Originally Posted by Jared485
I have the 5 fans plus 2 more sp120 fans. at 100% they take off and go good but below 50 percent they randomly stop and slow down. 3 fans will be going good and 4 will be going slow then all of the sudden 2 of the fast fans slow down and 2 of the slower ones speed up. It looks like the wattage is being thrown from fan to fan or something i dont know. Im gettting a fan controller in the mail soon i ordered it along with some extensions and i know thatll fix it but in the mean time its just no working right. I have the profiles and everything set and it says the fans are spinning at 1300+- rpm but sopme are barely spinning while others appear to be going 1300+- rpm
You have profiles in what ? FanXpert 2 ?
Did you run the calibration procedure ?
You have only one fan on Channel 1 ?
Try taking off the SP120s....and see if ya still have the proble.
MoBo Header CHA_1 => Phanteks PCB => 5 Phanteks fans, 1 on Channel 1 and two each on channels whatever
MoBo Header CHA_2 =>SP120
MoBo Header CHA_3 =>SP120
I'd suggest that you get a 2nd Fan PCB and put the SP120s on that
Originally Posted by Roxycon
Btw, how do you guys manage the cables when Utilizing the bracket(s) on the side of the 5,25" bays?
Currently i have a big clutter of molexes in the odd bay
I changed the mountings .... OCD requires straight cables and every which way I tried was unsatisfactory..... so I took the mounting thingie and stuck it in a HD tray, problem solved. One day I will actually affix it in place instead of the current system....rubber band Edited by JackNaylorPE - 2/20/14 at 3:28pm