Overclock.net › Forums › Software, Programming and Coding › Operating Systems › Windows › Crash Analysis and Debugging › Nonstop blue screens. Need help!
New Posts  All Forums:Forum Nav:

Nonstop blue screens. Need help! - Page 2

post #11 of 18
yeah, could also be timing issues too, or a bad stick in the set... try booting with a single stick of RAM... if it works, then add another, see if that works, continue adding until it fails, then try the last stick by itself... if it doesn't boot with that single stick, that stick is No good. If it still boots, it might be an IMC issue, and may need a bit more voltage on the memory controller, but I'm not overly familiar with Haswell, so I'll leave that troubleshooting to someone else.
SR2 PWNS J00
(22 items)
 
SL4V3
(16 items)
 
 
CPUMotherboardGraphicsRAM
2x intel Xeon X5650 @ 4Ghz Evga SR-2 SLi Evga GTX480s 18GB G.SKill Pi 1600 DDR3 
Hard DriveHard DriveHard DriveOptical Drive
60GB Vertex 3 2TB Western Digital Black 2TB External HDD (USB 2) 22x Sata Bluray/DVD Multi Drive 
CoolingCoolingCoolingCooling
Hardware Labs GTX 360 Radiator EK Supreme HF Copper Danger Den GTX480 Waterblock All Copper Natemandoo SR-2 Solid Copper Waterblock 
CoolingCoolingOSMonitor
Iwaki RD-30 D5 with DCThermo Top Windows 7 Ultimate 3x 24" LG LCDs (16:9) 
KeyboardPowerCaseMouse
Ducky Shine MX-Cherry Black Mechanical Keyboard... 1500W Silver stone Strider Mountain Mods Extended Ascension Horizon Razer Mamba 2012 (wired) 
Mouse PadAudio
Razer XactMat Asus Xonar SXT 
CPUMotherboardGraphicsRAM
intel Q6600 ASUS P5K-E Wifi AMD HD Radeon 6990 4GBs G.skill HZs 
Hard DriveOptical DriveCoolingOS
OCZ vertex 2 LG 22x combo drive Cooler Master hyper 212+ Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
LG FLATRON L1933TR LG FLATRON L1933TR Logitech G15 rev. 1 Silverstone Decathlon 750W modular PSU 
CaseMouseMouse PadAudio
Thermaltake Armor with 250mm side fan Logitech 2000dpi USB mouse Steel series QcK+ Auzentech X-Fi prelude 
  hide details  
Reply
SR2 PWNS J00
(22 items)
 
SL4V3
(16 items)
 
 
CPUMotherboardGraphicsRAM
2x intel Xeon X5650 @ 4Ghz Evga SR-2 SLi Evga GTX480s 18GB G.SKill Pi 1600 DDR3 
Hard DriveHard DriveHard DriveOptical Drive
60GB Vertex 3 2TB Western Digital Black 2TB External HDD (USB 2) 22x Sata Bluray/DVD Multi Drive 
CoolingCoolingCoolingCooling
Hardware Labs GTX 360 Radiator EK Supreme HF Copper Danger Den GTX480 Waterblock All Copper Natemandoo SR-2 Solid Copper Waterblock 
CoolingCoolingOSMonitor
Iwaki RD-30 D5 with DCThermo Top Windows 7 Ultimate 3x 24" LG LCDs (16:9) 
KeyboardPowerCaseMouse
Ducky Shine MX-Cherry Black Mechanical Keyboard... 1500W Silver stone Strider Mountain Mods Extended Ascension Horizon Razer Mamba 2012 (wired) 
Mouse PadAudio
Razer XactMat Asus Xonar SXT 
CPUMotherboardGraphicsRAM
intel Q6600 ASUS P5K-E Wifi AMD HD Radeon 6990 4GBs G.skill HZs 
Hard DriveOptical DriveCoolingOS
OCZ vertex 2 LG 22x combo drive Cooler Master hyper 212+ Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
LG FLATRON L1933TR LG FLATRON L1933TR Logitech G15 rev. 1 Silverstone Decathlon 750W modular PSU 
CaseMouseMouse PadAudio
Thermaltake Armor with 250mm side fan Logitech 2000dpi USB mouse Steel series QcK+ Auzentech X-Fi prelude 
  hide details  
Reply
post #12 of 18
Op, that graphic card need a least 600w power supply, GIGABYTE GV-N770OC-4GD GeForce
And you purchased a crappy 500w PSU, so my suggest is to return you cm500, and get this one Seasonic 650 Gold, Modular, Certified Haswell Ready
Ex Machin
(14 items)
 
