Sorry for the late update, continue from the previous update.
Now i will show the laser cut off most of my item which done on 3mm clear acrylic. which then will be paint.
So the first thing i bent is the res holder.
i made two so that i can have option of which one fit the best
Here the first one the left from the above pic
Here the one that is on the right
Next i move to the radiator and fan cover.
Since i cut out the upper part to oriented the psu vertically, i made a new holder for it, here it is
Here are the test fitting of the cover and holder
So now we goin to bent the gpu shroud cover.
see how it turns out from the flat acrylic sheet into this beauty
but using skil heatgun does need a lot of patient.
The shroud on the gpu.
To paint n attached the acrylic i only use bosny matte black, ace green flourescent and anchor sparkling black. While the acetone to glue the acrylic
Now we proceed to the cpu block cover.
to bent all around like this is very2 hard, unless if u have a straight heater like the one use by tantric.
Next we go to the spray painting.
Feast your eye
This is the side panel window with hexagon pattern engrave on it
The Cpu block cover.
This is the front intake fins.
The psu cable also has been sleeved.
The Gpu cover
Now we go to the most important part the front panel.
This is the top part.
The most hardestt part to bent, n i failed it.
this is why i failed, got cracked on the edges, thank god i use 3mm since its thick just a small crack wont affect the panel
And then later i got some more crack. the panel suddenly crack when brush acetone to glue the part. i dont know why but all the previous part i attached using the acetone works just fine.
then i attached it back using small part of acrylic using super glue my last option. since all other part i brush with the acetone crack
Now it almost near to completion
here is the place i put my ssd and hdd, i kinda sacrrifice my usb for this. LOL
Sneak Peek of the final product, got lots of update upcoming! with new WC stuff!!
So i buy new keyboard and mouse to match the them, what else could be the best to match my color theme other than RAZER!,
so i buy deathstalker and deathadder 2013, which both have green light