Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case PHANTEKS Case Club for lovers & owners
New Posts  All Forums:Forum Nav:

[Official] Case PHANTEKS Case Club for lovers & owners - Page 56

post #551 of 18662
Quote:
Originally Posted by doyll View Post

If I put a box the same size as monsta with fans on top will the screaming stop? whistle.gif

Well technically there is no screaming, but yes you can use that area to house a small ITX build lol.

At the end of the day its about using what you have and making it look nice.
post #552 of 18662
Quote:
Originally Posted by Unicr0nhunter View Post

Yeah, definitely have thought of that, but I'll be using rigid acrylic tubing so doing the bends going to the pump and back seems like it would be a challenge, not sure it's one that I'd be able to pull off or not, plus it wouldn't be as clean of a loop as I had been mapping out with the res/pump combo. Rigid tubing also rules out any sort of quick disconnects. :

I'm using acrylic tubing also .... have a schematic ya can look at in Post 518

Not sure why rigid tubing rules out a quick disconnect ?

Rigid tube -> Compression Fitting -> Male QD Ftting ....... then the detachable (store in a drawer) part is Female QD Fitting -> Compression Fitting -> 2-3' Flex tube
911 Carrera
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel w/ EK Supremacy Cooling Block - Clean P... Asus Maximus VI Formula 2 x Asus GTX 780 DCII w/ EK Full Cover Blocks a... Mushkin Red Line Ridgeback 2 x 8GB DDR302400 10... 
Hard DriveHard DriveOptical DriveCooling
2 x SAMSUNG 840 Pro Series MZ-7PD256BW 2.5" 256GB (2 x Seagate ST2000DX001 2TB 7200 RPM 64MB Cach... Asus BW-12B1ST/BLK/G/AS Blue Ray Writer 1 x Alphacool NexXxoS XT45-420 + 1 x Alphacool ... 
CoolingCoolingCoolingCooling
1 x Swiftech 35x2 w/ Heatsink and NB Fan EK -MultiOption RES X3 250 White Acetal Reservoir 5 x PH-F140SP_BK_BLED + 5 x PH-F140SP_BK E22 Rigid 10/12 Acrylic Tubing and Bitspower Ma... 
CoolingOSMonitorKeyboard
2 x Reeven Six Eyes Fan Controller Windows 7 64 Bit Professional OEM ASUS VG248QE Black 23" 144 Hz Monitor Logitech G19s 920-004985 
PowerCaseMouseAudio
Seasonic X-1250 Phanteks Enthoo Primo Ultimate Chassis Asus RoG GX950 Laser Mouse  Logitech Z5500 
  hide details  
Reply
911 Carrera
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel w/ EK Supremacy Cooling Block - Clean P... Asus Maximus VI Formula 2 x Asus GTX 780 DCII w/ EK Full Cover Blocks a... Mushkin Red Line Ridgeback 2 x 8GB DDR302400 10... 
Hard DriveHard DriveOptical DriveCooling
2 x SAMSUNG 840 Pro Series MZ-7PD256BW 2.5" 256GB (2 x Seagate ST2000DX001 2TB 7200 RPM 64MB Cach... Asus BW-12B1ST/BLK/G/AS Blue Ray Writer 1 x Alphacool NexXxoS XT45-420 + 1 x Alphacool ... 
CoolingCoolingCoolingCooling
1 x Swiftech 35x2 w/ Heatsink and NB Fan EK -MultiOption RES X3 250 White Acetal Reservoir 5 x PH-F140SP_BK_BLED + 5 x PH-F140SP_BK E22 Rigid 10/12 Acrylic Tubing and Bitspower Ma... 
CoolingOSMonitorKeyboard
2 x Reeven Six Eyes Fan Controller Windows 7 64 Bit Professional OEM ASUS VG248QE Black 23" 144 Hz Monitor Logitech G19s 920-004985 
PowerCaseMouseAudio
Seasonic X-1250 Phanteks Enthoo Primo Ultimate Chassis Asus RoG GX950 Laser Mouse  Logitech Z5500 
  hide details  
Reply
post #553 of 18662
Man I need to get this case in... like now. Don't see many yellow themed builds out there, got my primochill primoflex tubing in (yellow). Normally I dont care for the primoflex as it is rather stiff, but I made an exception since I liked the yellow. Also have a cheap blue led strip coming so I will slap a molex on it. My 780 lightning card has rather bright blue led's on the VRM and MSI logo so I am somewhat forced into the blue/yellow options.

Any other ideas for yellow stuff? I have some yellow LED's for my raystorm cpu block also.
post #554 of 18662
Quote:
Originally Posted by JackNaylorPE View Post

I'm using acrylic tubing also .... have a schematic ya can look at in Post 518

Not sure why rigid tubing rules out a quick disconnect ?

