Overclock.net › Forums › AMD › AMD Motherboards › AMD BIOS › need help tightening my memory timing on an amd board with an AMI bios
New Posts  All Forums:Forum Nav:

need help tightening my memory timing on an amd board with an AMI bios

post #1 of 9
Thread Starter 
hello im having prtoblems adjusting my memory timing in my bios heres my memory info from cpuz

Chipset

Northbridge ATI Xpress 3200 (RD580) rev. 00
Southbridge ATI SB600 rev. 00
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR2
Memory Size 4 GBytes
Channels Dual, (Unganged)
Memory Frequency 334.1 MHz (3:5)
CAS# latency (CL) 5.0
RAS# to CAS# delay (tRCD) 5
RAS# Precharge (tRP) 5
Cycle Time (tRAS) 15
Bank Cycle Time (tRC) 21
Command Rate (CR) 2T
Uncore Frequency 1804.1 MHz

Memory SPD

DIMM # 1
SMBus address 0x50
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) Corsair (7F7F9E0000000000)
Size 1024 MBytes
Max bandwidth PC2-6400 (400 MHz)
Part number CM2X1024-6400C4
Number of banks 1
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP yes (1 profiles)
XMP no
AMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 4.0-4-4-13-15 @ 270 MHz
JEDEC #2 5.0-5-5-18-22 @ 400 MHz
EPP timings table CL-tRCD-tRP-tRAS-tRC-CR @ frequency (voltage)
EPP profile #1 (full) 4.0-4-4-12-102-2T @ 400 MHz (2.100 Volts)

DIMM # 2
SMBus address 0x51
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) Corsair (7F7F9E0000000000)
Size 1024 MBytes
Max bandwidth PC2-6400 (400 MHz)
Part number CM2X1024-6400C4
Number of banks 1
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP yes (1 profiles)
XMP no
AMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 4.0-4-4-13-15 @ 270 MHz
JEDEC #2 5.0-5-5-18-22 @ 400 MHz
EPP timings table CL-tRCD-tRP-tRAS-tRC-CR @ frequency (voltage)
EPP profile #1 (full) 4.0-4-4-12-102-2T @ 400 MHz (2.100 Volts)

DIMM # 3
SMBus address 0x52
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) STT (7F7F7F7F7F7F3400)
Size 1024 MBytes
Max bandwidth PC2-6400 (400 MHz)
Part number SUPERTALENT02
Number of banks 1
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP no
XMP no
AMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 4.0-4-4-12-16 @ 266 MHz
JEDEC #2 5.0-5-5-15-20 @ 333 MHz
JEDEC #3 6.0-6-6-18-24 @ 400 MHz

DIMM # 4
SMBus address 0x53
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) STT (7F7F7F7F7F7F3400)
Size 1024 MBytes
Max bandwidth PC2-6400 (400 MHz)
Part number SUPERTALENT02
Number of banks 1
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP no
XMP no
AMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 4.0-4-4-12-16 @ 266 MHz
JEDEC #2 5.0-5-5-15-20 @ 333 MHz
JEDEC #3 6.0-6-6-18-24 @ 400 MHz

can some one please help me get my memory tighter thanks
post #2 of 9
Just put in these timings and volts


EPP profile #1 (full) 4.0-4-4-12-102-2T @ 400 MHz (2.100 Volts)
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
FX6300 Black M5A99X EVO R2.0 Nvidia GTS450 Team Vulcan PC3 12800 
Hard DriveOptical DriveCoolingOS
Samsung 840 PRO Asus DRW-1608P (x2) Custom Water Cooling Win7 (Ult), Win 8.1 & Win Server 2012 R2 
MonitorKeyboardPowerCase
2 X Samsung 915N Ducky Shine III, Blue Cherry/Blue LEDs PCP&C 1kw Lian Li PC-71 (W/Window) 
MouseAudio
Logiteck G400s none 
  hide details  
Reply
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
FX6300 Black M5A99X EVO R2.0 Nvidia GTS450 Team Vulcan PC3 12800 
Hard DriveOptical DriveCoolingOS
Samsung 840 PRO Asus DRW-1608P (x2) Custom Water Cooling Win7 (Ult), Win 8.1 & Win Server 2012 R2 
MonitorKeyboardPowerCase
2 X Samsung 915N Ducky Shine III, Blue Cherry/Blue LEDs PCP&C 1kw Lian Li PC-71 (W/Window) 
MouseAudio
Logiteck G400s none 
  hide details  
Reply
post #3 of 9
Thread Starter 
what do i do if im unable to change my volts also where in my ami bios to i change the timings
post #4 of 9
Thread Starter 
what do i do if im unable to change my volts also where in my ami bios to i change the timings
post #5 of 9
Thread Starter 
i have no idea what settings to change in the bios heres 2 pictures of my ram timings page in the ami bios



