Overclock.net › Forums › Industry News › Hardware News › [AquaComputer] Aquaero 6
New Posts  All Forums:Forum Nav:

[AquaComputer] Aquaero 6 - Page 145  

post #1441 of 1963
Understood
    
CPUMotherboardGraphicsRAM
Intel Core i7 3930K Big Bang-XPower II (MS-7737) ASUS HD7970 Series Corsair  
Hard DriveHard DriveOptical DriveCooling
Seagate Barracuda OCZ Agility 4  LG DVD burner Antec Kuhler H20 920 
OSCaseOther
Microsoft Windows 7 Pro 64 bit Cooler Master HAF-X recon fan controller 
  hide details  
    
CPUMotherboardGraphicsRAM
Intel Core i7 3930K Big Bang-XPower II (MS-7737) ASUS HD7970 Series Corsair  
Hard DriveHard DriveOptical DriveCooling
Seagate Barracuda OCZ Agility 4  LG DVD burner Antec Kuhler H20 920 
OSCaseOther
Microsoft Windows 7 Pro 64 bit Cooler Master HAF-X recon fan controller 
  hide details  

Gear mentioned in this thread:

post #1442 of 1963
For anyone else who is looking to do what sinatra is doing, you use this adapter. Then you remove the yellow wire from just one fan (the rpm sense wire, pin 3) and insert it into the unused slot of the fan connector (pin 3 of the adaptor.)


Edited by SeeThruHead - 1/8/14 at 5:23am
NanoBench
(21 items)
 
STHTV
(8 items)
 
CPUMotherboardGraphicsRAM
2600k maximus iv gene Gtx 780 Classified G.Skill Trident X 
Hard DriveCoolingCoolingCooling
adata sx900 Watercool MO-RA3 420 bitspower tank Swiftech MCP35x2 
CoolingCoolingCoolingCooling
EK-Ram Monarch x4 Clean Ek MIV-Gene Fullboard EK 780 Classified VGA Cooler EK Supremacy Clean 
CoolingMonitorKeyboardPower
Aquaero 5 LT Crossover 1440p QuickFire Tenkeyless Seasonic x-750 
CaseMouseMouse PadAudio
Dimastech Nano g700 Mionix Propus 380 Onkyo HT-R290 
Other
MDPC Sleeve 
CPUMotherboardGraphicsRAM
2500k asrock z77e-itx gtx 650 ti boost gskill ripjaws x 
Hard DriveOSMonitorCase
adata sx900 256 antec khuler Sony Bravia silverstone sg05 
  hide details  
NanoBench
(21 items)
 
STHTV
(8 items)
 
CPUMotherboardGraphicsRAM
2600k maximus iv gene Gtx 780 Classified G.Skill Trident X 
Hard DriveCoolingCoolingCooling
adata sx900 Watercool MO-RA3 420 bitspower tank Swiftech MCP35x2 
CoolingCoolingCoolingCooling
EK-Ram Monarch x4 Clean Ek MIV-Gene Fullboard EK 780 Classified VGA Cooler EK Supremacy Clean 
CoolingMonitorKeyboardPower
Aquaero 5 LT Crossover 1440p QuickFire Tenkeyless Seasonic x-750 
CaseMouseMouse PadAudio
Dimastech Nano g700 Mionix Propus 380 Onkyo HT-R290 
Other
MDPC Sleeve 
CPUMotherboardGraphicsRAM
2500k asrock z77e-itx gtx 650 ti boost gskill ripjaws x 
Hard DriveOSMonitorCase
adata sx900 256 antec khuler Sony Bravia silverstone sg05 
  hide details  
post #1443 of 1963
can we connect 2 x aquabus d5 pumps and 1 x aquabus flowsensor to aq 6?
BlackJack
(14 items)
 
  
CPUMotherboardGraphicsGraphics
5960x asus rampage V Asus strix 980 Asus strix 980 
RAMHard DriveHard DriveCooling
G.Skill 4x 4gb 3200mhz ocz vertex 4 128gb ocz vertex 4 128gb alphacool ut 60 480mm. 
CoolingCoolingCoolingCooling
alphacool ut 60 480mm alphacool ut 60 240mm 18x Alpenföhn WingsBoost 2  Aquaero 6xt 
PowerCase
Corsair ax 1500i Corsair 900d 
  hide details  
BlackJack
(14 items)
 
