Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › [Build Log] TRiCLOPS (HAF-XB, RIVE BE, LIQUID!!!!) (BACK-2-BLAHH)
New Posts  All Forums:Forum Nav:

[Build Log] TRiCLOPS (HAF-XB, RIVE BE, LIQUID!!!!) (BACK-2-BLAHH) - Page 128

Poll Results: Should i plan a built-in "extra" monitor ~9-13" modded into a transparent window or built in speakers?

 
  • 85% (83)
    Monitor
  • 14% (14)
    Speakers
97 Total Votes  
post #1271 of 3109
yeah I guess so 5ghz but at 1.5v I think I would step it back a little or are you going to use the speed step and it only run at this speed when it needs to???
post #1272 of 3109
Thread Starter 

I was just testing to see if i could get there. Definitely not gonna be my permanent clock. Maybe my gaming clock when i have my real loop setup depending on temps.

 

I was just trying to test my chip though. I'm pretty happy that it can get there, since i've heard that IB-E doesn't usually OC too well :D

 

I bought an Intel OC Warranty when i bought my cpu too. Gives me a little more courage when i'm raising things in BIOS :p

    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
post #1273 of 3109
GZ on the 5.0! seams like fairly good temps too..

Baah, my GPU was delayed -_- Normally when I order stuff, I have it the day after.. this time I ordered on Friday and I wont have it until Thursday.. thats 6 days (4 days not counting the weekend) compared to the normal 1 day shipping :S

COME ON!! weirdsmiley.gifsleepysmileyanim.gifmadsmiley.pngsleepysmiley03.gif
 
My Old Machine
(8 items)
 
 
CPUMotherboardGraphicsRAM
Haswell i5 4670K @ 4.6GHz MSI Z87-GD65 Gamer EVGA GTX780 SC ACX + XSPC Razor Corsair Dominator 2 x 8 GB 1866 MHz CL9 1.5V 
Hard DriveHard DriveCoolingOS
Samsung 830 Series 120 GB Samsung 840Pro Series 256 GB Custom Loop (See Build Log) Win7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung Syncmaster P2350 Logitech G710+ Corsair AX760 CoolerMaster HAF XB 
MouseMouse Pad
Logitech G5 Func 1030XL 
CPUMotherboardGraphicsRAM
Q6600 Core 2 Quad 65nm MSI P35 Platinum XFX GTX275 Core Edition OcZ Dual ch PC6400 4GB kit 
Hard DriveOSPower
1TB Sata 2 Windows 7, Ultimate - 64 bit TT Toughpower 750W 
  hide details  
Reply
 
My Old Machine
(8 items)
 
 
CPUMotherboardGraphicsRAM
Haswell i5 4670K @ 4.6GHz MSI Z87-GD65 Gamer EVGA GTX780 SC ACX + XSPC Razor Corsair Dominator 2 x 8 GB 1866 MHz CL9 1.5V 
Hard DriveHard DriveCoolingOS
Samsung 830 Series 120 GB Samsung 840Pro Series 256 GB Custom Loop (See Build Log) Win7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung Syncmaster P2350 Logitech G710+ Corsair AX760 CoolerMaster HAF XB 
MouseMouse Pad
Logitech G5 Func 1030XL 
CPUMotherboardGraphicsRAM
Q6600 Core 2 Quad 65nm MSI P35 Platinum XFX GTX275 Core Edition OcZ Dual ch PC6400 4GB kit 
Hard DriveOSPower
1TB Sata 2 Windows 7, Ultimate - 64 bit TT Toughpower 750W 
  hide details  
Reply
post #1274 of 3109
Thread Starter 

Thanx =)

 

Wish i didn't have to use 1.5V to get 5.0, but i'm happy that i can get it stable with good temps. Can't wait to test it when i have my rig/loop fully setup :D

 

That sux about your GPU, only one more day though :thumb:

 

Right now i'm compiling a cart on Digikey so i can get all the connectors and pins i need to finish my sleeving/cabling and mod the screen on my Aquaero to split it from the main PCB. Been kinda wrapped up lately in getting my BIOS setup and migrating data. Hopefully i can take care of my TAP Plastics order today too so the modding can resume!!! I need to grab a few aluminum L's & U's also to experiment with a few ideas i have. :wheee:

