Overclock.net › Forums › Intel › Intel CPUs › Overclocking i7-4930k Help
New Posts  All Forums:Forum Nav:

Overclocking i7-4930k Help - Page 2

post #11 of 1411
My System:

CPU: 4930k
MB: Gigabyte ga x79 UP4
Air Cooling: Noctua nh d14 + Fractal Design Arc midi2 case
freq: 4.2 Ghz
Volts: 1.4V (no Offset) with a little Increase in PLL and VCCSA, no Memory-OC. Load Calibration is at "Turbo" (80%)
Temperature are max 78°C under IntelBurnTest and ~ 40°C on idle.

Iam not able to run my 4930k at 4.2Ghz under 1.4V
No POST whenever i go over 4.3GHZ (i tried only up to 1.45 Vcore)

My CPU doesnt seem to be a good one.
post #12 of 1411
Quote:
Originally Posted by iPDrop View Post

Just installed my 4930k today on an EVGA x79 Dark. Took the multiplier to x47 and the VCore to 1.5V. Enabled PLL Overvoltage and changed the PLL voltage to 1.6 and the VCore VDroop to "Intel SPEC" which means 100%

I get blue screens. All of the BSOD codes, as i slowly increased the VCore, were 0x0124 except one was 0x0C2.

I got up to 1.55v on the Vcore and I was like okay I give up, lowered the multipler to x46 and put the VCore @ 1.42v... more 0x0124 blue screens... slowly increased VCore until I got back up to 1.5V and now its not crashing after a few minutes of LinX and P95.

So is this a really bad chip or is there something in the settings that I'm missing/doing incorrectly? 1.5V just for 4.6GHz? I'm going to be running 20 runs of LinX all afternoon to test this clock..

Well these settings are used as a starting settings for liquid nitrogen, after someone tested the CPU to know its engineering limits. Have you really started with these? And you still have your CPU?
post #13 of 1411
Thread Starter 
4930k is a poor overclocker indeed. Oh well, I'm only waiting for an 8-core Haswell-E. Until then this is will do just fine tongue.gifbiggrin.gif

The funny thing is is that my 4930k @ stock clocks was putting out the same 3dm11 physics score as my 3770k was @ 4.9GHz
Callisto
(20 items)
 
Pop's Workstation
(10 items)
 
Dads PC
(11 items)
 
CPUMotherboardGraphicsGraphics
Intel Core i7-4930k @ 4.7GHz 1.4V EVGA X79 Dark ASUS R9 290 Direct CU II  ASUS R9 290 Direct CU II  
GraphicsRAMHard DriveHard Drive
ASUS R9 290 Direct CU II 16GB G.Skill Sniper Series 2400MHz 11 13 13 31 Samsung 840 Pro RAID 0 Samsung 840 Pro RAID 0 
Hard DriveCoolingOSMonitor
Seagate NAS 2TB Cooler Master Glacer Windows 8.1 AOC U2868PQU 28'' 3820x2160 @ 60z 
MonitorKeyboardPowerCase
ASUS VG248QE 24'' 1920x1080 @ 144hz Das Keyboard 4 Ultimate  EVGA SuperNOVA P2 1000W Cooler Master HAF 932 Advanced 
MouseMouse PadAudioAudio
SteelSeries Sensei [RAW] SteelSeries 63010 QcK Mass Mouse Pad Logitech Surround Sound 5.1 (Exterior Speaker S... Sennheiser G4ME ZERO 
CPUGraphicsRAMHard Drive
Intel Core i7-4710MQ  Nvidia Quadro K2100M 8GB (2x4GB) 1600MHz DDR3L 1TB 2.5inch Serial ATA (5,400 Rpm) Hard Drive 
Optical DriveOSMonitorKeyboard
8X DVD-ROM Tray Load Windows 8.1 Pro, 64-bit English Crossover 27'' 2560x1440 60Hz Internal English Backlit Dual Pointing Keyboard 
PowerCase
180W AC Adapter Dell Precision M4800 
CPUMotherboardGraphicsRAM
AMD A4-3300 Llano GIGABYTE GA-A75M-D2H  AMD Radeon HD 6410D Crucial Ballistix Sport 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 External Hard Disk LITE-ON Stock CPU heatsink fan 
MonitorPowerCase
Windows 7 Home Premium Antec 350W eMachines T3104 
  hide details  
Reply
Callisto
(20 items)
 
Pop's Workstation
(10 items)
 
Dads PC
(11 items)
 
