Overclock.net › Forums › Intel › Intel CPUs › [MOD] LGA775 Support For LGA771 Xeon CPUs
New Posts  All Forums:Forum Nav:

[MOD] LGA775 Support For LGA771 Xeon CPUs - Page 972

post #9711 of 12463
Quote:
Originally Posted by Rich22 View Post

Due to the reports of faster speeds for an SSD when connected via ACHI, I made the switch across, which was a bit of a faff, having to boot into safe mode before I could get back into Windows normally. Benchmarking tools show only negligible gains.

And just to throw this out there again: I don't know how some of you guys stomach the mechanical rubbish as OS drives any more, SSDs have been the most transformative change in home computing in the past decade.

I hear what you're saying and I agree.
I'm just saying that if you revert to IDE, you will not notice any significant difference - but it could solve some problems.
MTC
     
CPUMotherboardGraphicsRAM
Xeon X5470 Gigabyte GA-EP45-UD3P Palit GTX 260 OCZ Reaper DDR2 1066 5-5-5-15 4x2GB 
Hard DriveHard DriveOptical DriveCooling
LITEONIT LCT-128M3S SAMSUNG HD502HJ ASUS DRW-24D5MT Zalman CNPS9900 Max 
CoolingOSMonitorPower
5 x 120mm Bitfenix Spectre Black  W7 Ultimate 64 bit ASUS VH222 Antec 650w Earthwatts 
CaseOther
DeepCool Tesseract BF Mid Tower Case USB 3.0 5GB/s 2 Port HUB 20 Pin Port PCi-E Addo... 
CPUMotherboardGraphicsRAM
Xeon E5450 Asus P5Q Gigabyte GTX 570 SOC OCZ DDR2 1066 Platinum 2 x 2GB 
RAMCoolingOSPower
Kingston HyperX 2 x 1GB DeepCool Gammaxx 400 W7 Ultimate 64 bit CoolerMaster Thunder 700W 
Case
Cooler Master Centurion 5 
CPUMotherboardGraphicsRAM
Intel Xeon L5430 Gigabyte GA-G41MT-D3 Integrated Intel Graphics Media Accelerator X45... 2 x 4GB Corsair XMS3 
CoolingOSCaseOther
ID-COOLING Denmark Series DK-03 Amahi Gigabyte GZM2 4 Port USB 3.0 PCI-E Card 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Xeon X5470 Gigabyte GA-EP45-UD3P Palit GTX 260 OCZ Reaper DDR2 1066 5-5-5-15 4x2GB 
Hard DriveHard DriveOptical DriveCooling
LITEONIT LCT-128M3S SAMSUNG HD502HJ ASUS DRW-24D5MT Zalman CNPS9900 Max 
CoolingOSMonitorPower
5 x 120mm Bitfenix Spectre Black  W7 Ultimate 64 bit ASUS VH222 Antec 650w Earthwatts 
CaseOther
DeepCool Tesseract BF Mid Tower Case USB 3.0 5GB/s 2 Port HUB 20 Pin Port PCi-E Addo... 
CPUMotherboardGraphicsRAM
Xeon E5450 Asus P5Q Gigabyte GTX 570 SOC OCZ DDR2 1066 Platinum 2 x 2GB 
RAMCoolingOSPower
Kingston HyperX 2 x 1GB DeepCool Gammaxx 400 W7 Ultimate 64 bit CoolerMaster Thunder 700W 
Case
Cooler Master Centurion 5 
CPUMotherboardGraphicsRAM
Intel Xeon L5430 Gigabyte GA-G41MT-D3 Integrated Intel Graphics Media Accelerator X45... 2 x 4GB Corsair XMS3 
CoolingOSCaseOther
ID-COOLING Denmark Series DK-03 Amahi Gigabyte GZM2 4 Port USB 3.0 PCI-E Card 
  hide details  
Reply
post #9712 of 12463
Quote:
Originally Posted by Revhead View Post

