Overclock.net › Forums › Components › Power Supplies › 24 and 8 pin part help
New Posts  All Forums:Forum Nav:

24 and 8 pin part help

post #1 of 4
Thread Starter 
Hey all I have an MSI Z77 M-ITX motherboard and the 8 pin input is right next to the PCI E lane and to plug it in i either have to go all the way up over my GPU or under it and this bends the cables a bit more than I would like. So my plan was to find a 90 degree adapter or new connector and was told you could get them on Mouser or Newark but when I go through those sites it's not as simple as choosing 24 pin it has lots of other technical specs and was wondering if any electrical engineer or knowledgeable soul could help.



**************Long story short I need help finding an 8 pin and 24 pin connectors on Mouser or Newark*******************


Thanks in advance
post #2 of 4
just look here:
http://www.newegg.com/Internal-Power-Cables/SubCategory/ID-2820?Tid=16764

24 pin extensions are easy just make sure when you get an 8 pin extension is that it is ATX and not PCI. if you want to know the difference take a look here:
http://www.playtool.com/pages/psuconnectors/connectors.html
loon 3.2
(18 items)
 
  
CPUMotherboardGraphicsRAM
i7-3770K Asus P8Z77-V Pro EVGA 980TI SC+ 16Gb PNY ddr3 1866 
Hard DriveHard DriveHard DriveOptical Drive
PNY 1311 240Gb 1 TB Seagate 3 TB WD Blue DVD DVDRW+/- 
CoolingCoolingOSMonitor
EKWB P280 kit EK-VGA supremacy Win X LG 24MC57HQ-P 
KeyboardPowerCaseMouse
Ducky Zero [blues] EVGA SuperNova 750 G2 Stryker M [hammered and drilled] corsair M65 
AudioAudio
SB Recon3D Klipsch ProMedia 2.1  
  hide details  
Reply
loon 3.2
(18 items)
 
  
CPUMotherboardGraphicsRAM
i7-3770K Asus P8Z77-V Pro EVGA 980TI SC+ 16Gb PNY ddr3 1866 
Hard DriveHard DriveHard DriveOptical Drive
PNY 1311 240Gb 1 TB Seagate 3 TB WD Blue DVD DVDRW+/- 
CoolingCoolingOSMonitor
EKWB P280 kit EK-VGA supremacy Win X LG 24MC57HQ-P 
KeyboardPowerCaseMouse
Ducky Zero [blues] EVGA SuperNova 750 G2 Stryker M [hammered and drilled] corsair M65 
AudioAudio
SB Recon3D Klipsch ProMedia 2.1  
  hide details  
Reply
post #3 of 4
Thread Starter 
Thanks loon what I was hoping for is a 90 degree adapter or whole new connector for those two but they may not make those.
post #4 of 4
sorry i have my doubts for such an angled adapter, at least i have never seen one in 20 years.
loon 3.2
(18 items)
 
  
CPUMotherboardGraphicsRAM
i7-3770K Asus P8Z77-V Pro EVGA 980TI SC+ 16Gb PNY ddr3 1866 
Hard DriveHard DriveHard DriveOptical Drive
PNY 1311 240Gb 1 TB Seagate 3 TB WD Blue DVD DVDRW+/- 
CoolingCoolingOSMonitor
EKWB P280 kit EK-VGA supremacy Win X LG 24MC57HQ-P 
KeyboardPowerCaseMouse
Ducky Zero [blues] EVGA SuperNova 750 G2 Stryker M [hammered and drilled] corsair M65 
AudioAudio
SB Recon3D Klipsch ProMedia 2.1  
  hide details  
Reply
loon 3.2
(18 items)
 
  
CPUMotherboardGraphicsRAM
i7-3770K Asus P8Z77-V Pro EVGA 980TI SC+ 16Gb PNY ddr3 1866 
Hard DriveHard DriveHard DriveOptical Drive
PNY 1311 240Gb 1 TB Seagate 3 TB WD Blue DVD DVDRW+/- 
CoolingCoolingOSMonitor
EKWB P280 kit EK-VGA supremacy Win X LG 24MC57HQ-P 
KeyboardPowerCaseMouse
Ducky Zero [blues] EVGA SuperNova 750 G2 Stryker M [hammered and drilled] corsair M65 
AudioAudio
SB Recon3D Klipsch ProMedia 2.1  
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Power Supplies
Overclock.net › Forums › Components › Power Supplies › 24 and 8 pin part help