  
CPUMotherboardGraphicsGraphics
5960x asus rampage V Asus strix 980 Asus strix 980 
RAMHard DriveHard DriveCooling
G.Skill 4x 4gb 3200mhz ocz vertex 4 128gb ocz vertex 4 128gb alphacool ut 60 480mm. 
CoolingCoolingCoolingCooling
alphacool ut 60 480mm alphacool ut 60 240mm 18x Alpenföhn WingsBoost 2  Aquaero 6xt 
PowerCase
Corsair ax 1500i Corsair 900d 
  hide details  
post #1444 of 1963
Quote:
Originally Posted by ozzy1925 View Post

can we connect 2 x aquabus d5 pumps and 1 x aquabus flowsensor to aq 6?

Yes you can. Connect the D5s with an Aquacomputer splitter to the "high" connector and the flow sensor to the 1st PWM connector on the Aquaero 6. You should configure them in the Aquacomputer software via USB first, disconnect the PC from the wall and then connect them to the Aquaero 6 thumb.gif
  
  
post #1445 of 1963
Does that also work for the aqua bus flow sensors?
NanoBench
(21 items)
 
STHTV
(8 items)
 
CPUMotherboardGraphicsRAM
2600k maximus iv gene Gtx 780 Classified G.Skill Trident X 
Hard DriveCoolingCoolingCooling
adata sx900 Watercool MO-RA3 420 bitspower tank Swiftech MCP35x2 
CoolingCoolingCoolingCooling
EK-Ram Monarch x4 Clean Ek MIV-Gene Fullboard EK 780 Classified VGA Cooler EK Supremacy Clean 
CoolingMonitorKeyboardPower
Aquaero 5 LT Crossover 1440p QuickFire Tenkeyless Seasonic x-750 
CaseMouseMouse PadAudio
Dimastech Nano g700 Mionix Propus 380 Onkyo HT-R290 
Other
MDPC Sleeve 
CPUMotherboardGraphicsRAM
2500k asrock z77e-itx gtx 650 ti boost gskill ripjaws x 
Hard DriveOSMonitorCase
adata sx900 256 antec khuler Sony Bravia silverstone sg05 
  hide details  
NanoBench
(21 items)
 
STHTV
(8 items)
 
CPUMotherboardGraphicsRAM
2600k maximus iv gene Gtx 780 Classified G.Skill Trident X 
Hard DriveCoolingCoolingCooling
adata sx900 Watercool MO-RA3 420 bitspower tank Swiftech MCP35x2 
CoolingCoolingCoolingCooling
EK-Ram Monarch x4 Clean Ek MIV-Gene Fullboard EK 780 Classified VGA Cooler EK Supremacy Clean 
CoolingMonitorKeyboardPower
Aquaero 5 LT Crossover 1440p QuickFire Tenkeyless Seasonic x-750 
CaseMouseMouse PadAudio
Dimastech Nano g700 Mionix Propus 380 Onkyo HT-R290 
Other
MDPC Sleeve 
CPUMotherboardGraphicsRAM
2500k asrock z77e-itx gtx 650 ti boost gskill ripjaws x 
Hard DriveOSMonitorCase
adata sx900 256 antec khuler Sony Bravia silverstone sg05 
  hide details  
post #1446 of 1963
Quote:
Originally Posted by SeeThruHead View Post

Does that also work for the aqua bus flow sensors?

Yes sir!
  
  
post #1447 of 1963
I am on the fence about purchasing the Aquero 6 mainly due to my lack of understanding the German Language and I am not real Techy Tech. This is pretty long and I appologise. Probably need to do more reading it gets pretty confusing. help would be greatly appreciated. really wish Aqua Computer would post the instaltion guide for down load in various language versions. The cost of interpretation can get pretty pricy.

Need to get the order correct the first time since everything has to be imported.