Switch to IDE. Your problems will go away.
Huh, my e5450 is running Win 10 on another system fine, but it's in ide mode. Well, Might as well try it. smile.gif Edit: the vostro has ata,raid,& achi as the options.Was setup on achi before,now any other shows as inaccesable boot drive. Gonna see if Windows can repair it to boot in ata.If not, I'll toss the Q9550 back in over the weekend.
Edited by schuck6566 - 6/3/16 at 8:11pm
post #9713 of 12463
Quote:
Originally Posted by Revhead View Post

I hear what you're saying and I agree.
I'm just saying that if you revert to IDE, you will not notice any significant difference - but it could solve some problems.
MTC
I agree with that, some of these boards really struggle with their ACHI implementation- plus like I was saying you won't notice a TINY (perhaps 2%) difference anyway.
    
CPUMotherboardGraphicsRAM
E5450 Asus P5B Deluxe Wifi AP 9600GT 4 GB Buffalo Firestix 
Hard Drive
850 EVO SSD 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
E5450 Asus P5B Deluxe Wifi AP 9600GT 4 GB Buffalo Firestix 
Hard Drive
850 EVO SSD 
  hide details  
Reply
post #9714 of 12463
VID = 1.2375
My x5470 rock solid at 4.2Ghz (420x10). Three passes of MemTest86 (4hours) and Prime95 small test (10 hours), both without error.
Core, 1.33v FSB 1.3v NB 1.36v SB 1.2 Mem 2.1v (5-5-5-18)
Two odd things I noticed.
I'd just performed a BIOS reset and neglected to turn off the things you're supposed to turn off in Advanced ie. No-Execute Memory Protect was enabled, Thermal Monitor enabled, C1E was enabled, EIST was enabled - but it worked anyway.
Also temps were really strange. Maximum was 72C on Core 1, but Core 4 which is normally the Core that fails only hit 59C - can't explain that? Normally the spread is fairly even about 4C between them.

******Motherboard Intelligent Tweaker (M.I.T.)******

Robust Graphics Booster.........................[ Auto ]
CPU Clock Ratio.................................[ 10 ]
Fine CPU Clock Ratio............................[ + 0.0 ]
CPU Frequency 4.05GHz...........................[ 420 x 10.0]

******Clock Chip Control******

CPU Host Clock Control..........................[ Enabled ]
CPU Host Frequency (Mhz)........................[ 420 ]
PCI Express Frequency (Mhz).....................[ 100 ]
C.I.A 2.........................................[ Disabled ]

******Advanced Clock Control******

CPU Clock Drive.................................[ 1000mv ]
PCI Express Clock Drive.........................[ 1000mv ]
CPU Clock Skew..................................[ 0ps
MCH Clock Skew..................................[ 50ps ]

******DRAM Performance Control******

Performance Enhance.............................[ Standard ]
Extreme Memory Profile (XMP). . . . . . . . . . [ Disabled ]
(G) MCH Frequency Latch.........................[ 400Mhz ]
System Memory Multipler.........................[ 2.00D ]
Memory Frequency 1066...........................[ 840 ]
DRAM Timing Selectable..........................[ Manual ]

CAS Latency Time................................[ 5 ]
tRCD............................................[ 5 ]
tRP.............................................[ 5 ]
tRAS............................................[ 18]

******Advanced Timing Control******

tRRD[4].........................................[ Auto ]
tWTR[4].........................................[ Auto ]
tWR[8]..........................................[ Auto ]
tRFC[72]........................................[ Auto ]
tRTP[4].........................................[ Auto ]
Command Rate (cmd)[0]...........................[ Auto ]

