Originally Posted by Imprezzion
My new Lightning just came in. Well, new, month old secondhand one.
But i am a sad panda now. It's got Elpida.. and afaik that's baaaaaaaad news.
Good news is, the core is doing very good.
I'm using the skyn3t LN2 BIOS (rev3 as it's for elpida
Running +100mV (1.200v load? I was expecting more..) and 110% power limit.
Core is now testing at 1333Mhz and seems fine so far in Valley which is my initial testing program. I am pushing a extra 13Mhz every 10 minutes of loop till it either artifacts or crashes.
Then i'll test 1 or 2 steps of 13Mhz lower in other tests to see if it stabilizes.
So far still no sign of artifacts on 1333Mhz even on just 1.20v load.
EDIT: Ok, 1346Mhz artifacts in Valley and 1333 artifacts in 3dMark Fire Strike.
1320Mhz so far seems to be working.
As for Aux, what use does it have?
EDIT2: Ok, it's worse then I thought.. These Elpida chips will not do +200 no matter what voltage i slam into them. +100 orso is the max I can get on like, 1.70v.. 1.60v I can barely make it to +80 without artifacting...