So yesterday, I decided to go for overclocking my chip again after it hadn't been OCed in about a month. I initially bought a 4770k, had it sent back cause it was a bad OCer, got a new one that seemed to be a tiny bit better, but I decided to just stick with the typical 1.25v 4.4 GHz OC. It was 100% stable 12 hours testing, only difference is I left Cache Voltage on auto and same with unclock multiplier. So yesterday I decided to start, put Vcore to 1.25v, Cache at 1.2v and Unclock at 34. I booted just fine, but immediately blue screen when I start a stress test. This has never happened to me, I put the Input at 1.85v to see if it helped (from auto) and no luck. Any ideas?
post #1 of 4
8/22/13 at 7:55am