Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › [Build Log] TRiCLOPS (HAF-XB, RIVE BE, LIQUID!!!!) (BACK-2-BLAHH)
New Posts  All Forums:Forum Nav:

[Build Log] TRiCLOPS (HAF-XB, RIVE BE, LIQUID!!!!) (BACK-2-BLAHH) - Page 102

Poll Results: Should i plan a built-in "extra" monitor ~9-13" modded into a transparent window or built in speakers?

 
  • 85% (83)
    Monitor
  • 14% (14)
    Speakers
97 Total Votes  
post #1011 of 3109
Anybody you know near your area that can maybe let you borrow their GPU? I'd say buy one locally and then just return it for a refund when done with the troubleshooting, but that's not how I roll.

It's just another one of those days when I wish I had the power/ability to teleport to wherever the hell I wish. If only I could drop by and swap my 7950 with your 290X, I'd do it without ever thinking twice.
Cherry Bomber
(8 items)
 
  
CPUMotherboardGraphicsRAM
FX-8350 ASUS 990fx r2.0 Sapphire 7950 FLEX with Boost G-Skill Ripjaws 8GB 1866MHz 
OSPowerCaseMouse Pad
Windows 7 Ultimate 64-bit SeaSonic M12II 750 SS-750AM Silverstone RV02 Razer Goliathus [Speed Edition | L] 
  hide details  
Reply
Cherry Bomber
(8 items)
 
  
CPUMotherboardGraphicsRAM
FX-8350 ASUS 990fx r2.0 Sapphire 7950 FLEX with Boost G-Skill Ripjaws 8GB 1866MHz 
OSPowerCaseMouse Pad
Windows 7 Ultimate 64-bit SeaSonic M12II 750 SS-750AM Silverstone RV02 Razer Goliathus [Speed Edition | L] 
  hide details  
Reply
post #1012 of 3109
remember as long as your not having a jelly fish bad day it is not that bad!!!

True Story!!!!



Hi Sue,

Just another note from your bottom-dwelling brother.
Last week I had a bad day at the office. I know you've been feeling down
lately at work, so I thought I would share my dilemma with you to make you
realize it's not so bad after all. Before I can tell you what happened to
me, I first must bore you with a few technicalities of my job. As you know,
my office lies at the bottom of the sea. I wear a suit to the office. It's a
wet suit. This time of year the water is quite cool. So what we do to keep
warm is this: We have a diesel powered industrial water heater. This $20,000
piece of equipment sucks the water out of the sea. It heats it to a
delightful temperature. It then pumps it down to the diver through a garden
hose, which is taped to the air hose.

Now this sounds like a darn good plan, and I've used it several times with
no complaints. What I do, when I get to the bottom and start working, is
take the hose and stuff it down the back of my wet suit.

This floods my whole suit with warm water. It's like working in a
Jacuzzi. Everything
was going well until all of a sudden, my butt started to itch. So, of
course, I scratched it.

This only made things worse. Within a few seconds my ass started to burn. I
pulled the hose out from my back, but the damage was done. In agony I
realized what had happened. The hot water machine had sucked up a jellyfish
and pumped it into my suit. Now, since I don't have any hair on my back, the
jellyfish couldn't stick to it, however, the crack of my ass was not as
fortunate.
When I scratched what I thought was an itch, I was actually grinding the
jellyfish into the crack of my ass.

I informed the dive supervisor of my dilemma over the communicator. His
instructions were unclear due to the fact that he, along with five other
divers, were all laughing hysterically. Needless to say, I aborted the
dive..

I was instructed to make three agonizing in-water decompression stops
totaling thirty-five minutes before I could reach the surface to begin my
chamber dry decompression. When I arrived at the surface, I was wearing
nothing but my brass helmet. As I climbed out of the water, the medic,
with tears of laughter running down his face, handed me a tube of cream and
told me to rub it on my butt as soon as I got in the chamber. The cream put
the fire out, but I couldn't **** for two days
because my ass was swollen shut.