please tell me what settings to change thanks
Edited by kaitlin4599 - 9/1/13 at 2:13pm
post #6 of 9
Quote:
Originally Posted by kaitlin4599 View Post

please tell me what settings to change thanks

That's not going to happen.

Firstly. why do you think you need to make changes?

Secondly, Just plugging random numbers in to a BIOS, without knowing what they do, is a sure way to really screw up your computer. To say nothing about loosing all your data and programs too.

Thirdly: Educate yourself a little. Read some of the overclocking stickies here on this forum and others. Google what you don't understand in them.

When you understand how a computer works, and especially how memory works, then it's time to start messing around with settings.

While this forum is a place for people to get help, I just don't think giving you a "cook book" answer is going to help you in the long run, others may disagree though. So, if you get some numbers, be forewarned!
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
FX6300 Black M5A99X EVO R2.0 Nvidia GTS450 Team Vulcan PC3 12800 
Hard DriveOptical DriveCoolingOS
Samsung 840 PRO Asus DRW-1608P (x2) Custom Water Cooling Win7 (Ult), Win 8.1 & Win Server 2012 R2 
MonitorKeyboardPowerCase
2 X Samsung 915N Ducky Shine III, Blue Cherry/Blue LEDs PCP&C 1kw Lian Li PC-71 (W/Window) 
MouseAudio
Logiteck G400s none 
  hide details  
Reply
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
FX6300 Black M5A99X EVO R2.0 Nvidia GTS450 Team Vulcan PC3 12800 
Hard DriveOptical DriveCoolingOS
Samsung 840 PRO Asus DRW-1608P (x2) Custom Water Cooling Win7 (Ult), Win 8.1 & Win Server 2012 R2 
MonitorKeyboardPowerCase
2 X Samsung 915N Ducky Shine III, Blue Cherry/Blue LEDs PCP&C 1kw Lian Li PC-71 (W/Window) 
MouseAudio
Logiteck G400s none 
  hide details  
Reply
post #7 of 9
Thread Starter 
i had tighter memory timings before my new processor upgrade and my games ran much smoother and faster but when i put in the new processor after updating the bios to support said new cpu i had to rever to factory settings and lost my timinga
post #8 of 9
Thread Starter 
i had tighter memory timings before my new processor upgrade and my games ran much smoother and faster but when i put in the new processor after updating the bios to support said new cpu i had to rever to factory settings and lost my timinga
post #9 of 9
Thirdly: Educate yourself a little. Read some of the overclocking stickies here on this forum and others. Google what you don't understand in them.

When you understand how a computer works, and especially how memory works, then it's time to start messing around with settings.


Your problem really isn't very hard to solve.
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
FX6300 Black M5A99X EVO R2.0 Nvidia GTS450 Team Vulcan PC3 12800 
Hard DriveOptical DriveCoolingOS
Samsung 840 PRO Asus DRW-1608P (x2) Custom Water Cooling Win7 (Ult), Win 8.1 & Win Server 2012 R2 
MonitorKeyboardPowerCase
2 X Samsung 915N Ducky Shine III, Blue Cherry/Blue LEDs PCP&C 1kw Lian Li PC-71 (W/Window) 
MouseAudio
Logiteck G400s none 
  hide details  
Reply
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
FX6300 Black M5A99X EVO R2.0 Nvidia GTS450 Team Vulcan PC3 12800 
Hard DriveOptical DriveCoolingOS
Samsung 840 PRO Asus DRW-1608P (x2) Custom Water Cooling Win7 (Ult), Win 8.1 & Win Server 2012 R2 
MonitorKeyboardPowerCase
2 X Samsung 915N Ducky Shine III, Blue Cherry/Blue LEDs PCP&C 1kw Lian Li PC-71 (W/Window) 
MouseAudio
Logiteck G400s none 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD BIOS
Overclock.net › Forums › AMD › AMD Motherboards › AMD BIOS › need help tightening my memory timing on an amd board with an AMI bios