******Channel A Timing Settings******

Static tRead Value [ 11 ] .............[ 10 ]
tRD Phase0 Adjustment [ 0 ] ................[ Auto ]
tRD Phase1 Adjustment [ 0 ] ................[ Auto ]
tRD Phase2 Adjustment [ 0 ] ................[ Auto ]
tRD Phase3 Adjustment [ 0 ] ................[ Auto ]

tRD 2rd (Differnt Rank) [ 6 ] ................[ Auto ]
tWR 2wr (Differnt Rank) [ 6 ] ................[ Auto ]
tWR 2rd (Differnt Rank) [ 5 ] ................[ Auto ]
tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto ]

Dimm 1 Clock Skew Control.......................[ Auto ]
Dimm 2 Clock Skew Control.......................[ Auto ]
DDR Write Training..............................[ Auto ]

******Channel A Driving Settings******

Drive Strength Profile..........................[ Auto ]
Data Driving Pull Up Level......................[ Auto ]
cmd Driving Pull Up Level.......................[ Auto ]
ctrl Driving Pull Up Level......................[ Auto ]
clk Driving Pull Up Level.......................[ Auto ]

Data Driving Pull Down Level....................[ Auto ]
cmd Driving Pull Down Level.....................[ Auto ]
ctrl Driving Pull Down Level....................[ Auto ]
clk Driving Pull Down Level.....................[ Auto ]

******Channel B Timing Settings******

Static tRead Value [ 11 ] ................[ 10 ]
tRD Phase0 Adjustment [ 0 ] ................[ Auto ]
tRD Phase1 Adjustment [ 0 ] ................[ Auto ]
tRD Phase2 Adjustment [ 0 ] ................[ Auto ]
tRD Phase3 Adjustment [ 0 ] ................[ Auto ]

tRD 2rd (Differnt Rank) [ 6 ] ................[ Auto ]
tWR 2wr (Differnt Rank) [ 6 ] ................[ Auto ]
tWR 2rd (Differnt Rank) [ 5 ] ................[ Auto ]
tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto ]

Dimm 1 Clock Skew Control.......................[ Auto ]
Dimm 2 Clock Skew Control.......................[ Auto ]
DDR Write Training..............................[ Auto ]

******Channel B Driving Settings******

Drive Strength Profile..........................[ Auto ]
Data Driving Pull Up Level......................[ Auto ]
cmd Driving Pull Up Level.......................[ Auto ]
ctrl Driving Pull Up Level......................[ Auto ]
clk Driving Pull Up Level.......................[ Auto ]

Data Driving Pull Down Level....................[ Auto ]
cmd Driving Pull Down Level.....................[ Auto ]
ctrl Driving Pull Down Level....................[ Auto ]
clk Driving Pull Down Level.....................[ Auto ]

******Motherboard Voltage Control******

Load-Line Calibration...........................[ Enabled ]
CPU Vcore [ 1.237 ]...................[ 1.331v ]
CPU Termination [ 1.20 ]...................[ 1.30 ]
CPU PLL [ 1.50 ]...................[ 1.5 ]
CPU Reference [ 0.760 ]...................[ 0.808 ]

MCH Core [ 1.100 ]...................[ 1.36 ]
MCH Reference [ 0.760 ]...................[ 0.863 ]
MCH/DRAM Refernce [ 0.900 ]...................[ Auto ]
ICH I/O [ 1.500 ]...................[ 1.57 ]
ICH Core [ 1.100 ]...................[ 1.2 ]

DRAM Voltage [ 1.800 ]................[ 2.10v ]
DRAM Termination [ 0.900 ]...................[ Auto]
Channel A Ref [ 0.900 ]...................[ Auto ]
Channel B Ref [ 0.900 ]...................[ Auto ]

******Advanced BIOS Features******

Limit CPUID Max to 3............................[ Disabled ]
No-Execute memory Protect.......................[ Enabled ]
CPU Enhance Halt (CIE)..........................[ Enabled ]
C2/C2E State Support............................[ Disabled ]
C4/C4E State Support............................[ Not present ]
CPU Thermal Monitor.............................[ Enabled ]
CPU EIST Function...............................[ Enabled ]
Virtualization Technology.......................[ Enabled ]
Edited by Revhead - 6/13/16 at 5:41pm
     
