Overclock.net › Forums › Cooling › Water Cooling › Outlets and inlets
New Posts  All Forums:Forum Nav:

Outlets and inlets

post #1 of 3
Thread Starter 
I know loop order matters little etc and can put rads whichever suits best but does it matter if the inlet and outlet on the cpu is block reversed? just completed my loop and noticed the fluid going the opposite way I thought it would, derp award.

Thanks in advance
post #2 of 3
That is a good question. I had done this. I figured there was an in and out labeled for a reason and fixed it, but I am not so sure how it would matter.

I would say if you temps are good, leave it alone.
post #3 of 3
Thread Starter 
Quote:
Originally Posted by selluminis View Post

That is a good question. I had done this. I figured there was an in and out labeled for a reason and fixed it, but I am not so sure how it would matter.

I would say if you temps are good, leave it alone.

Lol,just stress testing now and seems fine. Have no delta`s to compare for myself on water on this haswell, if had done it on my piledriver I would know immediately. See how goes, thanks for the reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Outlets and inlets