Overclock.net › Forums › Intel › Intel CPUs › [MOD] LGA775 Support For LGA771 Xeon CPUs
New Posts  All Forums:Forum Nav:

[MOD] LGA775 Support For LGA771 Xeon CPUs - Page 991

post #9901 of 12504
Quote:
Originally Posted by Aaron_Henderson View Post

Or perhaps my E5430's were abused? tongue.gif
LOL, well, they're only 2.66gHz to begin with & the x5460 is a 3.1. Half a gig increase to start,so if overclocking both to say 3.5G, the 5460 would run cooller because less juice for the needed overclock.That would be offset SOME by the 5430 being 80 watt vs the 120, but you have the added volage for the overclocks.redface.gif
post #9902 of 12504
I've been getting a little frustrated trying to get my UD3P/X5470 stable at 4.5Ghz, so I thought I'd try a little experiment.
Set the multiplier to 6x and bumped the FSB up as far as 500, with most of the settings left at auto - to see what the board thought my settings should be?
Have also got some new ram to play with and a Silverstone 750 watt PSU on the way.
To go with the 4 x 2GB 1066 5-5-5-18 2.1-2.2v OCZ Reapers that I already have, I now have 2 x 2GB of Corsair XMS2 1066 5-5-5-15 2.1v ($A28) and 2 x 2GB of Team Xtreem Dark 1066 6-6-6-18 1.8-2.0v (also $A28). I was most excited about the Team stuff because of the lower voltage.
Check out the figures for CPU PLL and CPU Termination aka FSB @6x500! The rest of them weren't too extreme . . .

Edited by Revhead - 7/5/16 at 6:25am
     
CPUMotherboardGraphicsRAM
Xeon X5470 Gigabyte GA-EP45-UD3P Palit GTX 260 OCZ Reaper DDR2 1066 5-5-5-15 4x2GB 
Hard DriveHard DriveOptical DriveCooling
LITEONIT LCT-128M3S SAMSUNG HD502HJ ASUS DRW-24D5MT Zalman CNPS9900 Max 
CoolingOSMonitorPower
5 x 120mm Bitfenix Spectre Black  W7 Ultimate 64 bit ASUS VH222 Antec 650w Earthwatts 
CaseOther
DeepCool Tesseract BF Mid Tower Case USB 3.0 5GB/s 2 Port HUB 20 Pin Port PCi-E Addo... 
CPUMotherboardGraphicsRAM
Xeon E5450 Asus P5Q Gigabyte GTX 570 SOC OCZ DDR2 1066 Platinum 2 x 2GB 
RAMCoolingOSPower
Kingston HyperX 2 x 1GB DeepCool Gammaxx 400 W7 Ultimate 64 bit CoolerMaster Thunder 700W 
Case
Cooler Master Centurion 5 
CPUMotherboardGraphicsRAM
Intel Xeon L5430 Gigabyte GA-G41MT-D3 Integrated Intel Graphics Media Accelerator X45... 2 x 4GB Corsair XMS3 
CoolingOSCaseOther
ID-COOLING Denmark Series DK-03 Amahi Gigabyte GZM2 4 Port USB 3.0 PCI-E Card 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Xeon X5470 Gigabyte GA-EP45-UD3P Palit GTX 260 OCZ Reaper DDR2 1066 5-5-5-15 4x2GB 
Hard DriveHard DriveOptical DriveCooling
LITEONIT LCT-128M3S SAMSUNG HD502HJ ASUS DRW-24D5MT Zalman CNPS9900 Max 
CoolingOSMonitorPower
5 x 120mm Bitfenix Spectre Black  W7 Ultimate 64 bit ASUS VH222 Antec 650w Earthwatts 
CaseOther
DeepCool Tesseract BF Mid Tower Case USB 3.0 5GB/s 2 Port HUB 20 Pin Port PCi-E Addo... 
CPUMotherboardGraphicsRAM
Xeon E5450 Asus P5Q Gigabyte GTX 570 SOC OCZ DDR2 1066 Platinum 2 x 2GB 
RAMCoolingOSPower
Kingston HyperX 2 x 1GB DeepCool Gammaxx 400 W7 Ultimate 64 bit CoolerMaster Thunder 700W 
Case
Cooler Master Centurion 5 
CPUMotherboardGraphicsRAM
Intel Xeon L5430 Gigabyte GA-G41MT-D3 Integrated Intel Graphics Media Accelerator X45... 2 x 4GB Corsair XMS3 
CoolingOSCaseOther
ID-COOLING Denmark Series DK-03 Amahi Gigabyte GZM2 4 Port USB 3.0 PCI-E Card 
  hide details  
Reply
post #9903 of 12504
Quote:
Originally Posted by Rich22 View Post