So, next time you're having a bad day at work, think about how much worse it
would be if you had a jellyfish shoved up your ass. Now repeat to yourself,
'I love my job, I love my job, I love my job.'
Whenever you have a bad day, ask yourself, is this a jellyfish bad day?

May you NEVER have a jellyfish bad day! !!!!
post #1013 of 3109
Thread Starter 
Quote:
Originally Posted by seross69 View Post

calm down and take a break, I know it is frustrating and easier said than done but we have all been there and it has always been something simple for me never have to RMA anything!!! just be patient think and think some more.

 

Yeah, i actually need to swing by my moms house and feed her dog. I'm supposed to be staying there the next few days but i can't picture being there right now without all my stuff, i'd just be obsessing. I just tried without the io shield and still no luck.

 

I'm gonna go feed my moms dog and come back. Give me some time to cool off.

Quote:
Originally Posted by GaMbi2004 View Post

Need a hug? helpinghand.gif
34 and "boot-device_LED" ?
Do you still have the 775? dont you have a GPU in that you can try? im guessing you sold it or threw it away smile.gif

 

I NEED A VICTIM!!!!!

Lol, jk. I really do feel like hitting something though

I have the board but no gpu for it. I used to be a console gamer back then and slowly phased out to gaming on my laptop. Then decided on building a portable rig in a magical little case called the HAF XB instead :p

I don't remember if there was an LED lit up without the GPU. I'll try that again when i get back home. Not sure if the 290x will work on the LGA775 Intel board, but that might be something else to test too. I think i'd have to do a full OS install though =\

 

Ughhh this sucks.

Thanks everybody for your input and help. I really appreciate it and hopefully this can be worked out without an RMA.

 

Anyway, i'll be back in like 45 minutes or so.

    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
post #1014 of 3109
Quote:
Originally Posted by seross69 View Post

remember as long as your not having a jelly fish bad day it is not that bad!!! Warning: Spoiler! (Click to show)
True Story!!!!



Hi Sue,

Just another note from your bottom-dwelling brother.
Last week I had a bad day at the office. I know you've been feeling down
lately at work, so I thought I would share my dilemma with you to make you
realize it's not so bad after all. Before I can tell you what happened to
me, I first must bore you with a few technicalities of my job. As you know,
my office lies at the bottom of the sea. I wear a suit to the office. It's a
wet suit. This time of year the water is quite cool. So what we do to keep
warm is this: We have a diesel powered industrial water heater. This $20,000
piece of equipment sucks the water out of the sea. It heats it to a
delightful temperature. It then pumps it down to the diver through a garden
hose, which is taped to the air hose.

Now this sounds like a darn good plan, and I've used it several times with
no complaints. What I do, when I get to the bottom and start working, is
take the hose and stuff it down the back of my wet suit.

This floods my whole suit with warm water. It's like working in a
Jacuzzi. Everything
was going well until all of a sudden, my butt started to itch. So, of
course, I scratched it.

This only made things worse. Within a few seconds my ass started to burn. I
pulled the hose out from my back, but the damage was done. In agony I
realized what had happened. The hot water machine had sucked up a jellyfish
and pumped it into my suit. Now, since I don't have any hair on my back, the
jellyfish couldn't stick to it, however, the crack of my ass was not as
fortunate.
When I scratched what I thought was an itch, I was actually grinding the
jellyfish into the crack of my ass.

I informed the dive supervisor of my dilemma over the communicator. His
instructions were unclear due to the fact that he, along with five other
divers, were all laughing hysterically. Needless to say, I aborted the
dive..

I was instructed to make three agonizing in-water decompression stops
totaling thirty-five minutes before I could reach the surface to begin my
chamber dry decompression. When I arrived at the surface, I was wearing
nothing but my brass helmet. As I climbed out of the water, the medic,
with tears of laughter running down his face, handed me a tube of cream and
told me to rub it on my butt as soon as I got in the chamber. The cream put
the fire out, but I couldn't **** for two days
because my ass was swollen shut.

