post #1 of 1
Thread Starter 
Will be gettting my Primo when they ship them so thinking about what to do to it. Figured there are more of you out there thinking along the same lines so let's put our heads together and come up with some ideas and plans. wink.gif

I'll edit this first post and keep a list of what we think of and design with links to post or sight with more detailed info.

First off I'm not an extreme modder so let's try to keep this fairly simple. You know, things I can do with hand tools and a little wood & plastic

Things are collecting in the corner for the Primo... but who knows when it will get here.

* GA-X58A-UD5
* i7 980
* PH-TC14PE_B (have red/orange TY-143 fans.. orange might work but don't think the red will)
* 3x 4GB Crucial Ballistix Sport
* Xonar D2X
* TX750
*Have an Asus ENGTX580 DirectCU II in a day or 2. Thing's a monster! 3 slots wide and 292mm long. Will have to remove or mod the reservoir bracket so it fits.

Definite to does:
* Caster base to match raising case 45-50mm w/ 5-10mm floor clearance. This will be fabricated with void-less 9mm Baltic birch 7 ply plywood and hopefully have grille material to match other grilles.

* Braiding the cables with paracord. What color/colors?
* Paint motherboard black ??? Not sure about this. Trying to figure a way to hide blue Gigabyte and have a nice color scheme. Would be much easier than making a cover by hand.

Once case arrives possibles:
* Mod the front and top grilles. Maybe do a grill in 5.25 bay door with matching borders to lower front grille...
* Change LEDs to remote controlled RGB with lights inside case and custom base too. Maybe put LEDs behind grille strip along side of top and front with or without the stock LED strips?? Have each area of case on it's own power switch too??

All of above are open to suggestions as well as anything we can come up with for Enthoo Primo.
Edited by doyll - 9/12/13 at 3:49pm