CPUMotherboardGraphicsRAM
Xeon X5470 Gigabyte GA-EP45-UD3P Palit GTX 260 OCZ Reaper DDR2 1066 5-5-5-15 4x2GB 
Hard DriveHard DriveOptical DriveCooling
LITEONIT LCT-128M3S SAMSUNG HD502HJ ASUS DRW-24D5MT Zalman CNPS9900 Max 
CoolingOSMonitorPower
5 x 120mm Bitfenix Spectre Black  W7 Ultimate 64 bit ASUS VH222 Antec 650w Earthwatts 
CaseOther
DeepCool Tesseract BF Mid Tower Case USB 3.0 5GB/s 2 Port HUB 20 Pin Port PCi-E Addo... 
CPUMotherboardGraphicsRAM
Xeon E5450 Asus P5Q Gigabyte GTX 570 SOC OCZ DDR2 1066 Platinum 2 x 2GB 
RAMCoolingOSPower
Kingston HyperX 2 x 1GB DeepCool Gammaxx 400 W7 Ultimate 64 bit CoolerMaster Thunder 700W 
Case
Cooler Master Centurion 5 
CPUMotherboardGraphicsRAM
Intel Xeon L5430 Gigabyte GA-G41MT-D3 Integrated Intel Graphics Media Accelerator X45... 2 x 4GB Corsair XMS3 
CoolingOSCaseOther
ID-COOLING Denmark Series DK-03 Amahi Gigabyte GZM2 4 Port USB 3.0 PCI-E Card 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Xeon X5470 Gigabyte GA-EP45-UD3P Palit GTX 260 OCZ Reaper DDR2 1066 5-5-5-15 4x2GB 
Hard DriveHard DriveOptical DriveCooling
LITEONIT LCT-128M3S SAMSUNG HD502HJ ASUS DRW-24D5MT Zalman CNPS9900 Max 
CoolingOSMonitorPower
5 x 120mm Bitfenix Spectre Black  W7 Ultimate 64 bit ASUS VH222 Antec 650w Earthwatts 
CaseOther
DeepCool Tesseract BF Mid Tower Case USB 3.0 5GB/s 2 Port HUB 20 Pin Port PCi-E Addo... 
CPUMotherboardGraphicsRAM
Xeon E5450 Asus P5Q Gigabyte GTX 570 SOC OCZ DDR2 1066 Platinum 2 x 2GB 
RAMCoolingOSPower
Kingston HyperX 2 x 1GB DeepCool Gammaxx 400 W7 Ultimate 64 bit CoolerMaster Thunder 700W 
Case
Cooler Master Centurion 5 
CPUMotherboardGraphicsRAM
Intel Xeon L5430 Gigabyte GA-G41MT-D3 Integrated Intel Graphics Media Accelerator X45... 2 x 4GB Corsair XMS3 
CoolingOSCaseOther
ID-COOLING Denmark Series DK-03 Amahi Gigabyte GZM2 4 Port USB 3.0 PCI-E Card 
  hide details  
Reply
post #9715 of 12463
This is ridiculous. Success comes in 2s. Over an hour stable in Prime at 4.3Ghz. Maximum temps 69C and only 4C difference.
     