    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
post #1275 of 3109
so 4.8 @ 1.3v? smile.gif
Im jally! I cant get above 4.6 on my haswell or atleast 4.7 isnt 100% stable at 1.45v and dont dare to go any higher. so no chance I can even boot up on 5.0 just to get a validation frown.gif

got confirmation that the acrylic stuff from the states is shipped and in a package small enough for it to be shipped with plane without any extra fees smile.gif
My best guess is that it will be here Thursday-Friday next week. wheee.gif
 
My Old Machine
(8 items)
 
 
CPUMotherboardGraphicsRAM
Haswell i5 4670K @ 4.6GHz MSI Z87-GD65 Gamer EVGA GTX780 SC ACX + XSPC Razor Corsair Dominator 2 x 8 GB 1866 MHz CL9 1.5V 
Hard DriveHard DriveCoolingOS
Samsung 830 Series 120 GB Samsung 840Pro Series 256 GB Custom Loop (See Build Log) Win7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung Syncmaster P2350 Logitech G710+ Corsair AX760 CoolerMaster HAF XB 
MouseMouse Pad
Logitech G5 Func 1030XL 
CPUMotherboardGraphicsRAM
Q6600 Core 2 Quad 65nm MSI P35 Platinum XFX GTX275 Core Edition OcZ Dual ch PC6400 4GB kit 
Hard DriveOSPower
1TB Sata 2 Windows 7, Ultimate - 64 bit TT Toughpower 750W 
  hide details  
Reply
 
My Old Machine
(8 items)
 
 
CPUMotherboardGraphicsRAM
Haswell i5 4670K @ 4.6GHz MSI Z87-GD65 Gamer EVGA GTX780 SC ACX + XSPC Razor Corsair Dominator 2 x 8 GB 1866 MHz CL9 1.5V 
Hard DriveHard DriveCoolingOS
Samsung 830 Series 120 GB Samsung 840Pro Series 256 GB Custom Loop (See Build Log) Win7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung Syncmaster P2350 Logitech G710+ Corsair AX760 CoolerMaster HAF XB 
MouseMouse Pad
Logitech G5 Func 1030XL 
CPUMotherboardGraphicsRAM
Q6600 Core 2 Quad 65nm MSI P35 Platinum XFX GTX275 Core Edition OcZ Dual ch PC6400 4GB kit 
Hard DriveOSPower
1TB Sata 2 Windows 7, Ultimate - 64 bit TT Toughpower 750W 
  hide details  
Reply
post #1276 of 3109
Thread Starter 

I thought Haswell was supposed to be good for OC'ing. Maybe you should play with your BIOS more?

 

I doubt i could get 4.8 too stable at 1.3. I don't mind going 1.4 though with watercooling. Especially with my Intel OC Warranty

    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
post #1277 of 3109
Quote:
Originally Posted by kpoeticg View Post

I thought Haswell was supposed to be good for OC'ing. Maybe you should play with your BIOS more?

I doubt i could get 4.8 too stable at 1.3. I don't mind going 1.4 though with watercooling. Especially with my Intel OC Warranty

Haswell is subject to the silicon lottery. Both of my 4770ks do 4.7 at 1.325v and 1.95 vrin

You should be fine with 1.45 as long as your cooling allows it (it will tongue.gif )

I'm currently sitting at 1.425v with 4.9ghz.
post #1278 of 3109
4.6ghz at 1.3v is fairly common (if not a bit over average) but after that, Im having a hard time getting stable..
I THOUGHT I had 4.7 stable at 1.38v(if I remember correctly) but it still crashed when I was folding.. so went back to 4.6.. 4.8 wasnt remotely stable at 1.43 where I stopped.
Silicon lottery smile.gif some OC better than others.. Im happy with my 4.6, but might take up the OC challenge again.. but I doubt I will get above 4.8. and by then, I will be at too high voltage for me to feel confident about it. even though my temps was below 80.

