The fixed BIOS attached.
Pls. try to flash the BIOS by following steps.
Please make sure you update it in pure DOS mode, here you can see
information about how to create USB Pendisk boot DOS,
1. Extract BIOS file and utility to hard disk or USB Pen disk. Here is an
example of using USB Pen disk.
2. Restart your PC in MS-DOS mode.
3. In DOS prompt, change directory to your BIOS location, for example,
C:\>fixed\ 4. Type "atiflash.exe -ai", this is to check your VGA card
adapter location. If you have only one adapter, the adapter should be at
Type "atiflash -s 0 back.bin" to save your original BIOS.
(backup.bat) This can help you keep original BIOS.
Then type "atiflash -p 0 F3401LAA.ROM -f" to update VGA BIOS. "-p"
is to program, "-f" is to program forcibly. (update.bat) 5. Restart PC to
finish when you see "Restart System To Complete VBIOS Update" message.
If you still have same problems, after you done the procedure above, I think
it is better way to do RMA service.
One more thing, please do not release the BIOS attached to the public.
Flashing the BIOS may result the damage to the card.
PR and Marketing Consultant