  
CPUMotherboardGraphicsRAM
intel i7 3770k Intel Desktop Board DZ77GA-70K MSI R9 380 4GB G.Skills ripjaws 8gb 
Hard DriveOptical DriveCoolingOS
2x Velociraptor 500mb raid 0 Lg blu ray 12x Zalman CNPS9500 at 2 ball cpu Windows 8 64 bits 
MonitorKeyboardPowerCase
Lg 23EA63V-P IPS cInema Microsoft SideWinder X4 EVGA SuperNova 650 80 gold modular CM Storm Enforcer 
MouseAudio
Razer DeathAdder 2013 Creative SB Recon3D 
  hide details  
Reply
Ex Machin
(14 items)
 
  
CPUMotherboardGraphicsRAM
intel i7 3770k Intel Desktop Board DZ77GA-70K MSI R9 380 4GB G.Skills ripjaws 8gb 
Hard DriveOptical DriveCoolingOS
2x Velociraptor 500mb raid 0 Lg blu ray 12x Zalman CNPS9500 at 2 ball cpu Windows 8 64 bits 
MonitorKeyboardPowerCase
Lg 23EA63V-P IPS cInema Microsoft SideWinder X4 EVGA SuperNova 650 80 gold modular CM Storm Enforcer 
MouseAudio
Razer DeathAdder 2013 Creative SB Recon3D 
  hide details  
Reply
post #13 of 18
Quote:
Originally Posted by LatinLover View Post

Op, that graphic card need a least 600w power supply, GIGABYTE GV-N770OC-4GD GeForce
And you purchased a crappy 500w PSU, so my suggest is to return you cm500, and get this one Seasonic 650 Gold, Modular, Certified Haswell Ready

To test this, you could remove the graphics card (or just the power to is (1x 6pin, 1x 8pin), move your monitor cable to the video plugs on the motherboard, and use the on-board graphics. If you still get BSODs, then it's not the source of the issues.
SR2 PWNS J00
(22 items)
 
SL4V3
(16 items)
 
 
CPUMotherboardGraphicsRAM
2x intel Xeon X5650 @ 4Ghz Evga SR-2 SLi Evga GTX480s 18GB G.SKill Pi 1600 DDR3 
Hard DriveHard DriveHard DriveOptical Drive
60GB Vertex 3 2TB Western Digital Black 2TB External HDD (USB 2) 22x Sata Bluray/DVD Multi Drive 
CoolingCoolingCoolingCooling
Hardware Labs GTX 360 Radiator EK Supreme HF Copper Danger Den GTX480 Waterblock All Copper Natemandoo SR-2 Solid Copper Waterblock 
CoolingCoolingOSMonitor
Iwaki RD-30 D5 with DCThermo Top Windows 7 Ultimate 3x 24" LG LCDs (16:9) 
KeyboardPowerCaseMouse
Ducky Shine MX-Cherry Black Mechanical Keyboard... 1500W Silver stone Strider Mountain Mods Extended Ascension Horizon Razer Mamba 2012 (wired) 
Mouse PadAudio
Razer XactMat Asus Xonar SXT 
CPUMotherboardGraphicsRAM
intel Q6600 ASUS P5K-E Wifi AMD HD Radeon 6990 4GBs G.skill HZs 
Hard DriveOptical DriveCoolingOS
OCZ vertex 2 LG 22x combo drive Cooler Master hyper 212+ Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
LG FLATRON L1933TR LG FLATRON L1933TR Logitech G15 rev. 1 Silverstone Decathlon 750W modular PSU 
CaseMouseMouse PadAudio
Thermaltake Armor with 250mm side fan Logitech 2000dpi USB mouse Steel series QcK+ Auzentech X-Fi prelude 
  hide details  
Reply
SR2 PWNS J00
(22 items)
 
SL4V3
(16 items)
 
