post #1 of 1
Thread Starter 
This is driving me nuts, I bought this board for its reasonable price and 8 DIMM capacity, but it seems like something it very wrong with the BIOS.

My 3930k on this board will run at 4.6ghz on auto voltage with maxed out CPU voltage override just on the edge of stability. Load voltage is around 1.365V and it will fail P95 after about 30 minutes.

However, the board WILL NOT run 4.6ghz manually. I tried Turbo off, all the power saving, off. Then set voltage first to 1.375 with 87.5% LLC. Board shuts down immediately upon loading with P95 or IBT.

Same for 1.400V. And then 1.450V. And then 1.500V. As a matter of fact, it will not load at STOCK CPU frequency settings with a manual voltage. Basically, manual voltage doesn't work at all. Anyone know what gives?

System specs:

- 3930k w/ H100i
- GD45 Plus
- 32GB G-skill at 1333 to keep IMC stress down
- Cooler Master V1000 PSU
- 7950 CF
- Win7 Pro
Edited by Scorpion49 - 9/6/13 at 6:32pm