Overclock.net › Forums › Cooling › Water Cooling › [BUILD LOG] WC with rads venting directly into HVAC
New Posts  All Forums:Forum Nav:

[BUILD LOG] WC with rads venting directly into HVAC - Page 7

post #61 of 67
Thread Starter 
Ok, modified the flow design...up to 6053 RPM as the Min...means 6.053 L/min...30% improvement using the primary water intake as opposed to the alternate water intake. That's 1.6 gpm converted.
post #62 of 67
Thread Starter 
Quote:
Originally Posted by jlhawn View Post

water wetter also prevents electrolysis, don't know if that would apply to a computer either, but in a car engine when you mix different types of metals (aluminum & cast iron) and the electrical
current flowing through the engine (automotive 12v DC flows backwards through the negative ground) can cause corrosion. so I would still keep it in your system.

Very true, but there shouldn't be anything besides stainless steel and copper in my setup. Electrolysis doesn't occur between the two as far as I know.
post #63 of 67
Quote:
Originally Posted by JacekRing View Post

Very true, but there shouldn't be anything besides stainless steel and copper in my setup. Electrolysis doesn't occur between the two as far as I know.

thats good too know.
Old X58
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 6 core ASUS Sabertooth X58 MSI GTX 1070 Gaming X GSkill 24 gigs 
Hard DriveHard DriveHard DriveCooling
Crucial MX100 256 gig Crucial M500 120gig WD VelociRaptor 1TB Noctua 
OSMonitorMonitorKeyboard
Windows 7 Pro 64bit LG 29inch widescreen DP LG 29inch widescreen DP Corsair K65 
PowerCaseMouseAudio
EVGA SuperNova G2 1000w Corsair C70 Corsair M65 Sound Blaster Z 
Other
Custom sleeved psu cables 
  hide details  
Reply
Old X58
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 6 core ASUS Sabertooth X58 MSI GTX 1070 Gaming X GSkill 24 gigs 
Hard DriveHard DriveHard DriveCooling
Crucial MX100 256 gig Crucial M500 120gig WD VelociRaptor 1TB Noctua 
OSMonitorMonitorKeyboard
Windows 7 Pro 64bit LG 29inch widescreen DP LG 29inch widescreen DP Corsair K65 
PowerCaseMouseAudio
EVGA SuperNova G2 1000w Corsair C70 Corsair M65 Sound Blaster Z 
Other
Custom sleeved psu cables 
  hide details  
Reply
post #64 of 67
Thread Starter 
Ok....x50 core is off the table frown.gif

Went up to 1.420v and IBT was unstable. Not willing to go higher, was in the 90c range already
post #65 of 67
Thread Starter 
Might be stable at x49 @ 1.380v....ran IBT twice. 10 runs standard, 10 runs high no crash passed both times. Going to be more work tomorrow, will see what vcore it will be stable at minimum.





Edit: BTW, if you look at the GPU core temp that's pretty much my water temp...close to it at least, since I'm not using the GPU's they keep the same temp as the water flowing over them.
Edited by JacekRing - 9/13/13 at 10:19pm
post #66 of 67
Thread Starter 
x49 is NOT stable...up to 1.420v I went, still had rounding errors in Prime95 after a few hours. sigh...I'm going to re-format my SSD, and do a clean install of win7ult 64-bit. Never did that when I swapped my motherboard and changed proc, ram and more.

Also need to update the bios, still on 0224...need to upgarde to 0711, heard there are stability fixes in it.
post #67 of 67
Thread Starter 
Ok bios updated to 0711 and a clean copy of windows 7 ult 64-bit installed. Doing updates and other app installations now
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › [BUILD LOG] WC with rads venting directly into HVAC