CPUMotherboardGraphicsRAM
Xeon X5470 Gigabyte GA-EP45-UD3P Palit GTX 260 OCZ Reaper DDR2 1066 5-5-5-15 4x2GB 
Hard DriveHard DriveOptical DriveCooling
LITEONIT LCT-128M3S SAMSUNG HD502HJ ASUS DRW-24D5MT Zalman CNPS9900 Max 
CoolingOSMonitorPower
5 x 120mm Bitfenix Spectre Black  W7 Ultimate 64 bit ASUS VH222 Antec 650w Earthwatts 
CaseOther
DeepCool Tesseract BF Mid Tower Case USB 3.0 5GB/s 2 Port HUB 20 Pin Port PCi-E Addo... 
CPUMotherboardGraphicsRAM
Xeon E5450 Asus P5Q Gigabyte GTX 570 SOC OCZ DDR2 1066 Platinum 2 x 2GB 
RAMCoolingOSPower
Kingston HyperX 2 x 1GB DeepCool Gammaxx 400 W7 Ultimate 64 bit CoolerMaster Thunder 700W 
Case
Cooler Master Centurion 5 
CPUMotherboardGraphicsRAM
Intel Xeon L5430 Gigabyte GA-G41MT-D3 Integrated Intel Graphics Media Accelerator X45... 2 x 4GB Corsair XMS3 
CoolingOSCaseOther
ID-COOLING Denmark Series DK-03 Amahi Gigabyte GZM2 4 Port USB 3.0 PCI-E Card 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Xeon X5470 Gigabyte GA-EP45-UD3P Palit GTX 260 OCZ Reaper DDR2 1066 5-5-5-15 4x2GB 
Hard DriveHard DriveOptical DriveCooling
LITEONIT LCT-128M3S SAMSUNG HD502HJ ASUS DRW-24D5MT Zalman CNPS9900 Max 
CoolingOSMonitorPower
5 x 120mm Bitfenix Spectre Black  W7 Ultimate 64 bit ASUS VH222 Antec 650w Earthwatts 
CaseOther
DeepCool Tesseract BF Mid Tower Case USB 3.0 5GB/s 2 Port HUB 20 Pin Port PCi-E Addo... 
CPUMotherboardGraphicsRAM
Xeon E5450 Asus P5Q Gigabyte GTX 570 SOC OCZ DDR2 1066 Platinum 2 x 2GB 
RAMCoolingOSPower
Kingston HyperX 2 x 1GB DeepCool Gammaxx 400 W7 Ultimate 64 bit CoolerMaster Thunder 700W 
Case
Cooler Master Centurion 5 
CPUMotherboardGraphicsRAM
Intel Xeon L5430 Gigabyte GA-G41MT-D3 Integrated Intel Graphics Media Accelerator X45... 2 x 4GB Corsair XMS3 
CoolingOSCaseOther
ID-COOLING Denmark Series DK-03 Amahi Gigabyte GZM2 4 Port USB 3.0 PCI-E Card 
  hide details  
Reply
post #9716 of 12463
Hello everyone!
So i have a teeny tiny problem i've been facing for the past few months. I consider myself quite the techie, i've been building pc-s since i was 10 years old. But now i am faced with a bug thats been bothering me since 4 months ago.
My specs are :
Asus P5K (the original, rev:1.0)
2x2 Gb DDR2-800 (One Samsung and one Kingmax, i know, i know, i am quite the cheapo, bought the two for 4 dollars)
2x1 Gb DDR2-800 (Geil ones biggrin.gif )
1x 160 GB Sata2 drive
1x 1000 Gb Sata2 drive
1x Asus Sata2 DVD drive
ATI HD5770 1Gb Pci-ex

and my latest admission to the pc is a XEON E5405 (i know, i know, i'm still a cheapo).
So i bought the cpu from china, its a premodded version, no need for and 775 to 771 adapter, it is already cut on the pcb, and is soldered at the needed contact points.
While i was waiting for it to arrive i read all about it on the interwebs, different sites, different forums. So collected all was needed and waited. Cpu came in neat packaging. Examined it, no outside marks or anything, installed it, added some cpu "grease" (AS5) and started it with the original cooler, got the ominous "unrecognized cpu detected ... blah blah " message. But, pc booted fine, ran like a child when its on fire, because speedfan and aida64 both said that the cpu temp was 95 degrees celsius, but each of the cores were only 35-40 degrees. So, got the latest bios, (1201), modded it with the correct microcodes, reboot, enter asus ez-flash2, flash, reboot, unplug, use jumper to reset cmos, plug in go to bios, load defaults, save and restart. And then nothing, POSTed fine, gave me a message that it was checking nvram and than only the flashing cursor remained, no hdd movement, no anything. So, reflashed with the original bios, restarted without resetting the cmos and it booted perfectly.
That was in the end of january, since then i added a gamma archer 12cm cpu cooler, but i still could not get the cpu to work correclty, it is missing funcionality, and i cant install windows 8.1 or 10 64bit because it is missing compareexchange128. I flashed quite a few of bioses but this one got me.
Also i tried this cpu in one of the computers at work, it has an asus p5kpl-m board, installed the cpu, downloaded and modded the bios, flashed it and it worked perfectly. So i am quite sure that i did the bios mod correctly.
Also i tried a pci post tester card and it gave me no errors.

