Overclock.net › Forums › Case Mods & Cases › Computer Cases › Corsair 750D Owners Club
New Posts  All Forums:Forum Nav:

Corsair 750D Owners Club - Page 708

post #7071 of 9370
@erso44 are you putting 3 rads? Front bottom and top? Curious
post #7072 of 9370
Quote:
Originally Posted by godiegogo214 View Post

@erso44 are you putting 3 rads? Front bottom and top? Curious

actually 2 now. Front and top. You can see it on the pictures. Why curious biggrin.gif
post #7073 of 9370
For a second thought you where going to do 3 rads lol
post #7074 of 9370
Quote:
Originally Posted by cephelix View Post

i think corsair makes the grilled front panel for the 750D though i'm not sure if it's available yet
or you could get one from here

They were out of stock so my buddy called Corsair up and tore them a new one asking if they were stupid not putting out a version themselves. biggrin.gif

Of course he got nowhere but he isn't known for his tact smile.gif
post #7075 of 9370
Quote:
Originally Posted by texmaster View Post

They were out of stock so my buddy called Corsair up and tore them a new one asking if they were stupid not putting out a version themselves. biggrin.gif

Of course he got nowhere but he isn't known for his tact smile.gif
Lok..gotta be patient with these things i suppose + the luck of the draw
Floored
(18 items)
 
  
CPUMotherboardGraphicsRAM
i7 4790K Gigabyte Z97X Gaming 7 MSI R9 290 Gaming 4G Kingston Low Voltage Value Ram 
Hard DriveHard DriveCoolingCooling
Crucial M500 480GB Western Digital Green 3TB Noctua NH-D15 Nidec Servo Gentle Typhoons 1850rpm x 8 
OSMonitorMonitorKeyboard
Windows 8.1 Pro 64-bit Philips 240B1CB 1920 x 1200 Samsung Syncmaster 2443BW 1920 x 1200 Filco Majestouch 2 Ninja TKL 
PowerCaseMouseMouse Pad
Seasonic X750 Corsair Obsidian 750D Zowie FK-1 Barracuda Juggernaut 
AudioOther
Corsair H2100 Wireless Headset NZXT Sentry 3  
  hide details  
Reply
Floored
(18 items)
 
  
CPUMotherboardGraphicsRAM
i7 4790K Gigabyte Z97X Gaming 7 MSI R9 290 Gaming 4G Kingston Low Voltage Value Ram 
Hard DriveHard DriveCoolingCooling
Crucial M500 480GB Western Digital Green 3TB Noctua NH-D15 Nidec Servo Gentle Typhoons 1850rpm x 8 
OSMonitorMonitorKeyboard
Windows 8.1 Pro 64-bit Philips 240B1CB 1920 x 1200 Samsung Syncmaster 2443BW 1920 x 1200 Filco Majestouch 2 Ninja TKL 
PowerCaseMouseMouse Pad
Seasonic X750 Corsair Obsidian 750D Zowie FK-1 Barracuda Juggernaut 
AudioOther
Corsair H2100 Wireless Headset NZXT Sentry 3  
  hide details  
Reply
post #7076 of 9370
Quote:
Originally Posted by godiegogo214 View Post

How are you guys handling airflow? I know that good airflow on the 750d is a mission especially you @1quickchic with 4 rads

lol yeah I kinda went overkill, was planning on water cooling everything, but I haven't gotten my gpu blocks yet, and at the moment really cant choose to make that decision (dealing with health problems)

but atm this is what is in the case

Top - Alphacool xt45 /420mm with 3 corsair 140mm's in push and 3 bit fenix pro's in pull (mounted outside case with a koolance fan shroud for aesthetics
Rear Alphacool xt30140mm with 2 corsair 140mm push/pull configuration
bottom Alphcool xt 30 240 mm with 2 corsair 120mm in pull
front Alphacool xt 30 120mm with a corsair 140mm in push and another corsair 140mm above in for addition intake air
2 ek 150mm res x3's
1 ek d5 pwm pump
1 Xspc raystorm cpu block
and eventually I will be getting 2 Ek full card gpu blocks

currently temp is 39c -402c idle (close to room temp, and 52c loaded fans all running minimal speed I am thinking the fan speed will increase once I have the gpu blocks, but not sure atm

I posted a pic a few pages back if you want to see my rig, its not done but I would say its 70%, I am also going to add 1 more ssd that I am going to be custom mounting facing the window, and will be moving one I have mounted on a tray to the same so 2 ssd's will be facing the window

I also am either going to change coolant or try the remove some of the pearl out of the aurora coolant I am using.
post #7077 of 9370
im starting some small mods on my case and components over the next few weeks, i will create a small thread

ive ordered some sleeve wire and shrink from e22 and sleeved my 2 sata cables one turned out better than the other and since it was my 1st attempt at them/ just have one more to do
i also wanted to make a custom molex wire for the fan controller so it can be routed out the way better so that is my next lil thing.

ive also painted my ssd white and added a temp probe by cutting a tab out the side. There was no thermal pads on the chips so i added one to the controller (i was always intrigued as to what heat they put out) sat typing this it says 27c when running atto it goes to 31.

my dominator hypers are dead so cant use them (was going to paint the top fins) will need do a rma with corsair if i can





the ugly bit in the top pic was painters tape holding a temp probe to the cpu rad. it fell off lol
post #7078 of 9370
@richie_2010 are you going to do the Mobo tray mod still , or decided it is too much work ?
post #7079 of 9370
hi buddy.
i think im going give it a miss, its to much work for me atm since i have no room to do anything.
The ssd will be mounted up To the side. the hdd will be hidden behind the tray.
Need get the molex wire fitted properly then sleeved Im nervous though ive copied the connection layout on the stock cables but yet to test it
post #7080 of 9370
Quote:
Originally Posted by richie_2010 View Post

hi buddy.
i think im going give it a miss, its to much work for me atm since i have no room to do anything.
The ssd will be mounted up To the side. the hdd will be hidden behind the tray.
Need get the molex wire fitted properly then sleeved Im nervous though ive copied the connection layout on the stock cables but yet to test it
Yeah , it does take a lot of work , and you need to be prepared to have the system out of action for a while to do it right.

Yes indeed cables , i can relate to that fear , id be worried too , i will be doing my fairly soon , i will get a PSU this week , my last component , i will be labeling everything pretty clearly.
I need to start this job as i want to thread cables through acrylic mobo tray and make the cables , connecting ends after threading them through holes , also a big job
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › Corsair 750D Owners Club