So, next time you're having a bad day at work, think about how much worse it
would be if you had a jellyfish shoved up your ass. Now repeat to yourself,
'I love my job, I love my job, I love my job.'
Whenever you have a bad day, ask yourself, is this a jellyfish bad day?

May you NEVER have a jellyfish bad day! !!!!
Rofl

So true smile.gif and a good attempt to calm him down tongue.gif
...

This is a longshot, but if you switch the PCIe lanes off, that "VGA_LED" will come on.. try switching it off and on while the system is running, see if the led turns off.
and did you check the LN2 mode? dont remember reading about it.. LN2 off and try with and without the 4pin
another idea. Have you connected the 4 pin molex on the bottom of the board? it is unlikely it will help.. but since we have tried everything else, why not tongue.gif
and a question.. is PC speaker installed? any beeping?
 
My Old Machine
(8 items)
 
 
CPUMotherboardGraphicsRAM
Haswell i5 4670K @ 4.6GHz MSI Z87-GD65 Gamer EVGA GTX780 SC ACX + XSPC Razor Corsair Dominator 2 x 8 GB 1866 MHz CL9 1.5V 
Hard DriveHard DriveCoolingOS
Samsung 830 Series 120 GB Samsung 840Pro Series 256 GB Custom Loop (See Build Log) Win7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung Syncmaster P2350 Logitech G710+ Corsair AX760 CoolerMaster HAF XB 
MouseMouse Pad
Logitech G5 Func 1030XL 
CPUMotherboardGraphicsRAM
Q6600 Core 2 Quad 65nm MSI P35 Platinum XFX GTX275 Core Edition OcZ Dual ch PC6400 4GB kit 
Hard DriveOSPower
1TB Sata 2 Windows 7, Ultimate - 64 bit TT Toughpower 750W 
  hide details  
Reply
 
My Old Machine
(8 items)
 
 
CPUMotherboardGraphicsRAM
Haswell i5 4670K @ 4.6GHz MSI Z87-GD65 Gamer EVGA GTX780 SC ACX + XSPC Razor Corsair Dominator 2 x 8 GB 1866 MHz CL9 1.5V 
Hard DriveHard DriveCoolingOS
Samsung 830 Series 120 GB Samsung 840Pro Series 256 GB Custom Loop (See Build Log) Win7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung Syncmaster P2350 Logitech G710+ Corsair AX760 CoolerMaster HAF XB 
MouseMouse Pad
Logitech G5 Func 1030XL 
CPUMotherboardGraphicsRAM
Q6600 Core 2 Quad 65nm MSI P35 Platinum XFX GTX275 Core Edition OcZ Dual ch PC6400 4GB kit 
Hard DriveOSPower
1TB Sata 2 Windows 7, Ultimate - 64 bit TT Toughpower 750W 
  hide details  
Reply
post #1015 of 3109
Thread Starter 
Quote:
Originally Posted by seross69 View Post

remember as long as your not having a jelly fish bad day it is not that bad!!!
  Warning: Spoiler! (Click to show)
True Story!!!!



Hi Sue,

Just another note from your bottom-dwelling brother.
Last week I had a bad day at the office. I know you've been feeling down
lately at work, so I thought I would share my dilemma with you to make you
realize it's not so bad after all. Before I can tell you what happened to
me, I first must bore you with a few technicalities of my job. As you know,
my office lies at the bottom of the sea. I wear a suit to the office. It's a
wet suit. This time of year the water is quite cool. So what we do to keep
warm is this: We have a diesel powered industrial water heater. This $20,000
piece of equipment sucks the water out of the sea. It heats it to a
delightful temperature. It then pumps it down to the diver through a garden
hose, which is taped to the air hose.