 
CPUMotherboardGraphicsRAM
2x intel Xeon X5650 @ 4Ghz Evga SR-2 SLi Evga GTX480s 18GB G.SKill Pi 1600 DDR3 
Hard DriveHard DriveHard DriveOptical Drive
60GB Vertex 3 2TB Western Digital Black 2TB External HDD (USB 2) 22x Sata Bluray/DVD Multi Drive 
CoolingCoolingCoolingCooling
Hardware Labs GTX 360 Radiator EK Supreme HF Copper Danger Den GTX480 Waterblock All Copper Natemandoo SR-2 Solid Copper Waterblock 
CoolingCoolingOSMonitor
Iwaki RD-30 D5 with DCThermo Top Windows 7 Ultimate 3x 24" LG LCDs (16:9) 
KeyboardPowerCaseMouse
Ducky Shine MX-Cherry Black Mechanical Keyboard... 1500W Silver stone Strider Mountain Mods Extended Ascension Horizon Razer Mamba 2012 (wired) 
Mouse PadAudio
Razer XactMat Asus Xonar SXT 
CPUMotherboardGraphicsRAM
intel Q6600 ASUS P5K-E Wifi AMD HD Radeon 6990 4GBs G.skill HZs 
Hard DriveOptical DriveCoolingOS
OCZ vertex 2 LG 22x combo drive Cooler Master hyper 212+ Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
LG FLATRON L1933TR LG FLATRON L1933TR Logitech G15 rev. 1 Silverstone Decathlon 750W modular PSU 
CaseMouseMouse PadAudio
Thermaltake Armor with 250mm side fan Logitech 2000dpi USB mouse Steel series QcK+ Auzentech X-Fi prelude 
  hide details  
Reply
post #14 of 18
Thread Starter 
Quote:
Originally Posted by H3||scr3am View Post

To test this, you could remove the graphics card (or just the power to is (1x 6pin, 1x 8pin), move your monitor cable to the video plugs on the motherboard, and use the on-board graphics. If you still get BSODs, then it's not the source of the issues.

I still get BSOD without the graphics card in. I am going to try ram voltage but don't even know how much I am supposed to set it at.
post #15 of 18
that psu seems a little short of the ummff that rig may need, but im not sure thats your current issue. my guess is the ram quad channel on a dual channel chipset. i would remove all but one ram stick....


edit: seems its been stated but ram is the most viable answer, start with one, if you get the same issue, remove it and try another to verify.

i would also remove all unnecessary peripherals. disk drive, and any usb devices apart from mouse and keyboard. i have had issues with creative and asus devices that led to instant bsods due to outdated firmware.

edit: same goes for using multiple HDDs and SSDs, unplug those that dont contain the OS, and maybe your wifi/ethernet connections

basically strip the computer down to the bare minimum to boot and operation inside the OS

ram voltage for your mem is 1.5v, IMO this is not a common mem issue but you most certainly dont have a common issue.

another good idea (while your elbow deep in a new chunk of income) is to visually inspect every single thing you can to the best of your ability to see if there loose heatsinks, cracks, chips or any other damage on any of your components

and the most common of issues on new rigs use anti static equipment

Mod edit: Please use the edit instead of multi posting.
    
CPUMotherboardGraphicsRAM
I5 2500K 4.7ghz 1.36v MSI Z68A-GD80 (G3) MSI GTX 680 TFIII 4GB SLI 1248mhz core 6.5ghz mem 16GB Patriot Viper X Div 2 
Hard DriveOptical DriveOSMonitor
2xM4 64 GB Raid 0 4x5900rpm Baracuda Raid 0 Pioneer BDR Windows 7 Home Premium Triple Asus 27" monitors 
KeyboardPowerCaseMouse
Tt Challenger Ultimate Corsair AX-1200 NZXT Switch 810 Mionix Naos 5000 
Mouse Pad
Mionix Propus 380 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
I5 2500K 4.7ghz 1.36v MSI Z68A-GD80 (G3) MSI GTX 680 TFIII 4GB SLI 1248mhz core 6.5ghz mem 16GB Patriot Viper X Div 2 
Hard DriveOptical DriveOSMonitor
2xM4 64 GB Raid 0 4x5900rpm Baracuda Raid 0 Pioneer BDR Windows 7 Home Premium Triple Asus 27" monitors 
KeyboardPowerCaseMouse
Tt Challenger Ultimate Corsair AX-1200 NZXT Switch 810 Mionix Naos 5000 
Mouse Pad
Mionix Propus 380 
  hide details  
Reply
post #16 of 18
BSOD could be anything. Could be bad drivers, could be bad hardware, your guess is as good as anybody's with such little diagnostic details provided.