CPUMotherboardGraphicsGraphics
Intel Core i7-4930k @ 4.7GHz 1.4V EVGA X79 Dark ASUS R9 290 Direct CU II  ASUS R9 290 Direct CU II  
GraphicsRAMHard DriveHard Drive
ASUS R9 290 Direct CU II 16GB G.Skill Sniper Series 2400MHz 11 13 13 31 Samsung 840 Pro RAID 0 Samsung 840 Pro RAID 0 
Hard DriveCoolingOSMonitor
Seagate NAS 2TB Cooler Master Glacer Windows 8.1 AOC U2868PQU 28'' 3820x2160 @ 60z 
MonitorKeyboardPowerCase
ASUS VG248QE 24'' 1920x1080 @ 144hz Das Keyboard 4 Ultimate  EVGA SuperNOVA P2 1000W Cooler Master HAF 932 Advanced 
MouseMouse PadAudioAudio
SteelSeries Sensei [RAW] SteelSeries 63010 QcK Mass Mouse Pad Logitech Surround Sound 5.1 (Exterior Speaker S... Sennheiser G4ME ZERO 
CPUGraphicsRAMHard Drive
Intel Core i7-4710MQ  Nvidia Quadro K2100M 8GB (2x4GB) 1600MHz DDR3L 1TB 2.5inch Serial ATA (5,400 Rpm) Hard Drive 
Optical DriveOSMonitorKeyboard
8X DVD-ROM Tray Load Windows 8.1 Pro, 64-bit English Crossover 27'' 2560x1440 60Hz Internal English Backlit Dual Pointing Keyboard 
PowerCase
180W AC Adapter Dell Precision M4800 
CPUMotherboardGraphicsRAM
AMD A4-3300 Llano GIGABYTE GA-A75M-D2H  AMD Radeon HD 6410D Crucial Ballistix Sport 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 External Hard Disk LITE-ON Stock CPU heatsink fan 
MonitorPowerCase
Windows 7 Home Premium Antec 350W eMachines T3104 
  hide details  
Reply
post #14 of 1411
Quote:
Originally Posted by iPDrop View Post

4930k is a poor overclocker indeed. Oh well, I'm only waiting for an 8-core Haswell-E. Until then this is will do just fine tongue.gifbiggrin.gif

The funny thing is is that my 4930k @ stock clocks was putting out the same 3dm11 physics score as my 3770k was @ 4.9GHz

defenitely is a better CPU overrall man lol it cost twice as much... in the other hand... bro do some video recroding on youtube... learn how to setup the MSI afterburner to show the FP
and GPU usage please...

other than that... i envy u man... that a nice CPU!
post #15 of 1411
Quote:
Originally Posted by iPDrop View Post

The funny thing is is that my 4930k @ stock clocks was putting out the same 3dm11 physics score as my 3770k was @ 4.9GHz

It's native six core.
post #16 of 1411
Thread Starter 
Quote:
Originally Posted by EliteReplay View Post

defenitely is a better CPU overrall man lol it cost twice as much... in the other hand... bro do some video recroding on youtube... learn how to setup the MSI afterburner to show the FP
and GPU usage please...

other than that... i envy u man... that a nice CPU!

Yeah I knew how to do it at one time but was a long time ago and I forgot.
Quote:
Originally Posted by Raghar View Post

It's native six core.

Yes I'm well aware of the differences in the two CPU's, I was just putting it into perspective.

And thus, I finally got a *stable* clock on my 4930k @ 4.5GHz 1.4V I'll also run 14 hours of Prime95 over the weekend just to be sure.

http://valid.canardpc.com/8wh69t

Callisto
(20 items)
 
Pop's Workstation
(10 items)
 
Dads PC
(11 items)
 
CPUMotherboardGraphicsGraphics
Intel Core i7-4930k @ 4.7GHz 1.4V EVGA X79 Dark ASUS R9 290 Direct CU II  ASUS R9 290 Direct CU II  
GraphicsRAMHard DriveHard Drive
ASUS R9 290 Direct CU II 16GB G.Skill Sniper Series 2400MHz 11 13 13 31 Samsung 840 Pro RAID 0 Samsung 840 Pro RAID 0 
Hard DriveCoolingOSMonitor
Seagate NAS 2TB Cooler Master Glacer Windows 8.1 AOC U2868PQU 28'' 3820x2160 @ 60z 
MonitorKeyboardPowerCase
ASUS VG248QE 24'' 1920x1080 @ 144hz Das Keyboard 4 Ultimate  EVGA SuperNOVA P2 1000W Cooler Master HAF 932 Advanced 
MouseMouse PadAudioAudio
SteelSeries Sensei [RAW] SteelSeries 63010 QcK Mass Mouse Pad Logitech Surround Sound 5.1 (Exterior Speaker S... Sennheiser G4ME ZERO 
CPUGraphicsRAMHard Drive
Intel Core i7-4710MQ  Nvidia Quadro K2100M 8GB (2x4GB) 1600MHz DDR3L 1TB 2.5inch Serial ATA (5,400 Rpm) Hard Drive 
Optical DriveOSMonitorKeyboard
8X DVD-ROM Tray Load Windows 8.1 Pro, 64-bit English Crossover 27'' 2560x1440 60Hz Internal English Backlit Dual Pointing Keyboard 
PowerCase
180W AC Adapter Dell Precision M4800 
CPUMotherboardGraphicsRAM
AMD A4-3300 Llano GIGABYTE GA-A75M-D2H  AMD Radeon HD 6410D Crucial Ballistix Sport 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 External Hard Disk LITE-ON Stock CPU heatsink fan 
MonitorPowerCase
Windows 7 Home Premium Antec 350W eMachines T3104 
  hide details  
Reply
Callisto
(20 items)
 
Pop's Workstation
(10 items)
 
