Overclock.net › Forums › Software, Programming and Coding › Networking & Security › How should I configure a gateway and new router on network?
New Posts  All Forums:Forum Nav:

How should I configure a gateway and new router on network? - Page 2

post #11 of 13
Thread Starter 
Quote:
Originally Posted by Kylepdalton View Post

Do you have Uverse or DSL? Also what is the model number on the 2wire gateway?

If you have DSL do not put the tp-link ip in a DMZ. You just have to switch the gateway to bridge mode. Then connect the gateway to the WAN port of the tp-link and let it do all the work.

If you have Uverse you can still use your tp-link but some of the 2wire Uverse gateways do not support bridge mode so you have to change a lot of settings to pass thought the network.

Model: 3800HGV-B


I'm not sure if ti is Uverse or DSL. I used to have Uverse but then we changed TV to direct TV and dropped the phone line.

Does this help?



is this what you are talking about with the bridge mode?

Quote:
Originally Posted by Nixalot View Post

Quote:
Originally Posted by Sean Webster View Post

Nothing else via ATT anymore. Just the internet.

The new router DHCP range starts at 192.168.0.100 and ends at 192.168.0.199. Is it OK to extend the range? Does it affect anything? Say to change to 250 instead of 199?

All the other settings above are fine? Nothing to change?

The reason for stopping at 199 is because above 200 is "special" usually. Reserved for multicast traffic and other such things. From a practical standpoint it probably wouldn't hurt anything, but I personally would go the other way if more addresses are needed, start at 50 instead of 100
ok thanks
Le Main Rig
(17 items)
 
 
CPUMotherboardGraphicsRAM
i7-6700K Asus Sabertooth Z170 Mark 1 Gigabyte GTX 960 WindForce 2X OC G.SKILL Ripjaws V  
Hard DriveHard DriveHard DriveHard Drive
1050GB Crucial MX300 1050GB Crucial MX300 960GB OCZ RD400 1TB Micron M600 
Hard DriveCoolingOSMonitor
1TB WD Blue Noctua NH-U12S Windows 10 Pro 64-Bit BenQ GW2765HT 
MonitorKeyboardPowerCase
BenQ GW2765HT FUNC KB-460 Corsair RM650 Fractal Design R5 
Mouse
Logitec G500 
  hide details  
Reply
Le Main Rig
(17 items)
 
 
CPUMotherboardGraphicsRAM
i7-6700K Asus Sabertooth Z170 Mark 1 Gigabyte GTX 960 WindForce 2X OC G.SKILL Ripjaws V  
Hard DriveHard DriveHard DriveHard Drive
1050GB Crucial MX300 1050GB Crucial MX300 960GB OCZ RD400 1TB Micron M600 
Hard DriveCoolingOSMonitor
1TB WD Blue Noctua NH-U12S Windows 10 Pro 64-Bit BenQ GW2765HT 
MonitorKeyboardPowerCase
BenQ GW2765HT FUNC KB-460 Corsair RM650 Fractal Design R5 
Mouse
Logitec G500 
  hide details  
Reply
post #12 of 13
Yea that is the VDSL gateway and it doesn't have a true bridge mode. You can trick it somewhat though effectively making it a passthrough. These instructions are for 3600 but it should be the same.

1. Set your router's WAN interface to get an IP address via DHCP. This is required at first so that the 2Wire recognizes your router.

2. Plug your router's WAN interface to one of the 2Wire's LAN interfaces.

3. Restart your router, let it get an IP address via DHCP.

4. Log into the 2Wire router's interface. Go to Settings -> Firewall -> Applications, Pinholes, and DMZ

5. Select your router under section (1).

6. Click the DMZPlus button under section (2).

7. Click the Save button.

8. Restart your router, when it gets an address via DHCP again, it will be the public outside IP address. At this point, you can leave your router in DHCP mode (make sure the firewall on your router allows the DHCP renewal packets, which will occur every 10 minutes), or you can change your router's IP address assignment on the WAN interface to static, and use the same settings it received via DHCP.

9. On the 2Wire router, go to Settings -> Firewall -> Advanced Configuration

10. Uncheck the following: Stealth Mode, Block Ping, Strict UDP Session Control.

11. Check everything under Outbound Protocol Control except NetBIOS.

12. Uncheck NetBIOS under Inbound Protocol Control.

13. Uncheck all the Attack Detection checkboxes (7 of them).

14. Click Save.

Steps 9 thru13 will force your TP-Link to handle everything. You have to have your TP-Link act as your firewall if you do them.. They are not necessary but you could have some connection issues with the router and gateway both acting as a firewalls.
Edited by Kylepdalton - 9/26/13 at 1:18am
Red-Scout
(18 items)
 
Asus G53SX-TH71
(12 items)
 
Big Blue
(12 items)
 