Any suggestions are welcome.
But just to make sure here are the steps i take after bios flashing:
- Unplug pc
- Move jumper to clear cmos (also tried with removing the battery for 30 seconds and than pressing power)
- Press power button 10 times, 11th time for 30 seconds,
- reset jumper, replug cable, power on pc
- bios gives an option to load defaults ( also tried with going into bios and there selecting to load defaults)

But still no boot, after flashing it wont even boot cd-s, dvd-s nor usb-s.
post #9717 of 12463
Quote:
Originally Posted by darthdevil View Post

Hello everyone!
So i have a teeny tiny problem i've been facing for the past few months. I consider myself quite the techie, i've been building pc-s since i was 10 years old. But now i am faced with a bug thats been bothering me since 4 months ago.
My specs are :
Asus P5K (the original, rev:1.0)
2x2 Gb DDR2-800 (One Samsung and one Kingmax, i know, i know, i am quite the cheapo, bought the two for 4 dollars)
2x1 Gb DDR2-800 (Geil ones biggrin.gif )
1x 160 GB Sata2 drive
1x 1000 Gb Sata2 drive
1x Asus Sata2 DVD drive
ATI HD5770 1Gb Pci-ex

and my latest admission to the pc is a XEON E5405 (i know, i know, i'm still a cheapo).
So i bought the cpu from china, its a premodded version, no need for and 775 to 771 adapter, it is already cut on the pcb, and is soldered at the needed contact points.
While i was waiting for it to arrive i read all about it on the interwebs, different sites, different forums. So collected all was needed and waited. Cpu came in neat packaging. Examined it, no outside marks or anything, installed it, added some cpu "grease" (AS5) and started it with the original cooler, got the ominous "unrecognized cpu detected ... blah blah " message. But, pc booted fine, ran like a child when its on fire, because speedfan and aida64 both said that the cpu temp was 95 degrees celsius, but each of the cores were only 35-40 degrees. So, got the latest bios, (1201), modded it with the correct microcodes, reboot, enter asus ez-flash2, flash, reboot, unplug, use jumper to reset cmos, plug in go to bios, load defaults, save and restart. And then nothing, POSTed fine, gave me a message that it was checking nvram and than only the flashing cursor remained, no hdd movement, no anything. So, reflashed with the original bios, restarted without resetting the cmos and it booted perfectly.
That was in the end of january, since then i added a gamma archer 12cm cpu cooler, but i still could not get the cpu to work correclty, it is missing funcionality, and i cant install windows 8.1 or 10 64bit because it is missing compareexchange128. I flashed quite a few of bioses but this one got me.
Also i tried this cpu in one of the computers at work, it has an asus p5kpl-m board, installed the cpu, downloaded and modded the bios, flashed it and it worked perfectly. So i am quite sure that i did the bios mod correctly.
Also i tried a pci post tester card and it gave me no errors.

Any suggestions are welcome.
But just to make sure here are the steps i take after bios flashing:
- Unplug pc
- Move jumper to clear cmos (also tried with removing the battery for 30 seconds and than pressing power)
- Press power button 10 times, 11th time for 30 seconds,
- reset jumper, replug cable, power on pc
- bios gives an option to load defaults ( also tried with going into bios and there selecting to load defaults)

But still no boot, after flashing it wont even boot cd-s, dvd-s nor usb-s.