Off the subject from Aquaero but please help. Only used Distilled water and 2 Kill Koils. EK blocks and EVGA 580 Hydros. Bitspower fittings. Dual Loops.

My water cooling hardware is 4 years old basically consist of 2 x Black Ice SR-1 Rads and 2 x Swiftech pumps Uber 655s from PPC. Should I replace the pumps and rads because of age? The cooling loop has been taken apart 1 time per year for maintenance and replaced all the O rings, tubing and coolant. (Distilled Water).

Orderd a CaseLabs Case Magnum 8 _ 7 days ago.

Going to install at least 2 x 120.3 rads possibly another 120.2 or 120.3 rad. Have not decided yet on the third rad depend on a few things how it will fit in the case should not be an issue.

Need to clean up the new build. Planning on doing a single loop and using a Bits Power Mod top for 2 x D5 pumps.

Going to place a order with PPC and order fans, Mod Top, want to order the Aquaero Pro 6 and some other cooling hardware and coolant. Leave out the Kill Koils and use premix coolant.

Aquaero Pro 6 have read a lot of reviews cant get this thru my thick head. have to order new fans Looking at Nochtua fans or NB-PL-2

I want to monitor Flow rate and temperatures 1 before entering the Radiators and 1 after the Radiators is this the correct orientation for the temperature probes?

Flow rate sensors. How can I figure out the flow rate on the single loop prior to building the loop. You have to order the correct flow rate sensor for the system. Will this work on the Aquaroi Pro 6?

http://www.performance-pcs.com/catalog/index.php?main_page=product_info&manufacturers_id=218&products_id=36085

Planning on water cooling the Aquero Pro 6 do you use this block? I thought they were coming out with a new block for the Pro 6.

http://www.performance-pcs.com/catalog/index.php?main_page=product_info&manufacturers_id=218&products_id=30599

In order to connect the fans should I use a Swiftech PWM splitter need at least 2 maybe 3? This I do not understand. if the power goes to the splitter from the PSU. The PWM goes to the Aquaero Pro 6 from the channel 1 on the PWM splitter how can the Aquero Pro 6 control the fan speed? It cant since the power is coming from the PSU to the splitter. I need to hook up the PWM splitter to three channels on the the Aquaero Pro 6 my concern is burning up the Aquero Pro 6 from to much voltage or amps. = 17 fans on three channels.

http://www.performance-pcs.com/catalog/index.php?main_page=product_info&manufacturers_id=48&products_id=38706

I really like the Uber Pumps this is what I prefer to use. I would just run the RPM wire from the pump to one channel on the Aquero Pro 6? If I do it this way then I need one channel for each pump? From what I have read may be mistaken Swiftech does not recommend using a PWM on the pumps to slow down the pump RPM?

http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=59_201&products_id=30192


In order to run 2 x pumps on the Aquero Pro 6 both pumps needs to go to the same channel on the Aquaero Pro 6? Need to run the same RPM then if one pump quits working it will not indicate the pumps is not functioning? Again the power for the pumps has to be powerd by the Aquaero Pro 6.
post #1448 of 1963
Dude, this is a news thread. There's a water cooling subforum here for your questions, and the Aquacomputer forum also has an English section smile.gif

Nevertheless I'll try to help:
- No you don't need to replace rads or pumps because of age if they have been regularly maintained.
- You can measure temps at radiator in and out, but you'll find it's not a useful measurement. The interesting measurement is the difference between your ambient air temperature and either your coolant temperature (at any point in loop) or your CPU/GPU temps.
- I don't know about flow rate sensors.
- You don't need to water cool the Aquaero 6, you can ask PPCs if they will order the passive heatsink for you.
- The Aquaero 6 provides PWM signal via the fourth fan pin, not by modulating the voltage. So you need PWM enabled fans with 4 pins. If you have that, then the Aquaero only needs to send the PWM signal and receive the RPM pulse (pins 3 and 4); it does not need to provide the 12V/ground, so that can come directly from the PSU. The fans you mention NB-PL-2 are not PWM enabled, so the PWM signal will do nothing and they would be voltage controlled. In that case the Swiftech PWM splitter is not the solution, you should just use 3 pin splitters.
- The Über pumps do not appear to be PWM pumps, so you need two channels to read the RPMs independently. If you won't have enough channels, you might consider getting separate Power Adjust units for each pump. That gives you extra channels and they can be controlled by the AQ6 as well.
Lori Lemaris 023
(21 items)
 
