Originally Posted by DesktopDoctorNZ
All im saying is you might need something bigger than a dremel, i used a jigsaw cuz the metal is so bloody thick... done in about 5 minutes. I used the GTS 360 but bloody hell there was no room at all. I had to force everything in there for it to fit. I would recommend going for fans smaller than 25mm but test it out and see if it fits with your system, also think about your cpu power cable and how that will route. That was one problem i had with mine...
The cutting was one reason I am skeptical about it, also I don't have a jigsaw but could probably find one if in need. I reckon my cpu power cables could be pushed down a bit, they are already routed through a hole I cut up there, but looking at yours they look as if they are about to get sucked into the fans lol, very tight squeeze. Typhoons only come in 25mm unfortunately, along with most other good fans. I'll have to decide soon on this rad issue as techworld is getting an alphacool order this week and if I want a 240 I have to be quick.
Also, something I found trying to avoid as much shipping from the U.S as possible is these:
two possible pumps that cost less by my calculations than shipping an MCP655. Only thing was I wanted to go for the threaded MCP on performancepcs to avoid the 1/2 barb issue, it's either that or I could buy the alphacool pump from techworld and use a top instead.