Overclock.net › Forums › Intel › Intel CPUs › [MOD] LGA775 Support For LGA771 Xeon CPUs
New Posts  All Forums:Forum Nav:

[MOD] LGA775 Support For LGA771 Xeon CPUs - Page 968

post #9671 of 12470
Quote:
Originally Posted by BuckeyeBattle View Post

Let me explain for throughly, I will go through the steps I've taken thus far

1)Flash bios to latest version (1.3.0)
2)installed modded e5450 cpu
3)added 771 cpu microde to bios
4)reset cmos

Now, when I try to boot off of my hard drive into Windows 10, I get a never ending startup. I tried to install Windows 7 by disc for a clean install but it would not boot. Thus I tried to use dban on my usb to wipe the hard drive and clean install. Did not work either - thus now I have taken out my hard drive , hooked it up to my other pc, and am using the Windows 10 reset feature to reinstall Windows 10 onto the hard drive.
Umm,Instead of reinstalling windows 10 on the drive from a different comp, why didn't you try re-installing Win 10 off a usb? https://www.microsoft.com/en-us/software-download/windows10/ This way you won't have the issue of conflicting hardware when you switch the drive back.(motherboard,video,ect.) and it will still have the valid code.(just leave blank when re-installing)
Edited by schuck6566 - 6/1/16 at 8:13pm
post #9672 of 12470
Quote:
Originally Posted by schuck6566 View Post

Umm,Instead of reinstalling windows 10 on the drive from a different comp, why didn't you try re-installing Win 10 off a usb? https://www.microsoft.com/en-us/software-download/windows10/ This way you won't have the issue of conflicting hardware when you switch the drive back.(motherboard,video,ect.) and it will still have the valid code.(just leave blank when re-installing)
This morning I tried creating a bootable Windows 10 usb (followed the same exact instructions at that link) and the usb would not boot. The Windows 10 reset was a failure and now I am installing Windows 7 onto the hdd and will update if I can boot into that OS.
post #9673 of 12470
Quote:
Originally Posted by schuck6566 View Post

Umm,Instead of reinstalling windows 10 on the drive from a different comp, why didn't you try re-installing Win 10 off a usb? https://www.microsoft.com/en-us/software-download/windows10/ This way you won't have the issue of conflicting hardware when you switch the drive back.(motherboard,video,ect.) and it will still have the valid code.(just leave blank when re-installing)

Update: WELL ILL BE DAMNED. After the longest Windows start up I have ever experienced in the windows logo flickered like a CRT monitor operating at 10hz, the system booed successfully into Windows 7. I am now in the operating system and can really start to trouble shoot now that I have access to system resources. What should I do first to make sure the processor is operating correctly ? Download CPUz?
post #9674 of 12470
Quote:
Originally Posted by BuckeyeBattle View Post

Update: WELL ILL BE DAMNED. After the longest Windows start up I have ever experienced in the windows logo flickered like a CRT monitor operating at 10hz, the system booed successfully into Windows 7. I am now in the operating system and can really start to trouble shoot now that I have access to system resources. What should I do first to make sure the processor is operating correctly ? Download CPUz?
CPU-Z and coretemp. U may also want to try running the usb for Win10 from inside windows(incase your bios/board doesn't allow booting from usb) If u need to, U may also want to use the ISO file for WIN 10 and make a usb boot with Rufus instead. https://rufus.akeo.ie/ Some people have a better result getting it to load with older boards.
post #9675 of 12470
Quote:
Originally Posted by HaleyBang View Post

I've archived no random reboots with my E5450 but I'm getting a lot of "lag" (the game freezes for half a second) while gaming, especialy BF3. Is not because the CPU is running hot. What could be the problem?

For example the game is running at 60 FPS but then it freezes half a second, goes to 30 ~ 40 FPS and seconds later it goes back to 60 FPS. CPU usage between 60 ~ 70% and the same with GPU. I'm gonna try to update GPU drivers.

Now I'm running the E5450 at 2.7GHz (1.225V, PCIe 100MHz, 320MHz Bus Speed, SPD 2.5 (so RAM is running at 800MHz)).