Felicity Harmon
(23 items)
 
Moneypenny
(12 items)
 
  hide details  
Lori Lemaris 023
(21 items)
 
Felicity Harmon
(23 items)
 
Moneypenny
(12 items)
 
  hide details  
post #1449 of 1963
Quote:
Originally Posted by LCRava View Post

Yes you can. Connect the D5s with an Aquacomputer splitter to the "high" connector and the flow sensor to the 1st PWM connector on the Aquaero 6. You should configure them in the Aquacomputer software via USB first, disconnect the PC from the wall and then connect them to the Aquaero 6 thumb.gif
if i do that way am i able to control the pumps speed etc. with aq6 xt or just with the aquacomputer software?
BlackJack
(14 items)
 
  
CPUMotherboardGraphicsGraphics
5960x asus rampage V Asus strix 980 Asus strix 980 
RAMHard DriveHard DriveCooling
G.Skill 4x 4gb 3200mhz ocz vertex 4 128gb ocz vertex 4 128gb alphacool ut 60 480mm. 
CoolingCoolingCoolingCooling
alphacool ut 60 480mm alphacool ut 60 240mm 18x Alpenföhn WingsBoost 2  Aquaero 6xt 
PowerCase
Corsair ax 1500i Corsair 900d 
  hide details  
BlackJack
(14 items)
 
  
CPUMotherboardGraphicsGraphics
5960x asus rampage V Asus strix 980 Asus strix 980 
RAMHard DriveHard DriveCooling
G.Skill 4x 4gb 3200mhz ocz vertex 4 128gb ocz vertex 4 128gb alphacool ut 60 480mm. 
CoolingCoolingCoolingCooling
alphacool ut 60 480mm alphacool ut 60 240mm 18x Alpenföhn WingsBoost 2  Aquaero 6xt 
PowerCase
Corsair ax 1500i Corsair 900d 
  hide details  
post #1450 of 1963
Since the 6 has no standby plug, this is not compatible, correct?

https://www.dazmode.com/store/product/aquaero_power_connect_cable_24_pin_atx_standby_power_atx_break/
The Mullet
(14 items)
 
Fractal Design R4
(3 photos)
 
CPUMotherboardGraphicsRAM
Intel 3930k @ 5 GHz Asus P9x79 Pro Asus DC2 GTX 780 x3 SLI 64GB G.Skill Ripjaws-Z DDR3-2400 
Hard DriveHard DriveOSOS
Samsung 850 Pro 256GB SSD (RAID0) Samsung 840 Evo 1TB SSD (x2) OS X 10.9 Windows 8.1 
MonitorKeyboardPowerCase
NEC PA322UHD, NEC P242W x2, NEC EA294WMi IBM Model M SSK Corsair AX1200i CaseLabs MH10 
MouseAudio
SteelSeries Sensei Raw Audeze LCD-XC 
  hide details  
The Mullet
(14 items)
 
Fractal Design R4
(3 photos)
 
CPUMotherboardGraphicsRAM
Intel 3930k @ 5 GHz Asus P9x79 Pro Asus DC2 GTX 780 x3 SLI 64GB G.Skill Ripjaws-Z DDR3-2400 
Hard DriveHard DriveOSOS
Samsung 850 Pro 256GB SSD (RAID0) Samsung 840 Evo 1TB SSD (x2) OS X 10.9 Windows 8.1 
MonitorKeyboardPowerCase
NEC PA322UHD, NEC P242W x2, NEC EA294WMi IBM Model M SSK Corsair AX1200i CaseLabs MH10 
MouseAudio
SteelSeries Sensei Raw Audeze LCD-XC 
  hide details  
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Hardware News
This thread is locked  

Gear mentioned in this thread:

Overclock.net › Forums › Industry News › Hardware News › [AquaComputer] Aquaero 6