Originally Posted by cadaveca
So those that do what I do have time to test the board, make sure that any issues might be covered, and that if needed BIOS updates can be done
C'mon, I'm hardcore overclocker BIOS editing isn't uncommon for me. In fact I'm so hardcore I consider these who don't use BIOS and use overclocking tools as idiots (LN2 excluded, wasting LN2 by doing it properly is bad idea, it would be less minutes of fun). Raja said some overclockers also loathe thermal armor, and that's me as well.
I expect to reflash BIOS at least three times until we would get stable one. BTW it ships with BIOS 403, if you have older version go reflashing. Also it has PCB revision 1.02.
so your first experience is everything it should be.
I had dentist visit and my experience might be: I miss these money for heatsink... and would need to wait at least 14 days more.
youtube videos need to be recorded
They were recorded already and posted on 21 October.
Not likely. If Raja gave a date of the 15th,
Actually that was an estimation, he thought it takes about that long to get MB from Chinese lines to shops.
This board is a big product for ASUS, and they are taking it pretty seriously that I can tell, and that's why everything is this big coordinated event around the globe. Big things take time.
Well, then lets see if you can find these two problems I found already. I might be more sensitive, because PC compensates some of my disability problems, thus PC is for me the same as wheelchair for paraplegic, however when you look and test this board properly they should be obvious.
It might be also worthy to put the board under thermal camera, just to verify things.
Originally Posted by Arm3nian
Why are you canceling your NCIX order?
Because he's baka.
Originally Posted by skupples
Dave broke his NDA already. Look at that photo of his paper figurines.