CPUMotherboardGraphicsGraphics
AMD 8320 FX Asus Crosshair V Twin Frozr 6950 Twin Frozr 6950 
RAMHard DriveHard DriveHard Drive
Corsair Vengence Red Crucial M4 Western Digital Raptor 300gb Western Digital 1 TB Black 
Optical DriveCoolingOSMonitor
LG Blu-ray Corsair H80 Windows 7 Professional Asus VE248H x3 
KeyboardPowerCaseMouse
Logitech MX 5500 Revolution Black Thermaltake TR2 RX 750w CoolerMaster Storm Scout MX Revolution Cordless Laser Mouse 
AudioAudio
Logitech X-540 5.1 System Creative Sound Blaster X-Fi Titanium Fatal1ty 
CPUMotherboardGraphicsRAM
Intel Core i7 2670QM G53SX NVIDIA GeForce GTX 560M Samsung  
RAMRAMRAMHard Drive
Corsair  Samsung  Corsair  Corsair Force GT3 
Hard DriveOptical DriveOSMonitor
Hitachi Blu-Ray Drive Windows 7 Professional 15.4" 1080p 
CPUMotherboardGraphicsRAM
AMD FX 8120 Asus M5A99FX Pro R2.0 MSI Windforce 6850 Kingston Hyper-Blue 16Gb 
Hard DriveHard DriveHard DriveCooling
3x Seagate Barracuda 3Tb OCZ Agility 2 64Gb 3x OCZ Vertex 2 Plus 32 Gb Cooler Master Seidon 120mm 
OSOSPowerCase
Windows Server 2012 Standard VMs (Server 2012, Windows 7, Windows 8, Ubuntu,... PC Power and Cooling 500w Silencer NXZT Switch 810 
  hide details  
Reply
Red-Scout
(18 items)
 
Asus G53SX-TH71
(12 items)
 
Big Blue
(12 items)
 
CPUMotherboardGraphicsGraphics
AMD 8320 FX Asus Crosshair V Twin Frozr 6950 Twin Frozr 6950 
RAMHard DriveHard DriveHard Drive
Corsair Vengence Red Crucial M4 Western Digital Raptor 300gb Western Digital 1 TB Black 
Optical DriveCoolingOSMonitor
LG Blu-ray Corsair H80 Windows 7 Professional Asus VE248H x3 
KeyboardPowerCaseMouse
Logitech MX 5500 Revolution Black Thermaltake TR2 RX 750w CoolerMaster Storm Scout MX Revolution Cordless Laser Mouse 
AudioAudio
Logitech X-540 5.1 System Creative Sound Blaster X-Fi Titanium Fatal1ty 
CPUMotherboardGraphicsRAM
Intel Core i7 2670QM G53SX NVIDIA GeForce GTX 560M Samsung  
RAMRAMRAMHard Drive
Corsair  Samsung  Corsair  Corsair Force GT3 
Hard DriveOptical DriveOSMonitor
Hitachi Blu-Ray Drive Windows 7 Professional 15.4" 1080p 
CPUMotherboardGraphicsRAM
AMD FX 8120 Asus M5A99FX Pro R2.0 MSI Windforce 6850 Kingston Hyper-Blue 16Gb 
Hard DriveHard DriveHard DriveCooling
3x Seagate Barracuda 3Tb OCZ Agility 2 64Gb 3x OCZ Vertex 2 Plus 32 Gb Cooler Master Seidon 120mm 
OSOSPowerCase
Windows Server 2012 Standard VMs (Server 2012, Windows 7, Windows 8, Ubuntu,... PC Power and Cooling 500w Silencer NXZT Switch 810 
  hide details  
Reply
post #13 of 13
Thread Starter 
Thanks, all done! biggrin.gif
Le Main Rig
(17 items)
 
 
CPUMotherboardGraphicsRAM
i7-6700K Asus Sabertooth Z170 Mark 1 Gigabyte GTX 960 WindForce 2X OC G.SKILL Ripjaws V  
Hard DriveHard DriveHard DriveHard Drive
1050GB Crucial MX300 1050GB Crucial MX300 960GB OCZ RD400 1TB Micron M600 
Hard DriveCoolingOSMonitor
1TB WD Blue Noctua NH-U12S Windows 10 Pro 64-Bit BenQ GW2765HT 
MonitorKeyboardPowerCase
BenQ GW2765HT FUNC KB-460 Corsair RM650 Fractal Design R5 
Mouse
Logitec G500 
  hide details  
Reply
Le Main Rig
(17 items)
 
 
CPUMotherboardGraphicsRAM
i7-6700K Asus Sabertooth Z170 Mark 1 Gigabyte GTX 960 WindForce 2X OC G.SKILL Ripjaws V  
Hard DriveHard DriveHard DriveHard Drive
1050GB Crucial MX300 1050GB Crucial MX300 960GB OCZ RD400 1TB Micron M600 
Hard DriveCoolingOSMonitor
1TB WD Blue Noctua NH-U12S Windows 10 Pro 64-Bit BenQ GW2765HT 
MonitorKeyboardPowerCase
BenQ GW2765HT FUNC KB-460 Corsair RM650 Fractal Design R5 
Mouse
Logitec G500 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Networking & Security
Overclock.net › Forums › Software, Programming and Coding › Networking & Security › How should I configure a gateway and new router on network?