Overclock.net › Forums › Hardware Vendors › Case Labs › " CHEECH" Build log Case Labs Mercury S5 with Pedistal
New Posts  All Forums:Forum Nav:

" CHEECH" Build log Case Labs Mercury S5 with Pedistal

post #1 of 2
Thread Starter 
Hardware For "Cheech" (Mercury S5 with Pedestal)
Gigabyte G1 Sniper M5 Motherboard
Memory G.Skill Ares DDR3
Intel I5 ( probably add a I7 4770K) soon
Intel 520 SSD
Western Digital WD Red 3TB WD30EFRX
Himuros Hard drive cover
Corsair AX860 Platinum Power Supply
Corsair Gen2 Green Sleeved Modular Cable Kit ( cheated gave then a hair Cut shortened the PSU end)

XSPC RayStorm CPU Waterblock
XSPC Razor GTX670 Waterblock

Alphacool NexXxoS UT60 Full Copper 360mm ( in the pedestal)
Alphacool NexXxoS UT60 Full Copper 240mm ( in the Pedestal)
Koolance Copper Core CU1402V High Flow 2x140mm ( Top Radiator in the S5 Case)
Noiseblocker NB-eLoop B12-3 120mmLamptron FC Touch Fan Controller
Noiseblocker NB-BlackSilentPRO PK-2 140mm
Alphacool Repack Dual Laing D5 - Dual 5.25 Bay ( wanted to use this and tried it in the pedestal it fited along with the alpha cool 240 Rad but had to move the Radiator back on the radiator mount to do it and roughly mounted it there and ran the D5 with the alpha cool res but found it noisy and cramped for room in the pedestal removed it)
Swiftech MCP35X Pump
EK Pump top and res tube also added a EK 200 res tube
XSPC Photon 270 Tube Reservoir
PrimoChill Rigid Acrylic Tubing 24in Clear ( Wish it came in longer lengths not in Australia though )
PrimoChill Rigid Ghost Compression Anodized Green
Alphacool G1/4 F-F Extender Black
Alphacool G1/4 M-M Adapter Black
Bitspower Matte Black G1/4 Extender 15MM
Alphacool Bulkhead Connector G1/4 Black
Bitspower G1/4 Matte Black L-Block

]g around doing nothing so I modded it to suit a Gainward GTX 760 Phantom where the DVI dual plugs are the back of the Acrilic on XSPC Razor block I used a 4 inch angle grinder with a flapper wheel to take enough off some acrylic so it fits thumb.gif I and slightly modded the support bracket for the Daul DVI on inside on the Gainward to fit and works fine)
Gainward GTX760 Phantom product code was 426018336-2999 if any one want to know

Edited by HG02 - 10/21/13 at 12:49pm
post #2 of 2
Thread Starter 
Heres Chongs Smaller Brother Cheech
The pump mounting bracket will be fitted with a thermal pad and painted The Himuro hard drive bracket will cover the original rectangular hole that standard in the mercury S3 made a USB power switch cable cover out of Aluminum so all the top wiring can be hidden which I intend to do with all of the wiring

Previously I had the pump fitted side ways and made a aluminum heat sink and cover but felt it looked a little plain the plate was mounted on the pump not the case So I have changed it Just waiting for my Aqua computer DDC pump top , Flow meter and Aquareo 6 to arrive but Ill keep doing the sleeving
made two differnt styles of PSU loom clean and sleeved turned the Sliverstone Decal

Edited by HG02 - 12/1/13 at 11:40pm
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Labs
Overclock.net › Forums › Hardware Vendors › Case Labs › " CHEECH" Build log Case Labs Mercury S5 with Pedistal