When I finally figure out how to jump the PSU I'll be going through some very nerve racking testing. I plan to leave it running with the pump on its highest setting for 48 hours while gently tapping/moving the tubbing and connections to ensure that all is well. I plan to get a bunch of MF towels around the innards of the case and then place paper towels over that. I figure if I can get past that initial test I should be golden then I'll drain and refill with fresh water and reduce pump to an appropriate level.
Originally Posted by Levelog
Caught it leaking. 24 hours of it not leaking and now I'm up and running.