Try this BIOS instead? Insn't there a whole P5K thread on here?
P5K1201.zip 637k .zip file
     
CPUMotherboardGraphicsRAM
Xeon X5470 Gigabyte GA-EP45-UD3P Palit GTX 260 OCZ Reaper DDR2 1066 5-5-5-15 4x2GB 
Hard DriveHard DriveOptical DriveCooling
LITEONIT LCT-128M3S SAMSUNG HD502HJ ASUS DRW-24D5MT Zalman CNPS9900 Max 
CoolingOSMonitorPower
5 x 120mm Bitfenix Spectre Black  W7 Ultimate 64 bit ASUS VH222 Antec 650w Earthwatts 
CaseOther
DeepCool Tesseract BF Mid Tower Case USB 3.0 5GB/s 2 Port HUB 20 Pin Port PCi-E Addo... 
CPUMotherboardGraphicsRAM
Xeon E5450 Asus P5Q Gigabyte GTX 570 SOC OCZ DDR2 1066 Platinum 2 x 2GB 
RAMCoolingOSPower
Kingston HyperX 2 x 1GB DeepCool Gammaxx 400 W7 Ultimate 64 bit CoolerMaster Thunder 700W 
Case
Cooler Master Centurion 5 
CPUMotherboardGraphicsRAM
Intel Xeon L5430 Gigabyte GA-G41MT-D3 Integrated Intel Graphics Media Accelerator X45... 2 x 4GB Corsair XMS3 
CoolingOSCaseOther
ID-COOLING Denmark Series DK-03 Amahi Gigabyte GZM2 4 Port USB 3.0 PCI-E Card 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Xeon X5470 Gigabyte GA-EP45-UD3P Palit GTX 260 OCZ Reaper DDR2 1066 5-5-5-15 4x2GB 
Hard DriveHard DriveOptical DriveCooling
LITEONIT LCT-128M3S SAMSUNG HD502HJ ASUS DRW-24D5MT Zalman CNPS9900 Max 
CoolingOSMonitorPower
5 x 120mm Bitfenix Spectre Black  W7 Ultimate 64 bit ASUS VH222 Antec 650w Earthwatts 
CaseOther
DeepCool Tesseract BF Mid Tower Case USB 3.0 5GB/s 2 Port HUB 20 Pin Port PCi-E Addo... 
CPUMotherboardGraphicsRAM
Xeon E5450 Asus P5Q Gigabyte GTX 570 SOC OCZ DDR2 1066 Platinum 2 x 2GB 
RAMCoolingOSPower
Kingston HyperX 2 x 1GB DeepCool Gammaxx 400 W7 Ultimate 64 bit CoolerMaster Thunder 700W 
Case
Cooler Master Centurion 5 
CPUMotherboardGraphicsRAM
Intel Xeon L5430 Gigabyte GA-G41MT-D3 Integrated Intel Graphics Media Accelerator X45... 2 x 4GB Corsair XMS3 
CoolingOSCaseOther
ID-COOLING Denmark Series DK-03 Amahi Gigabyte GZM2 4 Port USB 3.0 PCI-E Card 
  hide details  
Reply
post #9718 of 12463
Quote:
Originally Posted by Revhead View Post

Ken,
This is the latest official BIOS as far as I can see.
731N3P05.zip 723k .zip file

I finally got around to downloading that file and when I looked at the text file it indicated it was for a 680i bios instead of 650i and no indication if it was for BFG. Is this one OK to use?
post #9719 of 12463
Quote:
Originally Posted by KenS View Post

I finally got around to downloading that file and when I looked at the text file it indicated it was for a 680i bios instead of 650i and no indication if it was for BFG. Is this one OK to use?
The P5K1201.zip Rev posted just above us is the same file I ran across when looking for 1 for ya.
post #9720 of 12463
Quote:
Originally Posted by KenS View Post

I finally got around to downloading that file and when I looked at the text file it indicated it was for a 680i bios instead of 650i and no indication if it was for BFG. Is this one OK to use?

