Overclock.net › Forums › Components › Hard Drives & Storage › RAID Controllers and Software › Not seeing the results I expected.
New Posts  All Forums:Forum Nav:

Not seeing the results I expected.

post #1 of 4
Thread Starter 
I recently set up a Raid 0 array using two WD Caviar Black 1TB through my BIOS (Asus P8H67-M PRO/CSM). However, I am not seeing the speeds I expected.

Here are the results for the Raid array:




I don't have any recorded speed tests for the drives alone, and I don't want to recreate my raid array as of right now. However, Western Digital's specification sheet places the maximum transfer rate at 126 mb/s and I used to get about 110-115mb/s. http://www.wdc.com/global/products/specs/?driveID=792&language=1

I know I wouldn't be getting exactly 252 mb/s, but it shouldn't be this low. Any ideas on what could be causing it?

Thanks in advance.
post #2 of 4
What kind of stripe size?
post #3 of 4
Thread Starter 
Quote:
Originally Posted by beers View Post

What kind of stripe size?

128 KB.
post #4 of 4
Thread Starter 
Bump.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: RAID Controllers and Software
Overclock.net › Forums › Components › Hard Drives & Storage › RAID Controllers and Software › Not seeing the results I expected.