Rigid tube -> Compression Fitting -> Male QD Ftting ....... then the detachable (store in a drawer) part is Female QD Fitting -> Compression Fitting -> 2-3' Flex tube

See the discussion here:
http://www.overclock.net/t/1388300/acrylic-pipebending-101/670#post_20938389
post #555 of 18662
Quote:
Originally Posted by bond32 View Post

Man I need to get this case in... like now. Don't see many yellow themed builds out there, got my primochill primoflex tubing in (yellow). Normally I dont care for the primoflex as it is rather stiff, but I made an exception since I liked the yellow. Also have a cheap blue led strip coming so I will slap a molex on it. My 780 lightning card has rather bright blue led's on the VRM and MSI logo so I am somewhat forced into the blue/yellow options.

Any other ideas for yellow stuff? I have some yellow LED's for my raystorm cpu block also.

Replace the LED in the power button to yellow, along with the HDD activity LED.

You can also look at Akasa fans, they have some really nice PWM fans with yellow blades, and black shourds.
Paint the plate on the Raystorm to yellow as well.
Blue LEDs behind the motherboard.

Those are just few I can think off.
post #556 of 18662
Quote:
Originally Posted by bond32 View Post

Man I need to get this case in... like now. Don't see many yellow themed builds out there, got my primochill primoflex tubing in (yellow). Normally I dont care for the primoflex as it is rather stiff, but I made an exception since I liked the yellow. Also have a cheap blue led strip coming so I will slap a molex on it. My 780 lightning card has rather bright blue led's on the VRM and MSI logo so I am somewhat forced into the blue/yellow options.

Any other ideas for yellow stuff? I have some yellow LED's for my raystorm cpu block also.

evolv
(22 items)
 
  
CPUMotherboardGraphicsRAM
i7 4790k msi z97m GTX 1080 corsair vengeance pro 
Hard DriveCoolingCoolingCooling
samsung evo  ek coolstream PE 240 ek coolstream PE 240 DDC pump 
CoolingCoolingCoolingOS
ek supremacy evo ek GTX 1080 full cover block  EK vardar F1 windows 10 pro 
MonitorMonitorMonitorKeyboard
Philips 40" 4K LED BDM4065UC/00 GW2750 GW2750 CM masterkeys TKL 
PowerCaseMouseMouse Pad
corsair ax1200 phanteks enthoo evolv mATX razer naga qpad xxl 
AudioAudio
ASUS ROG xonar phoebus Sennheiser HD600 
  hide details  
Reply
evolv
(22 items)
 
  
CPUMotherboardGraphicsRAM
i7 4790k msi z97m GTX 1080 corsair vengeance pro 
Hard DriveCoolingCoolingCooling
samsung evo  ek coolstream PE 240 ek coolstream PE 240 DDC pump 
CoolingCoolingCoolingOS
ek supremacy evo ek GTX 1080 full cover block  EK vardar F1 windows 10 pro 
MonitorMonitorMonitorKeyboard
Philips 40" 4K LED BDM4065UC/00 GW2750 GW2750 CM masterkeys TKL 
PowerCaseMouseMouse Pad
corsair ax1200 phanteks enthoo evolv mATX razer naga qpad xxl 
AudioAudio
ASUS ROG xonar phoebus Sennheiser HD600 
  hide details  
Reply
post #557 of 18662
Quote:
Originally Posted by jassilamba View Post

Replace the LED in the power button to yellow, along with the HDD activity LED.

You can also look at Akasa fans, they have some really nice PWM fans with yellow blades, and black shourds.
Paint the plate on the Raystorm to yellow as well.
Blue LEDs behind the motherboard.

Those are just few I can think off.

Good ideas... Not much of a painter. But I do like those fans...
post #558 of 18662
Quote:
Originally Posted by bond32 View Post

Good ideas... Not much of a painter. But I do like those fans...
If you got your hands on an MSI mpower board then it would look boss!
post #559 of 18662
Quote:
Originally Posted by Hereisphilly View Post

If you got your hands on an MSI mpower board then it would look boss!

I do! It looks fantastic paired with the lightning, although the lightning is so gigantic it steals the show. Also both have the same LED (blue) so they look great together. Only issue so far is matching to these. The blue LED's that I have with my XSPC kit aren't near the same shade blue and they don't match at all. The yellow LED's I have look better but still not quite what I was hoping for. I think once it is all in the case the yellow tubing will look fantastic.
post #560 of 18662
Quote:
Originally Posted by bond32 View Post

I do! It looks fantastic paired with the lightning, although the lightning is so gigantic it steals the show. Also both have the same LED (blue) so they look great together. Only issue so far is matching to these. The blue LED's that I have with my XSPC kit aren't near the same shade blue and they don't match at all. The yellow LED's I have look better but still not quite what I was hoping for. I think once it is all in the case the yellow tubing will look fantastic.

Either get some yellow and black cable extensions, or sleeve them. And you are done.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case PHANTEKS Case Club for lovers & owners