Originally Posted by kpoeticg
You don't need poweradjusts with what you listed. The D5 connects to the Aquabus port and the Flowmeter connects to the Flowmeter port. San Ace's do have a bigger amp draw than alot of normal fans, but the A6 is supposed to have the issue fixed where you generate alot of heat when you lower the fan RPM. So you shouldn't have any issue's connecting 6 fans between the 4 ports. I wouldn't waste money on PA's with that setup
That's really strange, the heat at low rpm issue the Aquaero 5 and previous generations have presented. My fans will first begin to spin as low as 250 to 280 rpm with 2.8-3.3 volts applied using my old Lamptron FC5V2 controller rated 30watts/channel and none of the electronics would be more than ever so slightly warm to the touch.
Currently with the FC10 controller 2fans on a single channel running appox. 636rpm 4volts, it's also rated 30Watts/channel and no excessive heat anywhere on the controller board, one component is moderately warm.
I must not know enough about the circumstances that bring on this common scenario, this extreme heat OR the need for the PowerAdjusts. Something to do with pump speed control at low rpms?
Gotta cut me some slack, I'm still living with an H100i mindset.