Originally Posted by ozlay
well that seem to show all cores which is good 47c is kinda high for the hyper 212 have you tried installing a second fan on it? them temps are fine but i would think you would get lower temps then that idk but i wouldnt be worried about it as long as your temps dont go above 71c which the max amd recommends is 71.3°C which you havent reached yet so you will be fine if you want to get better temps you will have to upgrade your cooler or add a second fan if you havent already
I'ce change the Evo with the Cool Master Geminii s524, because with the EVO I cannot close my case. I've made a custom panel made from thin massonite, and with the Gemini I have 3c less... The heatsink that touch the cpu is a complete block, with the Artic 5 paste, I have temp between 44-47c....
Fan I have: 129mm inside the power supply to suck the air inside to the little 80mm outside, a 120mm in the heatsink, and the fan is very close to the ventillation hole in the panel, so the air is take from outside and always fresh, a 80mm fan in the front of the case and another 80mm at the back to suck out the air.
So i think I have a good airflow with cool air. I've check the temp, and now I've close the software to not get crazy with the temp of my cpu. I know I have good ventillation, my cpu run stock speed, no OC and 4 extras fan to push and pull air in right direction to get a good airflow.