Overclock.net › Forums › Intel › Intel CPUs › [MOD] LGA775 Support For LGA771 Xeon CPUs
New Posts  All Forums:Forum Nav:

[MOD] LGA775 Support For LGA771 Xeon CPUs - Page 983

post #9821 of 12432
This is my system now with X5470@4.5Ghz on P5Q3 Deluxe and 450Mhz fsb.
qygfsm.png
I have some problems going to 470 Mhz fsb and etc.
Can anyone share some info about bios settings because there is too many of them and I do not know what to set.
As far as I know the most important are GTL reference voltages going with quad cores.
post #9822 of 12432
Does an EP45-UD3R support the mod? A friend is selling for cheap. It is hard justifying 3 775 boards.
post #9823 of 12432
Quote:
Originally Posted by arnavvr View Post

Does an EP45-UD3R support the mod? A friend is selling for cheap. It is hard justifying 3 775 boards.
From another forum comparing the EP45-UD3R & UD3P boards(EP45-UD3P IS listed as supported by delidded) "Same chipset... same board > main difference UD3P has 2x pcie and raid. UD3R has raid only and 1x pcie."UD3P Also has 2 Lan. Best answer I can give ya. smile.gif
post #9824 of 12432
Quote:
Originally Posted by schuck6566 View Post

Quote:
Originally Posted by arnavvr View Post

Does an EP45-UD3R support the mod? A friend is selling for cheap. It is hard justifying 3 775 boards.
From another forum comparing the EP45-UD3R & UD3P boards(EP45-UD3P IS listed as supported by delidded) "Same chipset... same board > main difference UD3P has 2x pcie and raid. UD3R has raid only and 1x pcie."UD3P Also has 2 Lan. Best answer I can give ya. smile.gif
What he said. Supports the mod and one of the best S775 boards you can get. I have the UD3P.

Sent from my SM-G900I using Tapatalk
     
CPUMotherboardGraphicsRAM
Xeon X5470 Gigabyte GA-EP45-UD3P Palit GTX 260 OCZ Reaper DDR2 1066 5-5-5-15 4x2GB 
Hard DriveHard DriveOptical DriveCooling
LITEONIT LCT-128M3S SAMSUNG HD502HJ ASUS DRW-24D5MT Zalman CNPS9900 Max 
CoolingOSMonitorPower
5 x 120mm Bitfenix Spectre Black  W7 Ultimate 64 bit ASUS VH222 Antec 650w Earthwatts 
CaseOther
DeepCool Tesseract BF Mid Tower Case USB 3.0 5GB/s 2 Port HUB 20 Pin Port PCi-E Addo... 
CPUMotherboardGraphicsRAM
Xeon E5450 Asus P5Q Gigabyte GTX 570 SOC OCZ DDR2 1066 Platinum 2 x 2GB 
RAMCoolingOSPower
Kingston HyperX 2 x 1GB DeepCool Gammaxx 400 W7 Ultimate 64 bit CoolerMaster Thunder 700W 
Case
Cooler Master Centurion 5 
CPUMotherboardGraphicsRAM
Intel Xeon L5430 Gigabyte GA-G41MT-D3 Integrated Intel Graphics Media Accelerator X45... 2 x 4GB Corsair XMS3 
CoolingOSCaseOther
ID-COOLING Denmark Series DK-03 Amahi Gigabyte GZM2 4 Port USB 3.0 PCI-E Card 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Xeon X5470 Gigabyte GA-EP45-UD3P Palit GTX 260 OCZ Reaper DDR2 1066 5-5-5-15 4x2GB 
Hard DriveHard DriveOptical DriveCooling
LITEONIT LCT-128M3S SAMSUNG HD502HJ ASUS DRW-24D5MT Zalman CNPS9900 Max 
CoolingOSMonitorPower
5 x 120mm Bitfenix Spectre Black  W7 Ultimate 64 bit ASUS VH222 Antec 650w Earthwatts 
CaseOther
DeepCool Tesseract BF Mid Tower Case USB 3.0 5GB/s 2 Port HUB 20 Pin Port PCi-E Addo... 
CPUMotherboardGraphicsRAM
Xeon E5450 Asus P5Q Gigabyte GTX 570 SOC OCZ DDR2 1066 Platinum 2 x 2GB 
RAMCoolingOSPower
Kingston HyperX 2 x 1GB DeepCool Gammaxx 400 W7 Ultimate 64 bit CoolerMaster Thunder 700W 
Case
Cooler Master Centurion 5 
CPUMotherboardGraphicsRAM
Intel Xeon L5430 Gigabyte GA-G41MT-D3 Integrated Intel Graphics Media Accelerator X45... 2 x 4GB Corsair XMS3 
CoolingOSCaseOther
ID-COOLING Denmark Series DK-03 Amahi Gigabyte GZM2 4 Port USB 3.0 PCI-E Card 
  hide details  
Reply
post #9825 of 12432
Quote:
Originally Posted by schuck6566 View Post