Steps that you need to take, ranked most important to least:

1. Pull all the memory out of the system except for one module. Ideally, run MEMTEST86+ from a USB memory stick for a few complete passes. This will verify that you at least have a good working memory module, that the CPU memory controller is working properly, and that the voltages/timings of the RAM are OK.

2. Start over with the Windows installation. It sounds like you installed Windows, installed drivers, then started getting problems. When the BSOD start - immediately after installing certain drivers? Re-install this time without the drivers, and DOWNLOAD the latest drivers from the motherboard manufacturer. Don't rely on the ones that come on the CD-ROM, often these aren't updated and might have been pulled off the shelf at the factory from a stack that was a year old.

The CX500 isn't a fabulous power supply, but it's plenty to run the GTX 760 and a non-overclocked CPU/GPU. The TDP of the card is less than 250W, and that leaves 250W to run the rest of the system. PLENTY of power capacity there.

If you can't get it resolved with these basic steps, you might have bad hardware, or you MIGHT have damaged something during installation, or suffered ESD damage. Seek out an experienced builder to assist you.

Greg

What geographical region do you live in? If you're close to Maryland/Pennsylvania, I might be able to assist you.
post #17 of 18
is the blue screens during the install of windows or are after? because if its after i would think that it is a driver related issue or virus rather then a ram issue also are the blue screens random or are they all the same one over and over
Edited by ozlay - 8/16/13 at 11:46pm
Red Queen
(12 items)
 
lenovo T60
(6 items)
 
 
CPUMotherboardGraphicsRAM
intel core 2 due mobile t7600 lenovo 1935dau intel 945 express kingston ddr2 pc-5400 
Hard DriveOS
ocz agility2 windows 10 pro 64bit 
  hide details  
Reply
Red Queen
(12 items)
 
lenovo T60
(6 items)
 
 
CPUMotherboardGraphicsRAM
intel core 2 due mobile t7600 lenovo 1935dau intel 945 express kingston ddr2 pc-5400 
Hard DriveOS
ocz agility2 windows 10 pro 64bit 
  hide details  
Reply
post #18 of 18
Set the computer to not reboot after a BSOD. You do that by right clicking on My Computer. Click on properties then in the upper left corner of the screen click on Advanced System settings. Under Settings and Recovery click on the settings button. Under system failure remove the check mark from Automatically restart. Click OK then OK again and close the screen and reboot. Now the next time you get a BSOD write down the error code and error message. The code should start with 0x and then more numbers Once we have an error code and message it will be easier to sort out the problem.
    
CPUMotherboardGraphicsRAM
I7-3770k  MSI Z77A-GD65 7970 GSkill Ripjaws 
Hard DriveOptical DriveCoolingOS
OCZ Agility2  LG USB External CD/DVD Burner CoolMaster Hyper 212+  Win7 Pro 64  
MonitorKeyboardPowerCase
Acer 19" Microsoft wireless  CoolerMaster 850watt Sentey Burton GS-6500  
MouseOtherOther
Microsoft wireless CyberPower 800w UPS 8-Port USB/PS2 Combo KVM Switch 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
I7-3770k  MSI Z77A-GD65 7970 GSkill Ripjaws 
Hard DriveOptical DriveCoolingOS
OCZ Agility2  LG USB External CD/DVD Burner CoolMaster Hyper 212+  Win7 Pro 64  
MonitorKeyboardPowerCase
Acer 19" Microsoft wireless  CoolerMaster 850watt Sentey Burton GS-6500  
MouseOtherOther
Microsoft wireless CyberPower 800w UPS 8-Port USB/PS2 Combo KVM Switch 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Crash Analysis and Debugging
Overclock.net › Forums › Software, Programming and Coding › Operating Systems › Windows › Crash Analysis and Debugging › Nonstop blue screens. Need help!