Originally Posted by The12Apostles
I was going to go with:
1 - Removing three of the hdd racks from the bottom up so that my two 3.5 drives sit at the top two racks
2 - leaving the 3 stock fans in the front set to intake
3 - placing two 140 mm NZXT FN fans with green led (I have the white case and I am going for a white/green theme) set to intake
4 - placing a h90 in push/pull on the rear for the cpu
That's pretty much how I ended up setting my fans and it cools pretty well.
I opted to use the 2 bottom HDD trays, but that's only because I'm using 3 x 120mm fans on top and didn't want the 3rd fan blocked.
The front fans that come with the case do a good enough job in my opinion and removing all unused HDD trays helped a lot in keeping my GPUs cool
I have the top fans as intake also, but went for 3 x 120mm (only because they were the only fans I had to hand, but 2 x 140mm should be fine) and have my h80i as a push/pull exhaust
This case seems to be a bit of a trial and error with airflowEdited by BlockLike - 4/8/14 at 3:26am