Update 3 - Rack building/Cooler Installation/Other fun stuff
All laid out
All put together
Ram arrived too
So this is where this build gets a little ghetto. With the heatsinks on the ram did not clear the cooler, so that had to go.
All I can say is
Finally I was able to get the cooler installed
With blue lights cause we can
So thats all I got for now.
The combo of Noctua coolers/case are slightly disappointing. They are super quiet, but the temps for one of the cpus is above 70c. I am almost certain this is the back cpu. I am pretty sure this is due to poor case design.
Speaking of case design, you can tell the person who made this case was drunk. I am not sure why they thought it was a great idea to have the PSU blowing directly where a second CPU would logically go. This is combined with the fact that there is only two tiny 80mm fans to drive exhaust out the back. Not too mention you have to disassemble half the case to get the drive cage out or that while the front locks, you only have to undo two screws to get the top off.
More to comeEdited by Kitler - 10/10/13 at 12:41am