You really do. I bought one for my sister's laptop yesterday, it was only £25....

Your memory mark looks 10% or more higher than before- new ram? Not been following the thread much this past week...
another 6% higher, bumped cpu up to 3.91GHZ stable and added 60MHz to base GPU clock speed(1250 instead of 1190) LOL, every little bit helps 'till I get a decent HDD.thumb.gif
post #9904 of 12504
Quote:
Originally Posted by Revhead View Post

I've been getting a little frustrated trying to get my UD3P/X5470 stable at 4.5Ghz, so I thought I'd try a little experiment.
Set the multiplier to 6x and bumped the FSB up as far as 500, with most of the settings left at auto - to see what the board thought my settings should be?
Have also got some new ram to play with and a Silverstone 750 watt PSU on the way.
To go with the 4 x 2GB 1066 5-5-5-18 2.1-2.2v OCZ Reapers that I already have, I now have 2 x 2GB of Corsair XMS2 1066 5-5-5-15 2.1v ($A28) and 2 x 2GB of Team Xtreem Dark 1066 6-6-6-18 1.8-2.0v (also $A28). I was most excited about the Team stuff because of the lower voltage.
Check out the figures for CPU PLL and CPU Termination aka FSB @6x500! The rest of them weren't too extreme . . .
WOW, the 1.4375 voltage is what I had to run to have MY x5470 stable @ 3.63 on my EP35-DS3R.I even believe I'm past that here with the e5450 running @ 3.91 stable. rolleyes.gif
post #9905 of 12504
Quote:
Originally Posted by schuck6566 View Post

WOW, the 1.4375 voltage is what I had to run to have MY x5470 stable @ 3.63 on my EP35-DS3R.I even believe I'm past that here with the e5450 running @ 3.91 stable. rolleyes.gif

its probably the board tbh. I had a p35 board that took some serious voltage to run the same clocks that it did on a p43 chipset same chip.. It was actually a p35 ds3r and it gave out. Rmad it and they gave me a p43 ud3-l and it did way better. Try to get a p45 chipset board for it.
fx8350
(6 items)
 
x58 fun
(7 items)
 
 
CPUMotherboardGraphicsRAM
fx8350 @ 4.7 1.38 asus m5a97 r2.0 le modded with vrm heatsinks GTX 480 X2 @ 900/2000 depends on my mood ;) 
Hard DriveCooling
some off brand ssd  custom loop 
CPUMotherboardGraphicsRAM
w3520@ 4.5 p6t deluxe v2 6970 x2 @ 950 depends on my mood ;) 
Hard DriveOptical DriveCooling
ssd who uses these? custom loop 
  hide details  
Reply
fx8350
(6 items)
 
x58 fun
(7 items)
 
 
CPUMotherboardGraphicsRAM
fx8350 @ 4.7 1.38 asus m5a97 r2.0 le modded with vrm heatsinks GTX 480 X2 @ 900/2000 depends on my mood ;) 
Hard DriveCooling
some off brand ssd  custom loop 
CPUMotherboardGraphicsRAM
w3520@ 4.5 p6t deluxe v2 6970 x2 @ 950 depends on my mood ;) 
Hard DriveOptical DriveCooling
ssd who uses these? custom loop 
  hide details  
Reply
post #9906 of 12504
hello again guys. my x5460 is goin to arrive in 2-3 days.
i have a question. how well does a cheap cooler perform on a x5460? i was goin to buy a cpu cooler to overclock but now i am thinking about getting a better psu, because the one i have right now is just on the limit. i am using a zalman cnps90 cooler, which is fine for my current pc. on stock speeds with a g0 q6600 i saw a max temp of 58degrees(C) under load.
you think it can handle a stock speed x5460(E0) ?
i will be getting a good aircooler or a cheap AIO liquid cooler in a week or two. you think i will be fine until then?

