyboard
Kubuntu  Windows 10 Pro Dell U2515H CM Quickfire TK (Cherry Blue) 
PowerCaseMouseMouse Pad
EVGA 750 G2 Enthoo Pro Logitech G502 Logitech G440 
CPUMotherboardGraphicsRAM
Sempron 3300+ HP stock mobo (laptop) 200M (IGP) 2x1GB PC3200 
Hard DriveOptical DriveOSMonitor
100GB ATA133 DVD/CDRW Kubuntu 32 bit 14.1" (1280x768) 
Power
6 cell 
  hide details  
Reply
post #18695 of 19205
Quote:
Originally Posted by FIDDY57 View Post

Congrats. You will love this case. Im still working on my dual loop for it. I also will be pulling it all out in a few weeks
To put in a rampage 6 extreme and a 7820x with ek mono block. Its my first custom loop for this but the case is awesome. Will help if i can.


hie,

could you put more picture of your build (multiple angle) ? did put some pump in the area for cable management ? ( on the other side)

where did you put the hard drive ? i plan on puting 6 of them

also tag me next time ahaha lucky i saw your post
post #18696 of 19205
Thread Starter 
Quote:
Originally Posted by Martin778 View Post

I got my Enthoo Luxe TG. Have a small issue with it, I have 3x140mm vardars and the 2 front fans connected to the hub on the back, I think the LED controller is also connected to it. The hub is then connected to CPU_FAN1
Every time I adjust the CPU fan speed I get a hard whining noise and the fans seem to stall every few seconds. Is it the LED PWM controller?! I thought it was the pump, but nope.
https://www.youtube.com/watch?v=dwlqjyLfMJo
Do you mean Enthoo Luxe LED connector or maybe Phanteks LED adapter? Neither one of these should be connected to the PWM fan hub, but should be connected to motherboard RGB LED header on RGB LED compatible motherboard.
Quote:
Originally Posted by jura11 View Post

Hi there

Maybe I'm wrong with that, you shouldn't run or connect PWM or mix PWM and non PWM fans on Phanteks hub there as this can cause issues on longer run

I have never run PWM fans on this Phanteks hub and due this I'm maybe on this one just wrong

Can you try run on this Phanteks hub run only stock Phanteks fans and then try run on this hub again EK Vardar fans, I'm pretty sure these fans pulls more amperage than Phanteks fans

Hope this helps

Thanks, Jura
What Melcar said thumb.gif
PWM fans plugged into Phanteks PWM controlled fan hub will be variable voltage controlled. This means if PWM fans have LEDs they may not function properly .. reason being PWM fans with LEDs on PWM header get constant 12v power to LEDs and internal PWM circuitry. Internal PWM circuitry then sends 12v pulses to fan motor to control speed bases on PWM signal, but LEDs get constant 12v power.
Edited by doyll - 9/25/17 at 5:17am
post #18697 of 19205
I'm not sure how the connections look like, I only have the two build in LED lights on both sides of the case, the ones you can change the color of with a button on the front panel.
However I don't think these have any PWM? I think they just connect to SATA power, nothing more.

What I do have connected to the hub on the back are 3x 140mm vardars and 2x 140mm stock Phanteks front fans.
post #18698 of 19205
Thread Starter 
Quote:
Originally Posted by Martin778 View Post

I'm not sure how the connections look like, I only have the two build in LED lights on both sides of the case, the ones you can change the color of with a button on the front panel.
However I don't think these have any PWM? I think they just connect to SATA power, nothing more.

What I do have connected to the hub on the back are 3x 140mm vardars and 2x 140mm stock Phanteks front fans.
In your original post you said:
Quote:
Originally Posted by Martin778 View Post

I got my Enthoo Luxe TG. Have a small issue with it, I have 3x140mm vardars and the 2 front fans connected to the hub on the back, I think the LED controller is also connected to it. The hub is then connected to CPU_FAN1
Every time I adjust the CPU fan speed I get a hard whining noise and the fans seem to stall every few seconds. Is it the LED PWM controller?! I thought it was the pump, but nope.
https://www.youtube.com/watch?v=dwlqjyLfMJo
I've underlined the part about LED controller.

LED controller should not be plugged into fan hub.
post #18699 of 19205
I thought I did because there are some 3/4 pin connectors connected to each other around the front panel but the stock lighting seems to only draw power from SATA.
post #18700 of 19205
Thread Starter 
Quote:
Originally Posted by Martin778 View Post

I thought I did because there are some 3/4 pin connectors connected to each other around the front panel but the stock lighting seems to only draw power from SATA.
Whatever, you don't want anything plugged to fan hub that is not just an ordinary 3-pin fan. That will eliminate any possibility for something else on fan hub to be causing problems.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case PHANTEKS Case Club for lovers & owners