Dads PC
(11 items)
 
CPUMotherboardGraphicsGraphics
Intel Core i7-4930k @ 4.7GHz 1.4V EVGA X79 Dark ASUS R9 290 Direct CU II  ASUS R9 290 Direct CU II  
GraphicsRAMHard DriveHard Drive
ASUS R9 290 Direct CU II 16GB G.Skill Sniper Series 2400MHz 11 13 13 31 Samsung 840 Pro RAID 0 Samsung 840 Pro RAID 0 
Hard DriveCoolingOSMonitor
Seagate NAS 2TB Cooler Master Glacer Windows 8.1 AOC U2868PQU 28'' 3820x2160 @ 60z 
MonitorKeyboardPowerCase
ASUS VG248QE 24'' 1920x1080 @ 144hz Das Keyboard 4 Ultimate  EVGA SuperNOVA P2 1000W Cooler Master HAF 932 Advanced 
MouseMouse PadAudioAudio
SteelSeries Sensei [RAW] SteelSeries 63010 QcK Mass Mouse Pad Logitech Surround Sound 5.1 (Exterior Speaker S... Sennheiser G4ME ZERO 
CPUGraphicsRAMHard Drive
Intel Core i7-4710MQ  Nvidia Quadro K2100M 8GB (2x4GB) 1600MHz DDR3L 1TB 2.5inch Serial ATA (5,400 Rpm) Hard Drive 
Optical DriveOSMonitorKeyboard
8X DVD-ROM Tray Load Windows 8.1 Pro, 64-bit English Crossover 27'' 2560x1440 60Hz Internal English Backlit Dual Pointing Keyboard 
PowerCase
180W AC Adapter Dell Precision M4800 
CPUMotherboardGraphicsRAM
AMD A4-3300 Llano GIGABYTE GA-A75M-D2H  AMD Radeon HD 6410D Crucial Ballistix Sport 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 External Hard Disk LITE-ON Stock CPU heatsink fan 
MonitorPowerCase
Windows 7 Home Premium Antec 350W eMachines T3104 
  hide details  
Reply
post #17 of 1411
Quote:
Originally Posted by iPDrop View Post

Just installed my 4930k today on an EVGA x79 Dark. Took the multiplier to x47 and the VCore to 1.5V. Enabled PLL Overvoltage and changed the PLL voltage to 1.6 and the VCore VDroop to "Intel SPEC" which means 100%

I get blue screens. All of the BSOD codes, as i slowly increased the VCore, were 0x0124 except one was 0x0C2.

I got up to 1.55v on the Vcore and I was like okay I give up, lowered the multipler to x46 and put the VCore @ 1.42v... more 0x0124 blue screens... slowly increased VCore until I got back up to 1.5V and now its not crashing after a few minutes of LinX and P95.

So is this a really bad chip or is there something in the settings that I'm missing/doing incorrectly? 1.5V just for 4.6GHz? I'm going to be running 20 runs of LinX all afternoon to test this clock..

Maybe you just have too high expectations?
Core I7 5960X
(10 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core I7 5960X ASRock X99 OC Formula MSI GTX 970 Gaming MSI GTX 970 Gaming 
RAMHard DriveCoolingOS
G. Skill 16GB DDR4 2600 Sandisk Extreme II 240GB SSD Custom 480 Water Setup Windows 10 
PowerCase
AX1500I Corsair 900D 
  hide details  
Reply
Core I7 5960X
(10 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core I7 5960X ASRock X99 OC Formula MSI GTX 970 Gaming MSI GTX 970 Gaming 
RAMHard DriveCoolingOS
G. Skill 16GB DDR4 2600 Sandisk Extreme II 240GB SSD Custom 480 Water Setup Windows 10 
PowerCase
AX1500I Corsair 900D 
  hide details  
Reply
post #18 of 1411
Quote:
Originally Posted by iPDrop View Post

4930k is a poor overclocker indeed. Oh well, I'm only waiting for an 8-core Haswell-E. Until then this is will do just fine tongue.gifbiggrin.gif

The funny thing is is that my 4930k @ stock clocks was putting out the same 3dm11 physics score as my 3770k was @ 4.9GHz

I noticed the exact same thing when going from 3770k to 3930k.

after installing the 4930k, I can't run 3dmark anymore. I get a gui failed to run error.
post #19 of 1411
If you can crank at 4.5 GHz at 1.4v, I'd say you got a decent 4930K. I certainly wouldn't run it higher than 1.4, and if it were MY chip I wouldn't exceed 1.35v. The smaller the junctions, the lower the voltage it takes to end up with electron migration, and that's always bad. With 22nm cores, I wouldn't be surprised to see long-term damage at 1.4v begin to settle in after a matter of weeks. Still too new to say for sure, but you're a Week 1 buyer and we need somebody to do the risky experimentation for us. =)

Gratz on the 4.5 ant 4930K!

Greg
post #20 of 1411
I'm getting 4.2 with 1.38V @ 65C

Will keep pushing tomorrow. I don't have the best OC board, but until the RIVE BE cones out, this will do. My cooler is also temporary until my loop is completed.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Overclocking i7-4930k Help