Ken. Where ya been mate?
This is a link to the site where I found it. They seem adamant it was for your board.
http://www.touslesdrivers.com/index.php?v_page=23&v_code=23308&v_langue=en
Alternatively you can flash the microcodes file that Besttt posted. He has more experience than myself in these matters.
Plan C. Aaron seems confident about inserting the microcodes into BIOS. Maybe he can help you out.
I may have to teach myself how to do this (Ihaven't needed to until now).
Besttt said you could flash this before or flashing other BIOS. Check with him.
microcodes.iso.zip 715k .zip file
Edited by Revhead - 6/7/16 at 4:04pm
     
CPUMotherboardGraphicsRAM
Xeon X5470 Gigabyte GA-EP45-UD3P Palit GTX 260 OCZ Reaper DDR2 1066 5-5-5-15 4x2GB 
Hard DriveHard DriveOptical DriveCooling
LITEONIT LCT-128M3S SAMSUNG HD502HJ ASUS DRW-24D5MT Zalman CNPS9900 Max 
CoolingOSMonitorPower
5 x 120mm Bitfenix Spectre Black  W7 Ultimate 64 bit ASUS VH222 Antec 650w Earthwatts 
CaseOther
DeepCool Tesseract BF Mid Tower Case USB 3.0 5GB/s 2 Port HUB 20 Pin Port PCi-E Addo... 
CPUMotherboardGraphicsRAM
Xeon E5450 Asus P5Q Gigabyte GTX 570 SOC OCZ DDR2 1066 Platinum 2 x 2GB 
RAMCoolingOSPower
Kingston HyperX 2 x 1GB DeepCool Gammaxx 400 W7 Ultimate 64 bit CoolerMaster Thunder 700W 
Case
Cooler Master Centurion 5 
CPUMotherboardGraphicsRAM
Intel Xeon L5430 Gigabyte GA-G41MT-D3 Integrated Intel Graphics Media Accelerator X45... 2 x 4GB Corsair XMS3 
CoolingOSCaseOther
ID-COOLING Denmark Series DK-03 Amahi Gigabyte GZM2 4 Port USB 3.0 PCI-E Card 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Xeon X5470 Gigabyte GA-EP45-UD3P Palit GTX 260 OCZ Reaper DDR2 1066 5-5-5-15 4x2GB 
Hard DriveHard DriveOptical DriveCooling
LITEONIT LCT-128M3S SAMSUNG HD502HJ ASUS DRW-24D5MT Zalman CNPS9900 Max 
CoolingOSMonitorPower
5 x 120mm Bitfenix Spectre Black  W7 Ultimate 64 bit ASUS VH222 Antec 650w Earthwatts 
CaseOther
DeepCool Tesseract BF Mid Tower Case USB 3.0 5GB/s 2 Port HUB 20 Pin Port PCi-E Addo... 
CPUMotherboardGraphicsRAM
Xeon E5450 Asus P5Q Gigabyte GTX 570 SOC OCZ DDR2 1066 Platinum 2 x 2GB 
RAMCoolingOSPower
Kingston HyperX 2 x 1GB DeepCool Gammaxx 400 W7 Ultimate 64 bit CoolerMaster Thunder 700W 
Case
Cooler Master Centurion 5 
CPUMotherboardGraphicsRAM
Intel Xeon L5430 Gigabyte GA-G41MT-D3 Integrated Intel Graphics Media Accelerator X45... 2 x 4GB Corsair XMS3 
CoolingOSCaseOther
ID-COOLING Denmark Series DK-03 Amahi Gigabyte GZM2 4 Port USB 3.0 PCI-E Card 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [MOD] LGA775 Support For LGA771 Xeon CPUs