Aren't some of those advanced timings really quite tight? My board defaults waaay looser? (this just might be my board being weird)

Survived the desert by the way biggrin.gif
Edited by Rich22 - 6/20/16 at 4:25pm
    
CPUMotherboardGraphicsRAM
E5450 Asus P5B Deluxe Wifi AP 9600GT 4 GB Buffalo Firestix 
Hard Drive
850 EVO SSD 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
E5450 Asus P5B Deluxe Wifi AP 9600GT 4 GB Buffalo Firestix 
Hard Drive
850 EVO SSD 
  hide details  
Reply
post #9826 of 12432
Quote:
Originally Posted by Rich22 View Post

Aren't some of those advanced timings really quite tight? My board defaults waaay looser? (this just might be my board being weird)

Survived the desert by the way biggrin.gif

Back from safari?
I agree. I gave him my thoughts a few posts back but he didn't reply. Difficult to offer any more advice without feedback . . .
     
CPUMotherboardGraphicsRAM
Xeon X5470 Gigabyte GA-EP45-UD3P Palit GTX 260 OCZ Reaper DDR2 1066 5-5-5-15 4x2GB 
Hard DriveHard DriveOptical DriveCooling
LITEONIT LCT-128M3S SAMSUNG HD502HJ ASUS DRW-24D5MT Zalman CNPS9900 Max 
CoolingOSMonitorPower
5 x 120mm Bitfenix Spectre Black  W7 Ultimate 64 bit ASUS VH222 Antec 650w Earthwatts 
CaseOther
DeepCool Tesseract BF Mid Tower Case USB 3.0 5GB/s 2 Port HUB 20 Pin Port PCi-E Addo... 
CPUMotherboardGraphicsRAM
Xeon E5450 Asus P5Q Gigabyte GTX 570 SOC OCZ DDR2 1066 Platinum 2 x 2GB 
RAMCoolingOSPower
Kingston HyperX 2 x 1GB DeepCool Gammaxx 400 W7 Ultimate 64 bit CoolerMaster Thunder 700W 
Case
Cooler Master Centurion 5 
CPUMotherboardGraphicsRAM
Intel Xeon L5430 Gigabyte GA-G41MT-D3 Integrated Intel Graphics Media Accelerator X45... 2 x 4GB Corsair XMS3 
CoolingOSCaseOther
ID-COOLING Denmark Series DK-03 Amahi Gigabyte GZM2 4 Port USB 3.0 PCI-E Card 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Xeon X5470 Gigabyte GA-EP45-UD3P Palit GTX 260 OCZ Reaper DDR2 1066 5-5-5-15 4x2GB 
Hard DriveHard DriveOptical DriveCooling
LITEONIT LCT-128M3S SAMSUNG HD502HJ ASUS DRW-24D5MT Zalman CNPS9900 Max 
CoolingOSMonitorPower
5 x 120mm Bitfenix Spectre Black  W7 Ultimate 64 bit ASUS VH222 Antec 650w Earthwatts 
CaseOther
DeepCool Tesseract BF Mid Tower Case USB 3.0 5GB/s 2 Port HUB 20 Pin Port PCi-E Addo... 
CPUMotherboardGraphicsRAM
Xeon E5450 Asus P5Q Gigabyte GTX 570 SOC OCZ DDR2 1066 Platinum 2 x 2GB 
RAMCoolingOSPower
Kingston HyperX 2 x 1GB DeepCool Gammaxx 400 W7 Ultimate 64 bit CoolerMaster Thunder 700W 
Case
Cooler Master Centurion 5 
CPUMotherboardGraphicsRAM
Intel Xeon L5430 Gigabyte GA-G41MT-D3 Integrated Intel Graphics Media Accelerator X45... 2 x 4GB Corsair XMS3 
CoolingOSCaseOther
ID-COOLING Denmark Series DK-03 Amahi Gigabyte GZM2 4 Port USB 3.0 PCI-E Card 
  hide details  
Reply
post #9827 of 12432
Quote:
Originally Posted by Rich22 View Post