Check this post to stay updated: http://www.overclock.net/t/1431723/mod-lga775-support-for-lga771-xeon-cpus/9610#post_25207961
I just ck'd some old tesy results, even the 7850's with 2Gb ram were only averaging about 54 FPS @ 1080 in BF3 with a i72600k @4.5 and 4Gb ram http://www.tomshardware.com/reviews/radeon-hd-7870-review-benchmark,3148-6.html So for the 1 Gb and clock speeds, I'd say it was more or less a matter of tweaking.
post #9676 of 12470
Quote:
Originally Posted by schuck6566 View Post

CPU-Z and coretemp. U may also want to try running the usb for Win10 from inside windows(incase your bios/board doesn't allow booting from usb) If u need to, U may also want to use the ISO file for WIN 10 and make a usb boot with Rufus instead. https://rufus.akeo.ie/ Some people have a better result getting it to load with older boards.

Before i upgrade to windows 10 I want to get things running smooth on windows 7. Everything is happening painfully slow with a great deal of lag , moving the mouse, opening files, loading programs etc
However, in safe mode, the computer runs like a champ! quick response and everything. any clue?
post #9677 of 12470
Whispers ... don't want to say this too loud but I think I'm stable at 4.2Ghz - over an hour without any core failing on prime small test. Maximum temp 60C.

Sent from my SM-G900I using Tapatalk
     
CPUMotherboardGraphicsRAM
Xeon X5470 Gigabyte GA-EP45-UD3P Palit GTX 260 OCZ Reaper DDR2 1066 5-5-5-15 4x2GB 
Hard DriveHard DriveOptical DriveCooling
LITEONIT LCT-128M3S SAMSUNG HD502HJ ASUS DRW-24D5MT Zalman CNPS9900 Max 
CoolingOSMonitorPower
5 x 120mm Bitfenix Spectre Black  W7 Ultimate 64 bit ASUS VH222 Antec 650w Earthwatts 
CaseOther
DeepCool Tesseract BF Mid Tower Case USB 3.0 5GB/s 2 Port HUB 20 Pin Port PCi-E Addo... 
CPUMotherboardGraphicsRAM
Xeon E5450 Asus P5Q Gigabyte GTX 570 SOC OCZ DDR2 1066 Platinum 2 x 2GB 
RAMCoolingOSPower
Kingston HyperX 2 x 1GB DeepCool Gammaxx 400 W7 Ultimate 64 bit CoolerMaster Thunder 700W 
Case
Cooler Master Centurion 5 
CPUMotherboardGraphicsRAM
Intel Xeon L5430 Gigabyte GA-G41MT-D3 Integrated Intel Graphics Media Accelerator X45... 2 x 4GB Corsair XMS3 
CoolingOSCaseOther
ID-COOLING Denmark Series DK-03 Amahi Gigabyte GZM2 4 Port USB 3.0 PCI-E Card 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Xeon X5470 Gigabyte GA-EP45-UD3P Palit GTX 260 OCZ Reaper DDR2 1066 5-5-5-15 4x2GB 
Hard DriveHard DriveOptical DriveCooling
LITEONIT LCT-128M3S SAMSUNG HD502HJ ASUS DRW-24D5MT Zalman CNPS9900 Max 
CoolingOSMonitorPower
5 x 120mm Bitfenix Spectre Black  W7 Ultimate 64 bit ASUS VH222 Antec 650w Earthwatts 
CaseOther
DeepCool Tesseract BF Mid Tower Case USB 3.0 5GB/s 2 Port HUB 20 Pin Port PCi-E Addo... 
CPUMotherboardGraphicsRAM
Xeon E5450 Asus P5Q Gigabyte GTX 570 SOC OCZ DDR2 1066 Platinum 2 x 2GB 
RAMCoolingOSPower
Kingston HyperX 2 x 1GB DeepCool Gammaxx 400 W7 Ultimate 64 bit CoolerMaster Thunder 700W 
Case
Cooler Master Centurion 5 
CPUMotherboardGraphicsRAM
Intel Xeon L5430 Gigabyte GA-G41MT-D3 Integrated Intel Graphics Media Accelerator X45... 2 x 4GB Corsair XMS3 
CoolingOSCaseOther
ID-COOLING Denmark Series DK-03 Amahi Gigabyte GZM2 4 Port USB 3.0 PCI-E Card 
  hide details  
Reply
post #9678 of 12470
Quote:
Originally Posted by Rich22 View Post

So I tried the game of overclocking my PC further once more, on the proviso of a 1.37vcore limit...

Current tested rock solid settings: 400x9=3.6 ram 1:1=800 4-4-4-12

I set the RAM timings as loose as they can go (6-6-6-18)
I tried 4ghz with 1.37v. (444x9 ram 1:1) All other voltages are set pretty high.
No joy. I know it does work at 1.45vcore but that's not what I'm trying to achieve.

