Overclock.net › Forums › Intel › Intel CPUs › Back to Square One :-(
New Posts  All Forums:Forum Nav:

Back to Square One :-(

post #1 of 5
Thread Starter 
:-( I just updated my bios and set up my overclocked settings which were stable at one point. Now when i try to run my computer on overclock it just reboots. No BSOD nothing just completely reboots. I set my multiplier back to auto and my core voltage back to auto so I can actually use my computer. Any ideas what's going on here? I have an asus z87-k mobo with at i7-4770k cpu.
post #2 of 5
Y u no keep documentation of settings?
post #3 of 5
Try to clear cmos, check your manual for this.
post #4 of 5
Thread Starter 
I'm testing now. Some random things I stumbled upon. But there are some settings in the uefi that may have turned on that prevented higher than stock voltages. I disabled them and now I'm back to over clocked settings with low temps. Doing an intel burn test at the moment and running stable. Fingers crossed
post #5 of 5
Thread Starter 
Now I have this issue where even if I'm on adaptive mode the voltage stays static at turbo and the clock speed of my CPU stays static at 4.4 on cpuz
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Back to Square One :-(