post #1 of 1
Thread Starter 
Hi Guys,

At about my wits end on this one. Been updating/rolling back drivers, trying different ports, tweaking settings and pulling my hair out.The issue is that my second monitor (Actually a projector, A Sanyo PLV70) which is supposed to be running at 1366 x 768 will only go up to 1280 x 1024, and even having the audacity to recommend 1024 x 768.

  • Main screen is a Qnix 27" inch 1440p display, via dual link DVI.
  • Second screen is on an active display port to VGA. Running through a mini display port to display port.
  • Both of these screens are hooked up to a 6950 2GB running the September 18th drivers.

I'm guessing that this is an issue with EDID, even though when I change the resolution manually on the monitor to 1366x768, it wont let me increase it on windows, and when either turns off, it sets it back to the 1024 x 768.

Any ideas as to what could be causing this issue will be rewarded with + Rep and a very appreciative thanks.