Ok, next I tried the suggested trick of lowering the multi and checking things out.
450x6 tried- failed to boot, cold restart necessary, preparing automatic repair, couldn't repair, cold reboot, same **** all over...

My board really doesn't like high FSB clocks does it!! I also tried 444x8 and it didn't even like that?!?

I think the ram is fine, I had that running ok at 1066 5-5-5-15 prime tested, and also higher speeds briefly. Pfff. Stupid thing. Anyway, it's too late to think any more about this. Time to enjoy 6 hours sleep

Rich,
You really need to post all your settings. 6 hours . . . it kinda takes over your life doesn't it?
     
CPUMotherboardGraphicsRAM
Xeon X5470 Gigabyte GA-EP45-UD3P Palit GTX 260 OCZ Reaper DDR2 1066 5-5-5-15 4x2GB 
Hard DriveHard DriveOptical DriveCooling
LITEONIT LCT-128M3S SAMSUNG HD502HJ ASUS DRW-24D5MT Zalman CNPS9900 Max 
CoolingOSMonitorPower
5 x 120mm Bitfenix Spectre Black  W7 Ultimate 64 bit ASUS VH222 Antec 650w Earthwatts 
CaseOther
DeepCool Tesseract BF Mid Tower Case USB 3.0 5GB/s 2 Port HUB 20 Pin Port PCi-E Addo... 
CPUMotherboardGraphicsRAM
Xeon E5450 Asus P5Q Gigabyte GTX 570 SOC OCZ DDR2 1066 Platinum 2 x 2GB 
RAMCoolingOSPower
Kingston HyperX 2 x 1GB DeepCool Gammaxx 400 W7 Ultimate 64 bit CoolerMaster Thunder 700W 
Case
Cooler Master Centurion 5 
CPUMotherboardGraphicsRAM
Intel Xeon L5430 Gigabyte GA-G41MT-D3 Integrated Intel Graphics Media Accelerator X45... 2 x 4GB Corsair XMS3 
CoolingOSCaseOther
ID-COOLING Denmark Series DK-03 Amahi Gigabyte GZM2 4 Port USB 3.0 PCI-E Card 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Xeon X5470 Gigabyte GA-EP45-UD3P Palit GTX 260 OCZ Reaper DDR2 1066 5-5-5-15 4x2GB 
Hard DriveHard DriveOptical DriveCooling
LITEONIT LCT-128M3S SAMSUNG HD502HJ ASUS DRW-24D5MT Zalman CNPS9900 Max 
CoolingOSMonitorPower
5 x 120mm Bitfenix Spectre Black  W7 Ultimate 64 bit ASUS VH222 Antec 650w Earthwatts 
CaseOther
DeepCool Tesseract BF Mid Tower Case USB 3.0 5GB/s 2 Port HUB 20 Pin Port PCi-E Addo... 
CPUMotherboardGraphicsRAM
Xeon E5450 Asus P5Q Gigabyte GTX 570 SOC OCZ DDR2 1066 Platinum 2 x 2GB 
RAMCoolingOSPower
Kingston HyperX 2 x 1GB DeepCool Gammaxx 400 W7 Ultimate 64 bit CoolerMaster Thunder 700W 
Case
Cooler Master Centurion 5 
CPUMotherboardGraphicsRAM
Intel Xeon L5430 Gigabyte GA-G41MT-D3 Integrated Intel Graphics Media Accelerator X45... 2 x 4GB Corsair XMS3 
CoolingOSCaseOther
ID-COOLING Denmark Series DK-03 Amahi Gigabyte GZM2 4 Port USB 3.0 PCI-E Card 
  hide details  
Reply
post #9679 of 12470
Quote:
Originally Posted by BuckeyeBattle View Post

Before i upgrade to windows 10 I want to get things running smooth on windows 7. Everything is happening painfully slow with a great deal of lag , moving the mouse, opening files, loading programs etc
However, in safe mode, the computer runs like a champ! quick response and everything. any clue?

Any exclamation marks in hardware manager???
Sounds like Windows mightn't like something? Try reinstalling W7 over your current installation before moving on. Take out any unnecessary cards etc before doing so - strip it back to the bare essentials.
     
