Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Led's in SysFan 3
New Posts  All Forums:Forum Nav:

Led's in SysFan 3

post #1 of 4
Thread Starter 
Hello,
I have MSI z77-g43 MoBo. I installed Leds and instead putting them throw PSU i put them in Sys Fan port on the mobo, i thought i could control the Brightness of leds by decreasing or increasing the fan speed in present , but in BIOS i dodnt see SysFan 3 ,

Is any way i can control them ?
post #2 of 4
unless they have a pwm header, or you are using them off a controller probably not. would be cool though.

what about a different header?
Gaming Rig
(17 items)
 
File Server
(13 items)
 
 
CPUMotherboardGraphicsGraphics
Core i7 4790K ASUS Z97-WS Gigabyte GeForce GTX 980 Gigabyte GeForce GTX 980 
RAMHard DriveHard DriveCooling
16 Gb's Mushkin DDR3 @ 1600 MHz Crucial M500 SSD 240gb 4 Seagate Cheetah 15.7 15k rpm 300Gb Drives in... Coolit ECO C240 
OSMonitorMonitorPower
Windows 7 Ultimate ASUS PB287Q 4K Monitor HTC Vive Coolermaster Silent Pro M 1000W 
CaseMouseMouse PadAudio
Rosewill Blackhawk Ultra Razer Deathadder 2013 Steelseries Qck Mass Super Thick Cloth Mouse Pad Genius SW-G2.1 1250 4PC Gaming Speakers 
Other
Dell PERC H310 
CPUMotherboardRAMHard Drive
Core i3 2120 Supermicro X9SCM-F 4 Gb Kingston 1600mhz DDR3 ECC 12 Segate 2tb drives (RAID 6) 
Hard DriveHard DriveOSPower
ADATA SP600 SSD 24 Toshiba DT01ACA200 drives (2 RAID 6's) Windows 7 Ultimate 64 bit. OCZ ZT750 Supermicro PWS-665-PQ 
CaseOtherOtherOther
Norco 4020 and Norco 4224 LSI 9260-4i Raid Card Intel RES2SV240 20 port Expander. HP SAS 24 por... Voltaire 410Ex Hca Infiniband HBA 
  hide details  
Reply
Gaming Rig
(17 items)
 
File Server
(13 items)
 
 
CPUMotherboardGraphicsGraphics
Core i7 4790K ASUS Z97-WS Gigabyte GeForce GTX 980 Gigabyte GeForce GTX 980 
RAMHard DriveHard DriveCooling
16 Gb's Mushkin DDR3 @ 1600 MHz Crucial M500 SSD 240gb 4 Seagate Cheetah 15.7 15k rpm 300Gb Drives in... Coolit ECO C240 
OSMonitorMonitorPower
Windows 7 Ultimate ASUS PB287Q 4K Monitor HTC Vive Coolermaster Silent Pro M 1000W 
CaseMouseMouse PadAudio
Rosewill Blackhawk Ultra Razer Deathadder 2013 Steelseries Qck Mass Super Thick Cloth Mouse Pad Genius SW-G2.1 1250 4PC Gaming Speakers 
Other
Dell PERC H310 
CPUMotherboardRAMHard Drive
Core i3 2120 Supermicro X9SCM-F 4 Gb Kingston 1600mhz DDR3 ECC 12 Segate 2tb drives (RAID 6) 
Hard DriveHard DriveOSPower
ADATA SP600 SSD 24 Toshiba DT01ACA200 drives (2 RAID 6's) Windows 7 Ultimate 64 bit. OCZ ZT750 Supermicro PWS-665-PQ 
CaseOtherOtherOther
Norco 4020 and Norco 4224 LSI 9260-4i Raid Card Intel RES2SV240 20 port Expander. HP SAS 24 por... Voltaire 410Ex Hca Infiniband HBA 
  hide details  
Reply
post #3 of 4
Thread Starter 
I am sorry but i am only 1 year in canada and i dont anderstand what you mean "header"
post #4 of 4
The port you referred to on the motherboard is a header. Generally headers are male connections available on the mother board (meaning they have the pins that insert into a connector). What I would suggest is like he said getting a PWM header (connector) so that it potentially shows up as a fan OR you can do as I and many others have and install something to manually dim the lights. I added a cheap DC voltage dimmer, 7-12V range, and ran my power into one side and the light connections (+ and -) into the other side and have a dimmer switch that I can use to manually adjust the brightness. This is just a suggestion since I'm not sure how well you can control, if at all, lights with the motherboard PWM fan header.

Curious note, is the header (or port) a 3-pin or 4-pin header. If it is 3-pin then you won't be able to control it. It will just be full power all the time.
Dark Space
(18 items)
 
  
Reply
Dark Space
(18 items)
 
  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Mods
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Led's in SysFan 3