Now this sounds like a darn good plan, and I've used it several times with
no complaints. What I do, when I get to the bottom and start working, is
take the hose and stuff it down the back of my wet suit.

This floods my whole suit with warm water. It's like working in a
Jacuzzi. Everything
was going well until all of a sudden, my butt started to itch. So, of
course, I scratched it.

This only made things worse. Within a few seconds my ass started to burn. I
pulled the hose out from my back, but the damage was done. In agony I
realized what had happened. The hot water machine had sucked up a jellyfish
and pumped it into my suit. Now, since I don't have any hair on my back, the
jellyfish couldn't stick to it, however, the crack of my ass was not as
fortunate.
When I scratched what I thought was an itch, I was actually grinding the
jellyfish into the crack of my ass.

I informed the dive supervisor of my dilemma over the communicator. His
instructions were unclear due to the fact that he, along with five other
divers, were all laughing hysterically. Needless to say, I aborted the
dive..

I was instructed to make three agonizing in-water decompression stops
totaling thirty-five minutes before I could reach the surface to begin my
chamber dry decompression. When I arrived at the surface, I was wearing
nothing but my brass helmet. As I climbed out of the water, the medic,
with tears of laughter running down his face, handed me a tube of cream and
told me to rub it on my butt as soon as I got in the chamber. The cream put
the fire out, but I couldn't **** for two days
because my ass was swollen shut.

So, next time you're having a bad day at work, think about how much worse it
would be if you had a jellyfish shoved up your ass. Now repeat to yourself,
'I love my job, I love my job, I love my job.'
Whenever you have a bad day, ask yourself, is this a jellyfish bad day?

May you NEVER have a jellyfish bad day! !!!!

 

Brotha, i didn't bother reading that til i got back just now because i didn't think it would be possible to cheer me up anyway. I was eating half a calzone and spit food at my laptop i was laughing so hard!!! :lachen:

Quote:
Originally Posted by GaMbi2004 View Post
 
 
Warning: Spoiler! (Click to show)
Quote:
Originally Posted by seross69 View Post

remember as long as your not having a jelly fish bad day it is not that bad!!! Warning: Spoiler! (Click to show)
True Story!!!!



Hi Sue,

Just another note from your bottom-dwelling brother.
Last week I had a bad day at the office. I know you've been feeling down
lately at work, so I thought I would share my dilemma with you to make you
realize it's not so bad after all. Before I can tell you what happened to
me, I first must bore you with a few technicalities of my job. As you know,
my office lies at the bottom of the sea. I wear a suit to the office. It's a
wet suit. This time of year the water is quite cool. So what we do to keep
warm is this: We have a diesel powered industrial water heater. This $20,000
piece of equipment sucks the water out of the sea. It heats it to a
delightful temperature. It then pumps it down to the diver through a garden
hose, which is taped to the air hose.

Now this sounds like a darn good plan, and I've used it several times with
no complaints. What I do, when I get to the bottom and start working, is
take the hose and stuff it down the back of my wet suit.

This floods my whole suit with warm water. It's like working in a
Jacuzzi. Everything
was going well until all of a sudden, my butt started to itch. So, of
course, I scratched it.

This only made things worse. Within a few seconds my ass started to burn. I
pulled the hose out from my back, but the damage was done. In agony I
realized what had happened. The hot water machine had sucked up a jellyfish
and pumped it into my suit. Now, since I don't have any hair on my back, the
jellyfish couldn't stick to it, however, the crack of my ass was not as
fortunate.
When I scratched what I thought was an itch, I was actually grinding the
jellyfish into the crack of my ass.

I informed the dive supervisor of my dilemma over the communicator. His
instructions were unclear due to the fact that he, along with five other
divers, were all laughing hysterically. Needless to say, I aborted the
dive..