HOWEVER! When I was OCing, I had one of the earliest BIOSes (1.3 I think) and im now running 1.8, so there might have been some changes that would help me get further with less vcore.. only time will tell smile.gif

I played around with Vcore, Multiplyer, Ring core, Ring Vcore, offsets and stuff like that, so doubt there was much more I could do to try and get it stable, other than raising the Vcore even further.
 
My Old Machine
(8 items)
 
 
CPUMotherboardGraphicsRAM
Haswell i5 4670K @ 4.6GHz MSI Z87-GD65 Gamer EVGA GTX780 SC ACX + XSPC Razor Corsair Dominator 2 x 8 GB 1866 MHz CL9 1.5V 
Hard DriveHard DriveCoolingOS
Samsung 830 Series 120 GB Samsung 840Pro Series 256 GB Custom Loop (See Build Log) Win7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung Syncmaster P2350 Logitech G710+ Corsair AX760 CoolerMaster HAF XB 
MouseMouse Pad
Logitech G5 Func 1030XL 
CPUMotherboardGraphicsRAM
Q6600 Core 2 Quad 65nm MSI P35 Platinum XFX GTX275 Core Edition OcZ Dual ch PC6400 4GB kit 
Hard DriveOSPower
1TB Sata 2 Windows 7, Ultimate - 64 bit TT Toughpower 750W 
  hide details  
Reply
 
My Old Machine
(8 items)
 
 
CPUMotherboardGraphicsRAM
Haswell i5 4670K @ 4.6GHz MSI Z87-GD65 Gamer EVGA GTX780 SC ACX + XSPC Razor Corsair Dominator 2 x 8 GB 1866 MHz CL9 1.5V 
Hard DriveHard DriveCoolingOS
Samsung 830 Series 120 GB Samsung 840Pro Series 256 GB Custom Loop (See Build Log) Win7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung Syncmaster P2350 Logitech G710+ Corsair AX760 CoolerMaster HAF XB 
MouseMouse Pad
Logitech G5 Func 1030XL 
CPUMotherboardGraphicsRAM
Q6600 Core 2 Quad 65nm MSI P35 Platinum XFX GTX275 Core Edition OcZ Dual ch PC6400 4GB kit 
Hard DriveOSPower
1TB Sata 2 Windows 7, Ultimate - 64 bit TT Toughpower 750W 
  hide details  
Reply
post #1279 of 3109
Quote:
Originally Posted by GaMbi2004 View Post

4.6ghz at 1.3v is fairly common (if not a bit over average) but after that, Im having a hard time getting stable..
I THOUGHT I had 4.7 stable at 1.38v(if I remember correctly) but it still crashed when I was folding.. so went back to 4.6.. 4.8 wasnt remotely stable at 1.43 where I stopped.
Silicon lottery smile.gif some OC better than others.. Im happy with my 4.6, but might take up the OC challenge again.. but I doubt I will get above 4.8. and by then, I will be at too high voltage for me to feel confident about it. even though my temps was below 80.

HOWEVER! When I was OCing, I had one of the earliest BIOSes (1.3 I think) and im now running 1.8, so there might have been some changes that would help me get further with less vcore.. only time will tell smile.gif

I played around with Vcore, Multiplyer, Ring core, Ring Vcore, offsets and stuff like that, so doubt there was much more I could do to try and get it stable, other than raising the Vcore even further.

On my ASUS VI Hero any bios after 804 required me to use at least .02 more than 804 does and adaptive spikes even more than normal. Downgraded to 804 and haven't look back. Well, except back at EVGA's Z87 line. tongue.gif After using this X79 Dark... Dang, what a bios.
post #1280 of 3109
Thread Starter 

All CPU's are subject to the silicon lottery :p

 

Closer your particular CPU was to the center of the silicon when the chips were pressed, the better clocker it will be.

 

Gambi, whey so scurred to break 1.4 when you're under water? I skipped Haswell, so don't really know the thermal difference, but 1.4 for gaming and such doesn't seem to be too much as long as your temps aren't crazy. That's one of the reasons to watercool

    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Mod Work Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › [Build Log] TRiCLOPS (HAF-XB, RIVE BE, LIQUID!!!!) (BACK-2-BLAHH)