Here is a little mini build I did with the DIY PC V3Plus.
i3 3220 w/ intel cooler
Asrock H77 mini itx
EVGA 650 ti 2GB SSC
2 120GB SSDs
1 500GB 7200HDD
Corsair 430w builders Series
Operating system: Dual Boot Win8 and Crunchbang Linux
It got a little banged up during transit but it was easy to bend back in place. I was originally going to try to cram that 190mm NZXT fan but it would not fit without some major shaving
I settled for a 120 Scythe I had laying around to push air up from the bottom. The mechanical hard drive is secured with velcro that I have never had unstick...we'll see on this one.
SSDs are going to be stuffed where they fit
PSU goes in last. You will really need to plan your basic routing of the SATA / Control Panel / HD Audio / USB 3 and 2 cables before you try to mount the PSU. Cause it's tight when you start adding fans and extra hard drives.
All done and looking pretty. Not bad for $45
Word to the wise. This is not a gaming case and it gets hot. I'm up to 60c on the i3 with around 72c on the 650ti and it's cold in the house in Texas tonight. In the summer I would not be surprised to see this around 65 on the i3 and around 80-85c on the GPU.
Please let me know if yall have any questions about the V3Plus.