CPUMotherboardGraphicsRAM
Xeon X5470 Gigabyte GA-EP45-UD3P Palit GTX 260 OCZ Reaper DDR2 1066 5-5-5-15 4x2GB 
Hard DriveHard DriveOptical DriveCooling
LITEONIT LCT-128M3S SAMSUNG HD502HJ ASUS DRW-24D5MT Zalman CNPS9900 Max 
CoolingOSMonitorPower
5 x 120mm Bitfenix Spectre Black  W7 Ultimate 64 bit ASUS VH222 Antec 650w Earthwatts 
CaseOther
DeepCool Tesseract BF Mid Tower Case USB 3.0 5GB/s 2 Port HUB 20 Pin Port PCi-E Addo... 
CPUMotherboardGraphicsRAM
Xeon E5450 Asus P5Q Gigabyte GTX 570 SOC OCZ DDR2 1066 Platinum 2 x 2GB 
RAMCoolingOSPower
Kingston HyperX 2 x 1GB DeepCool Gammaxx 400 W7 Ultimate 64 bit CoolerMaster Thunder 700W 
Case
Cooler Master Centurion 5 
CPUMotherboardGraphicsRAM
Intel Xeon L5430 Gigabyte GA-G41MT-D3 Integrated Intel Graphics Media Accelerator X45... 2 x 4GB Corsair XMS3 
CoolingOSCaseOther
ID-COOLING Denmark Series DK-03 Amahi Gigabyte GZM2 4 Port USB 3.0 PCI-E Card 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Xeon X5470 Gigabyte GA-EP45-UD3P Palit GTX 260 OCZ Reaper DDR2 1066 5-5-5-15 4x2GB 
Hard DriveHard DriveOptical DriveCooling
LITEONIT LCT-128M3S SAMSUNG HD502HJ ASUS DRW-24D5MT Zalman CNPS9900 Max 
CoolingOSMonitorPower
5 x 120mm Bitfenix Spectre Black  W7 Ultimate 64 bit ASUS VH222 Antec 650w Earthwatts 
CaseOther
DeepCool Tesseract BF Mid Tower Case USB 3.0 5GB/s 2 Port HUB 20 Pin Port PCi-E Addo... 
CPUMotherboardGraphicsRAM
Xeon E5450 Asus P5Q Gigabyte GTX 570 SOC OCZ DDR2 1066 Platinum 2 x 2GB 
RAMCoolingOSPower
Kingston HyperX 2 x 1GB DeepCool Gammaxx 400 W7 Ultimate 64 bit CoolerMaster Thunder 700W 
Case
Cooler Master Centurion 5 
CPUMotherboardGraphicsRAM
Intel Xeon L5430 Gigabyte GA-G41MT-D3 Integrated Intel Graphics Media Accelerator X45... 2 x 4GB Corsair XMS3 
CoolingOSCaseOther
ID-COOLING Denmark Series DK-03 Amahi Gigabyte GZM2 4 Port USB 3.0 PCI-E Card 
  hide details  
Reply
post #9680 of 12470
Quote:
Originally Posted by BuckeyeBattle View Post

Before i upgrade to windows 10 I want to get things running smooth on windows 7. Everything is happening painfully slow with a great deal of lag , moving the mouse, opening files, loading programs etc
However, in safe mode, the computer runs like a champ! quick response and everything. any clue?
Had a similar issue with a notebook I did a clran install on, ended up stripping it.(was cheap & got frustrated) here's some other advice I found for ya,

In safe mode click on the start menu and type msconfig, then enter. Select Diagnostic mode.

All AV and other services and startup programs will be disabled when you boot into normal mode.

You may then reenter msconfig and selectively check items you want to boot under the Services tab and under the startup tab. This will allow you to determine the program causing it, you may then uninstall it.

NOTE: your computer may not work as you expect if you have certain services disabled under msconfig, so if you have issues you may have something disabled that your computer needs!
Here's a couple of tips for using this method. First, on the Services tab click on the Hide All Microsoft Services option, since it's unlikely to be any of them. Second, initially only turn off the first half of what's left on the Services or Startup tabs, reboot, and check the speed. If it's OK, then it was one of the ones you turned off, and you can repeat the process by only turning off half of them and retesting. If it's not any faster, repeat the process reversing which are on and off. This will generally allow you to determine the offending service (or startup program) more quickly. – martineau May 21 '12 at 19:07 Furthermore,there are issues with microsoft update after service pack1 is installed. Part of the reason I thought U may like to go to Windows 10. I can say that Win 10 IS supported on the Vostro 220 if that's any help.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [MOD] LGA775 Support For LGA771 Xeon CPUs