edit: this is what i get on a psu calculator . my psu is a thermaltake tr2 550watt with 29amps.
i can either get a thermaltake toughpower 700watt(4x18amps) or a corsair h60 for the same money. i can afford one of those at this time. what do u guys think?
Edited by Goustoulos - 7/7/16 at 12:10am
post #9907 of 12504
Quote:
Originally Posted by schuck6566 View Post

WOW, the 1.4375 voltage is what I had to run to have MY x5470 stable @ 3.63 on my EP35-DS3R.I even believe I'm past that here with the e5450 running @ 3.91 stable. rolleyes.gif

its probably the board tbh. I had a p35 board that took some serious voltage to run the same clocks that it did on a p43 chipset same chip.. It was actually a p35 ds3r and it gave out. Rmad it and they gave me a p43 ud3-l and it did way better
Quote:
Originally Posted by Goustoulos View Post

hello again guys. my x5460 is goin to arrive in 2-3 days.
i have a question. how well does a cheap cooler perform on a x5460? i was goin to buy a cpu cooler to overclock but now i am thinking about getting a better psu, because the one i have right now is just on the limit. i am using a zalman cnps90 cooler, which is fine for my current pc. on stock speeds with a g0 q6600 i saw a max temp of 58degrees(C) under load.
you think it can handle a stock speed x5460(E0) ?
i will be getting a good aircooler or a cheap AIO liquid cooler in a week or two. you think i will be fine until then?

edit: this is what i get on a psu calculator . my psu is a thermaltake tr2 550watt with 29amps.
i can either get a thermaltake toughpower 700watt(4x18amps) or a corsair h60 for the same money. i can afford one of those at this time. what do u guys think?

what gpu are you gonna run on it? And honestly it can handle stock on it thats about it.
fx8350
(6 items)
 
x58 fun
(7 items)
 
 
CPUMotherboardGraphicsRAM
fx8350 @ 4.7 1.38 asus m5a97 r2.0 le modded with vrm heatsinks GTX 480 X2 @ 900/2000 depends on my mood ;) 
Hard DriveCooling
some off brand ssd  custom loop 
CPUMotherboardGraphicsRAM
w3520@ 4.5 p6t deluxe v2 6970 x2 @ 950 depends on my mood ;) 
Hard DriveOptical DriveCooling
ssd who uses these? custom loop 
  hide details  
Reply
fx8350
(6 items)
 
x58 fun
(7 items)
 
 
CPUMotherboardGraphicsRAM
fx8350 @ 4.7 1.38 asus m5a97 r2.0 le modded with vrm heatsinks GTX 480 X2 @ 900/2000 depends on my mood ;) 
Hard DriveCooling
some off brand ssd  custom loop 
CPUMotherboardGraphicsRAM
w3520@ 4.5 p6t deluxe v2 6970 x2 @ 950 depends on my mood ;) 
Hard DriveOptical DriveCooling
ssd who uses these? custom loop 
  hide details  
Reply
post #9908 of 12504
thanks for the reply man. its all on the link i posted, so i didnt post it here too.
i m gonna run a x5460(will overclock when i get a proper cooler), with a p5q deluxe, 4 gigs of ram, a factory oced 5870, 3 hdds, 1 ssd and 3 fans.
according to that psu calculator i have no problem in watts, but i am just on the limit on 12v amperes. my psu has 29A, and i need 29A.
ok thanks. so my cooler can handle it on stock, so i will go for the toughpower 700watt, and in about 1 or 2 weeks i ll get a used h60.
post #9909 of 12504
Quote:
Originally Posted by Goustoulos View Post

thanks for the reply man. its all on the link i posted, so i didnt post it here too.
i m gonna run a x5460(will overclock when i get a proper cooler), with a p5q deluxe, 4 gigs of ram, a factory oced 5870, 3 hdds, 1 ssd and 3 fans.
according to that psu calculator i have no problem in watts, but i am just on the limit on 12v amperes. my psu has 29A, and i need 29A.
ok thanks. so my cooler can handle it on stock, so i will go for the toughpower 700watt, and in about 1 or 2 weeks i ll get a used h60.



