Zawarudo I would like to thank you for your great work and for offering overclocking opportunities to everyone!
I would like however to point out some issues I am facing, and maybe if you are able you can tell me what I am doing wrong:
Info: Using "skyn3-vBios-928-350w-439w-125%slide", 331.40 Beta drivers, MSI Afterburner Beta 15, x64 8.1 RTM.
I have tried unlocking the voltage with your program, and although I did get the "00" response the voltage would not change whenever I clicked apply.
I proceeded onto following the instructions for the 1.3v softmod, which worked and I am currently able to access 1.3v (which renders it to 1.325) in AB.
Trying again to change the voltage with your program did not work, whether I used 1.4v or 1.2v, AB would report whatever I had it set to.
Additionally my previous setup was 1150MHz core clock at 1.212v, which worked fine and was my absolute maximum, however upping the voltage from 1.212v to anything up to 1.325v did not allow me to increase the core clock not a notch as I would get instant lock, hang or driver crash in both games and FurMark - while I see other users reporting as high as 1300MHz+. Note that I used table based clocks; 1163, 1176, 1189, 1202, 1215.
Furthermore, whatever voltage I use, it is always reported fluctuating by around 0.06, meaning that 1.325 fluctuates to 1.319, and 1.213 to 1.206 and so on, something that I am uncertain whether it is normal or not.
Also, selecting "Force constant voltage" in AB, makes absolutely no difference.
What am I missing?
Thanks to anyone who responds in advance