Originally Posted by lacrossewacker
Originally Posted by insomniac42
i noticed my gpu is not @100% more like 65%
The 990x is a 12 threaded cpu. Set the cpu slot to use 11 threads.
Don't do that, you should avoid running FAH with an odd number of threads above 3. Some units will insta-fail, sending you into a loop and eventually it will pause for 24h.
Apart from that, you'd be lucky to see 50k PPD in Windows.
FahControl is often terrible in PPD estimates, check out HFM to get a better prediction: http://code.google.com/p/hfm-net/
The 6950 is most likely running _16 units which hogs a CPU-thread for itself hence the lower than possible PPD. They are a pretty sensitive to which drivers you use, some will not put a 90+% load on them. Last I used my 6970 I had 13.5 I believe, produced 17k PPD on stock clocks running dedicated.
Also, I would suggest running advanced
instead of beta