Overclock.net › Forums › Cooling › Water Cooling › [Build Log] CaseLabs MAGNUM TH10 - Oreaopla
New Posts  All Forums:Forum Nav:

[Build Log] CaseLabs MAGNUM TH10 - Oreaopla - Page 6

post #51 of 53
Thread Starter 
So I've been delayed with posting any real update because I've been trying to acquire all my components. Should be finishing up almost everything but the monitor, keyboard, mouse, headphones and fittings. I have a bunch of Aquatuning orders coming in as well as some extra items from CaseLabs and FrozenCPU.

In terms of my rads and push-pull configuration, I'm trying to figure out what PWM splitter to use. Any input on these two?

ModMyToys 4-Pin Molex/SATA Power Distribution PCB or Swiftech 8-Way PWM Cable Splitter - SATA Power

I'm also trying to figure out what LEDs to use in my Aquacomputer reservoirs. Each holds Six 5mm LEDs and I'd like to mix in red, white and orange somewhere. Perhaps a single color per reservoir and then throw in a strip of LEDs somewhere in the case.
Will three of these work per resrvoir or should I look at single LEDs? Dual 5mm LEDs w/ Tailed Standard 4 Pin Connector - Red

My issue then is figuring out how to power all of them which seems like it would require a power distributor of some sort.

This one if I get molex LEDs? Bitspower X-Station Power Extension II - Red LED

This one with 2 pin LEDs? Bitspower X-Station LED Power Hub - Red LED
post #52 of 53
I have both the PMW splitters and I would get the swifttech.. it is of better quality!!!
post #53 of 53
Thread Starter 
Quote:
Originally Posted by seross69 View Post

I have both the PMW splitters and I would get the swifttech.. it is of better quality!!!

Sounds like a plan. I'm going to mount 20 total fans. 8 on each of my two rads, 2 in the bottom front of the case for intake and 2 in the top rear as exhaust. The rad fans will all go on the swiftech splitter and I believe there are enough headers on the motherboard for the other 4 fans so that's good to go. In terms of LEDs, what the best way to add and power a bunch of LEDs? Molex plugs and splitters or the 2 pin setups and a splitter like the Bitspower X-Station LED Power Hub - Red LED?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › [Build Log] CaseLabs MAGNUM TH10 - Oreaopla