Originally Posted by Lucky 23
Yes but if you use Real temp, core temp, or HWmonitor it will display your current temps and it will also show the max temps your CPU hits while running prime 95
Example here core temp. You have Min & Max to the right, Current temps is on the far left
Yea I'm using hwmonitor which is how I'm viewing my temps. Core temp and their website keeps tripping up my nod32 anti virus and I cba.
Originally Posted by ionstorm66
Do you have the pump connected to USB, and have the software installed? If so check the pump speed and fan speeds, and how they are being controled. With corsairs software you can do some cool stuff. Set the pump and fans at a constant rate, then try again. If you get the same results with pump and fan speeds being static; then something is wrong with the mounting, or the h100i
Arg, I had to switch out my first one already because it was doing horrendous grinding. I REALLY hope this h100i isn't going to be another messed up one, especially after all the effort of figuring out how to mount it correctly on my asus board (backplate had lots of wiggle room without putting some rubber washers to cover the gap). I'm nearly 100% sure I mounted it on correctly this time. I'll try putting the fans on constant tomorrow.Edited by Spudinske - 9/4/13 at 9:40pm