Aren't some of those advanced timings really quite tight? My board defaults waaay looser? (this just might be my board being weird)

Survived the desert by the way biggrin.gif

Quote:
Originally Posted by Revhead View Post

Back from safari?
I agree. I gave him my thoughts a few posts back but he didn't reply. Difficult to offer any more advice without feedback . . .
Rich, Glad all is well! If we're talking the memory timings, they're the defaults for the sticks. redface.gif I'm basicly waiting 'till I get @ least 4Gig pref 8Gb of 1066 ram(this is the 800Mhz that's in it now.
Edited by schuck6566 - 6/20/16 at 7:24pm
post #9828 of 12432
You should still be able to boot at stock settings or for that matter at 4.0Ghz with ram at 1:1 and the settings I suggested?

Sent from my SM-G900I using Tapatalk
     
CPUMotherboardGraphicsRAM
Xeon X5470 Gigabyte GA-EP45-UD3P Palit GTX 260 OCZ Reaper DDR2 1066 5-5-5-15 4x2GB 
Hard DriveHard DriveOptical DriveCooling
LITEONIT LCT-128M3S SAMSUNG HD502HJ ASUS DRW-24D5MT Zalman CNPS9900 Max 
CoolingOSMonitorPower
5 x 120mm Bitfenix Spectre Black  W7 Ultimate 64 bit ASUS VH222 Antec 650w Earthwatts 
CaseOther
DeepCool Tesseract BF Mid Tower Case USB 3.0 5GB/s 2 Port HUB 20 Pin Port PCi-E Addo... 
CPUMotherboardGraphicsRAM
Xeon E5450 Asus P5Q Gigabyte GTX 570 SOC OCZ DDR2 1066 Platinum 2 x 2GB 
RAMCoolingOSPower
Kingston HyperX 2 x 1GB DeepCool Gammaxx 400 W7 Ultimate 64 bit CoolerMaster Thunder 700W 
Case
Cooler Master Centurion 5 
CPUMotherboardGraphicsRAM
Intel Xeon L5430 Gigabyte GA-G41MT-D3 Integrated Intel Graphics Media Accelerator X45... 2 x 4GB Corsair XMS3 
CoolingOSCaseOther
ID-COOLING Denmark Series DK-03 Amahi Gigabyte GZM2 4 Port USB 3.0 PCI-E Card 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Xeon X5470 Gigabyte GA-EP45-UD3P Palit GTX 260 OCZ Reaper DDR2 1066 5-5-5-15 4x2GB 
Hard DriveHard DriveOptical DriveCooling
LITEONIT LCT-128M3S SAMSUNG HD502HJ ASUS DRW-24D5MT Zalman CNPS9900 Max 
CoolingOSMonitorPower
5 x 120mm Bitfenix Spectre Black  W7 Ultimate 64 bit ASUS VH222 Antec 650w Earthwatts 
CaseOther
DeepCool Tesseract BF Mid Tower Case USB 3.0 5GB/s 2 Port HUB 20 Pin Port PCi-E Addo... 
CPUMotherboardGraphicsRAM
Xeon E5450 Asus P5Q Gigabyte GTX 570 SOC OCZ DDR2 1066 Platinum 2 x 2GB 
RAMCoolingOSPower
Kingston HyperX 2 x 1GB DeepCool Gammaxx 400 W7 Ultimate 64 bit CoolerMaster Thunder 700W 
Case
Cooler Master Centurion 5 
CPUMotherboardGraphicsRAM
Intel Xeon L5430 Gigabyte GA-G41MT-D3 Integrated Intel Graphics Media Accelerator X45... 2 x 4GB Corsair XMS3 
CoolingOSCaseOther
ID-COOLING Denmark Series DK-03 Amahi Gigabyte GZM2 4 Port USB 3.0 PCI-E Card 
  hide details  
Reply
post #9829 of 12432
Any idea what current the X5470 pulls under full load. My Cooler Master PSU is only 500 watts with 2 x 20A 12v rails and the GPU which pulls 182 watts needs 38A. I reckon I could be right on the limit which might be causing instability at higher clocks?
Edited by Revhead - 6/21/16 at 7:37am
     