Honestly I'm running a Gtx 480 over clocked full water loop and a over clocked fx8350 a ssd three 7200 rpm hdds 2 deltas and 3 more random 120mm fanson a 650 watt rose will. That tough power could run dual 5870s
Edited by seanzylol - 7/7/16 at 9:17am
fx8350
(6 items)
 
x58 fun
(7 items)
 
 
CPUMotherboardGraphicsRAM
fx8350 @ 4.7 1.38 asus m5a97 r2.0 le modded with vrm heatsinks GTX 480 X2 @ 900/2000 depends on my mood ;) 
Hard DriveCooling
some off brand ssd  custom loop 
CPUMotherboardGraphicsRAM
w3520@ 4.5 p6t deluxe v2 6970 x2 @ 950 depends on my mood ;) 
Hard DriveOptical DriveCooling
ssd who uses these? custom loop 
  hide details  
Reply
fx8350
(6 items)
 
x58 fun
(7 items)
 
 
CPUMotherboardGraphicsRAM
fx8350 @ 4.7 1.38 asus m5a97 r2.0 le modded with vrm heatsinks GTX 480 X2 @ 900/2000 depends on my mood ;) 
Hard DriveCooling
some off brand ssd  custom loop 
CPUMotherboardGraphicsRAM
w3520@ 4.5 p6t deluxe v2 6970 x2 @ 950 depends on my mood ;) 
Hard DriveOptical DriveCooling
ssd who uses these? custom loop 
  hide details  
Reply
post #9910 of 12504
Quote:
Originally Posted by Goustoulos View Post

...how well does a cheap cooler perform on a x5460?...
...my psu is a thermaltake tr2 550watt with 29amps...
... i am just on the limit on 12v amperes. my psu has 29A, and i need 29A...
... in about 1 or 2 weeks i ll get a used h60...

Hey there,

You can can see some numbers of my X5460 / P5Q3 / 4GB setup (so almost identical to what yours will be), although with a Big Typhoon heatsink, in this thread, post No5889.

Also drawing 500W from a 500W PSU, even a well-made one and brand new, is a bad idea. If you know for a fact that you will be really pulling power close to the max rated one of your PSU, its best to upgrade.

Also watch out on those AIO's, a pump have only so much life to give and if you are not planning to really push the CPU hard and/or 24/7, IMHO its best to go for the aircooling. My chunk of metal from 2009 is still alive and kicking just fine, will a AIO last the same amount of time?
Still only my opinion ofc, and if you are planning to have an almost 10 year old CPU running over-volted and @60-70c for long periods, then maybe its best to go for water and maybe keep it 10c cooler if you can...

Thanks my non-expert 5cents smile.gif

Καλή τύχη!
Edited by JohnnyG01 - 7/7/16 at 2:02pm
Thy Old Lady
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon X5460 Asus P5Q3 (P45/ICH10R) Sapphire R9 270X Dual-X 2GB OC Crucial Ballistix Sport 8GB Kit 
Hard DriveHard DriveCoolingCooling
Kingston SSDNow 40GB Westrn Digital WD20PURX Purple 2TB Thermaltake Big Typhoon (GPU) Raijintek Themis (CPU) 
OSMonitorPowerCase
Windows 7 Ultimate x64 LG Flatron IPS235 Corsair TX750W Coolermaser Elite 332 
Other
Cat 
  hide details  
Reply
Thy Old Lady
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon X5460 Asus P5Q3 (P45/ICH10R) Sapphire R9 270X Dual-X 2GB OC Crucial Ballistix Sport 8GB Kit 
Hard DriveHard DriveCoolingCooling
Kingston SSDNow 40GB Westrn Digital WD20PURX Purple 2TB Thermaltake Big Typhoon (GPU) Raijintek Themis (CPU) 
OSMonitorPowerCase
Windows 7 Ultimate x64 LG Flatron IPS235 Corsair TX750W Coolermaser Elite 332 
Other
Cat 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [MOD] LGA775 Support For LGA771 Xeon CPUs