I was instructed to make three agonizing in-water decompression stops
totaling thirty-five minutes before I could reach the surface to begin my
chamber dry decompression. When I arrived at the surface, I was wearing
nothing but my brass helmet. As I climbed out of the water, the medic,
with tears of laughter running down his face, handed me a tube of cream and
told me to rub it on my butt as soon as I got in the chamber. The cream put
the fire out, but I couldn't **** for two days
because my ass was swollen shut.

So, next time you're having a bad day at work, think about how much worse it
would be if you had a jellyfish shoved up your ass. Now repeat to yourself,
'I love my job, I love my job, I love my job.'
Whenever you have a bad day, ask yourself, is this a jellyfish bad day?

May you NEVER have a jellyfish bad day! !!!!
Rofl

So true smile.gif and a good attempt to calm him down tongue.gif
...

This is a longshot, but if you switch the PCIe lanes off, that "VGA_LED" will come on.. try switching it off and on while the system is running, see if the led turns off.
and did you check the LN2 mode? dont remember reading about it.. LN2 off and try with and without the 4pin
another idea. Have you connected the 4 pin molex on the bottom of the board? it is unlikely it will help.. but since we have tried everything else, why not tongue.gif
and a question.. is PC speaker installed? any beeping?

 

I definitely have LN2 mode OFF lol. I only had the 8Pin EPS connected up until like 20 minutes before i left to feed my moms dog. After plugging the the 4Pin EPS in addition to the 8Pin, i still have the VGA LED and "b2" code...BUT the short beep on the speaker doesn't happen anymore (mobo speaker, not audio speaker)

 

I haven't bothered trying the bottom molex because i can't imagine that it could help with one GPU, but your right it's worth a shot.

 

And as far as the beeping, like i said when i have the GPU installed with the b2 and vga led, i've been getting one short beep. When i was testing the different dimms and trying other stuff, i've achieved every combination in the manual. But normally just one short beep. Since i added the 4Pin EPS, no more beep

 

Also, i'll try what you said with the lane switches

 

Quote:
Originally Posted by rRansom View Post

Anybody you know near your area that can maybe let you borrow their GPU? I'd say buy one locally and then just return it for a refund when done with the troubleshooting, but that's not how I roll.

It's just another one of those days when I wish I had the power/ability to teleport to wherever the hell I wish. If only I could drop by and swap my 7950 with your 290X, I'd do it without ever thinking twice.

 

Nobody i hang out with has ever been interested the slightest in computers except for me. Always been that way. 

I wish i had a MicroCenter close by. Maybe i'll swing by Best Buy tomorrow if it really comes to that.


Edited by kpoeticg - 1/30/14 at 6:49pm
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
post #1016 of 3109
If your 775 board has the right sluts then the GPU should work!!! in the mother board... maybe something to check...
post #1017 of 3109
Thread Starter 

Yeah, that's something i'm planning on checking too.

I just took the CPU out so i could check the socket. I might see a cpl bent pins but it's tough to tell. I need to check em out in Photoshop, brb

    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
post #1018 of 3109
How many times have you took the CPU in and out of the board???? doh.gif
post #1019 of 3109
Thread Starter 

Never up until this. I put it in and haven't touched it. I checked it earlier real fast and was real careful. Now this is my 2nd time because i wanted to see it in photoshop

 

 

 

 

It's still tough to tell. The pins i'm looking at are in the top left, a little more than halfway between the middle and the top

 

It's tough to get my camera in there and impossible with a tripod


Edited by kpoeticg - 1/30/14 at 7:40pm
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
post #1020 of 3109
Thread Starter 

Here's a few more

 

 

 

 

Anybody? Need better pics? I don't wanna keep messing with the socket, so i haven't put the CPU back in yet


Edited by kpoeticg - 1/30/14 at 8:06pm
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Mod Work Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › [Build Log] TRiCLOPS (HAF-XB, RIVE BE, LIQUID!!!!) (BACK-2-BLAHH)