CPUMotherboardGraphicsRAM
Xeon X5470 Gigabyte GA-EP45-UD3P Palit GTX 260 OCZ Reaper DDR2 1066 5-5-5-15 4x2GB 
Hard DriveHard DriveOptical DriveCooling
LITEONIT LCT-128M3S SAMSUNG HD502HJ ASUS DRW-24D5MT Zalman CNPS9900 Max 
CoolingOSMonitorPower
5 x 120mm Bitfenix Spectre Black  W7 Ultimate 64 bit ASUS VH222 Antec 650w Earthwatts 
CaseOther
DeepCool Tesseract BF Mid Tower Case USB 3.0 5GB/s 2 Port HUB 20 Pin Port PCi-E Addo... 
CPUMotherboardGraphicsRAM
Xeon E5450 Asus P5Q Gigabyte GTX 570 SOC OCZ DDR2 1066 Platinum 2 x 2GB 
RAMCoolingOSPower
Kingston HyperX 2 x 1GB DeepCool Gammaxx 400 W7 Ultimate 64 bit CoolerMaster Thunder 700W 
Case
Cooler Master Centurion 5 
CPUMotherboardGraphicsRAM
Intel Xeon L5430 Gigabyte GA-G41MT-D3 Integrated Intel Graphics Media Accelerator X45... 2 x 4GB Corsair XMS3 
CoolingOSCaseOther
ID-COOLING Denmark Series DK-03 Amahi Gigabyte GZM2 4 Port USB 3.0 PCI-E Card 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Xeon X5470 Gigabyte GA-EP45-UD3P Palit GTX 260 OCZ Reaper DDR2 1066 5-5-5-15 4x2GB 
Hard DriveHard DriveOptical DriveCooling
LITEONIT LCT-128M3S SAMSUNG HD502HJ ASUS DRW-24D5MT Zalman CNPS9900 Max 
CoolingOSMonitorPower
5 x 120mm Bitfenix Spectre Black  W7 Ultimate 64 bit ASUS VH222 Antec 650w Earthwatts 
CaseOther
DeepCool Tesseract BF Mid Tower Case USB 3.0 5GB/s 2 Port HUB 20 Pin Port PCi-E Addo... 
CPUMotherboardGraphicsRAM
Xeon E5450 Asus P5Q Gigabyte GTX 570 SOC OCZ DDR2 1066 Platinum 2 x 2GB 
RAMCoolingOSPower
Kingston HyperX 2 x 1GB DeepCool Gammaxx 400 W7 Ultimate 64 bit CoolerMaster Thunder 700W 
Case
Cooler Master Centurion 5 
CPUMotherboardGraphicsRAM
Intel Xeon L5430 Gigabyte GA-G41MT-D3 Integrated Intel Graphics Media Accelerator X45... 2 x 4GB Corsair XMS3 
CoolingOSCaseOther
ID-COOLING Denmark Series DK-03 Amahi Gigabyte GZM2 4 Port USB 3.0 PCI-E Card 
  hide details  
Reply
post #9830 of 12432
Quote:
Originally Posted by Revhead View Post

You should still be able to boot at stock settings or for that matter at 4.0Ghz with ram at 1:1 and the settings I suggested?

Sent from my SM-G900I using Tapatalk
It boots @ 4.0 no problem with the memory multiplier set to 2 (800 ram) problem is that no mater what voltage's I twiddle, @ least 1 core crashes in prime during the first or second test.. Tried cpu increases,ram increases,FSB increases,MCH increases,and various combos.I'll try the 4.0 again with a higher voltage real quick.(cpu was in mid 60's during test @ previous test voltages.)
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [MOD] LGA775 Support For LGA771 Xeon CPUs