Overclock.net › Forums › Intel › Intel CPUs › I need help OCing this rampage 4 extreme and c1 sr0k9 3930k
New Posts  All Forums:Forum Nav:

I need help OCing this rampage 4 extreme and c1 sr0k9 3930k

post #1 of 3
Thread Starter 
so PPL is at 1.9 now because I am so sick of overclocking it I just used factory default

what should I realistically aim for at 4.6ghz (I know its so low but i am sick of messing around at 4.8 4.9 5.0+ and getting absolutely no where)

motherboard is going out in a few days and I just want to play some games before I have to RMA it for sound issues and possibly dimm c1
post #2 of 3
It sounds like you don't have one of the best chips ever, so I would aim for around....
1.40-1.435v vCORE
1.2-1.25v VTT/VCCSA (C1 stepping can take a lot more voltage here)
1.7-1.8v PLL
180% Current Capability
LLC set to High
VCCSA LLC "Normal"

Also, you can try what I do, which is to use the BCLK (not straps) to get whatever extra I can, as I've found it to essentially be free in terms of voltage. Just set PCI-E skew to -20 and CPU skew to -2 (BCLK skew?) and you are good for around +/-6-8Mhz
   
Z77 Bench-a-lot
(31 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K @ 4.92Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 
GraphicsRAMHard DriveHard Drive
EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T Samsung 830 256GB SSD WD10EZEX 1TB HDD 
Hard DriveHard DriveHard DriveHard Drive
WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB WD3200AAKS 320GB HDD WD5000HHTZ 10krpm 500GB VelociRaptor 
Optical DriveCoolingCoolingCooling
LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 2x Corsair SP120-PE Case Fans 
CoolingCoolingCoolingCooling
Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingOS
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) Windows 7 Professional 64bit  
MonitorMonitorMonitorMonitor
Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell U3014 Eizo 27" 1440p 10bit RGB-LED Backlit AH-IPS Panel 
MonitorKeyboardPowerCase
55" LG HDTV (their top 2014 model) Ducky Mechanical (Browns) NZXT HALE90 850W + 8 blown-up AX1200/i's NZXT Switch 810 (White) 
MouseMouse PadAudioAudio
R.A.T.3 + MX510 My Desk GRADO RS1i Headphones Grado PS1000 Headphones 
OtherOtherOtherOther
Bitfenix Hydra Pro Fan Controller 5ch 30W/ch Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter 
OtherOtherOther
Sleeved Wires w Paracord myself (no Heatshrink) Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
  hide details  
Reply
   
Z77 Bench-a-lot
(31 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K @ 4.92Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 
GraphicsRAMHard DriveHard Drive
EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T Samsung 830 256GB SSD WD10EZEX 1TB HDD 
Hard DriveHard DriveHard DriveHard Drive
WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB WD3200AAKS 320GB HDD WD5000HHTZ 10krpm 500GB VelociRaptor 
Optical DriveCoolingCoolingCooling
LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 2x Corsair SP120-PE Case Fans 
CoolingCoolingCoolingCooling
Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingOS
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) Windows 7 Professional 64bit  
MonitorMonitorMonitorMonitor
Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell U3014 Eizo 27" 1440p 10bit RGB-LED Backlit AH-IPS Panel 
MonitorKeyboardPowerCase
55" LG HDTV (their top 2014 model) Ducky Mechanical (Browns) NZXT HALE90 850W + 8 blown-up AX1200/i's NZXT Switch 810 (White) 
MouseMouse PadAudioAudio
R.A.T.3 + MX510 My Desk GRADO RS1i Headphones Grado PS1000 Headphones 
OtherOtherOtherOther
Bitfenix Hydra Pro Fan Controller 5ch 30W/ch Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter 
OtherOtherOther
Sleeved Wires w Paracord myself (no Heatshrink) Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
  hide details  
Reply
post #3 of 3
Thread Starter 
TYVM
I might just be able to get away with upping current and LLC I supposed

I will take another wack at 4.8-4.9 it was stable there but I lost the clock and person I bought it from was doing 5ghz so I really think It's just my skill this is my first platform I have tried overclocking on Warning: Spoiler! (Click to show)
(before this I had the first 4core amd consumer chip the 9850 phenom black and the only mobo i could OC on (m2n32me sli deluxe) cracked when I installed a thermaltake bigwater so Then I got stuck with a shuttle mobo after the mob broke and case and everyrthing else got stolen.. cpu wasn't in mobo at the time,
so far its been a huge history of marginal victories and frustrating defeats

good news is its peaking at 65c
I got it fairly stable at 4.7ghz
1.334-1.368vCORE
1.193-1.2Vtt 1.24-1.26v VCCSA
1.762-1.77v PLL
130-140% Current Capability
LLC set to medium or High
VCCSA LLC "high"

I will try revising the current capabilities and head towards 4.9
Edited by tatmMRKIV - 9/7/13 at 10:07am
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › I need help OCing this rampage 4 extreme and c1 sr0k9 3930k