Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › [Build Log] TRiCLOPS (HAF-XB, RIVE BE, LIQUID!!!!) (BACK-2-BLAHH)
New Posts  All Forums:Forum Nav:

[Build Log] TRiCLOPS (HAF-XB, RIVE BE, LIQUID!!!!) (BACK-2-BLAHH) - Page 193

Poll Results: Should i plan a built-in "extra" monitor ~9-13" modded into a transparent window or built in speakers?

 
  • 85% (83)
    Monitor
  • 14% (14)
    Speakers
97 Total Votes  
post #1921 of 3109
Thread Starter 

Wow, thanx for the positive feedback everybody =)

 

I actually had my measuring kit rulers all linked up ready to make those first snake bends, then thought better of it. I'm really not sure if the Mandrel's will make bends that tight, but i know i should practice my bending with something a bit simpler first lol. I may just leave it like that cuz i like the way it looks alot too. Especially once i get some coolant flowing.

 

I put the Kryographics Block by itself on the PCIE 1 slot just to see where the ports would be, and they were pretty much right above that ram slot, that's why i chose that route. Right now i'm gonna have those 2 free ports going to QDC's while i'm testing my GPU's on air.

 

Edit: James, i'm glad you like it. You and Darlene are the 2 people on here that opened my eyes to the benefit of making all horizontal and vertical lines. 

 

@MCCSolutions, glad to see you in here bro =)


Edited by kpoeticg - 4/6/14 at 12:18pm
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
post #1922 of 3109
Nice @kpoeticg thumb.gif
Looks crazy man!!.. cant wait to see that without the fittings.. gonna be a tall order! tongue.gif
Made any practice bends yet?

I dont remember the monsoon mandrel diameter, but I do know that I used those measures and sized it down a few mm for my home made mandrel, gives sharper bends and still not too sharp that it puts stress on the acrylic:



You can go even tighter than that, but I didnt need bends that tight.
Too bad you dont live in Europe.. I could have shipped one to you with the diameter of your choice smile.gif
(I know a guy who works on CNC machines all day long, so its easy for him to make this kind of items without anyone wanting payment for it.)
 
My Old Machine
(8 items)
 
 
CPUMotherboardGraphicsRAM
Haswell i5 4670K @ 4.6GHz MSI Z87-GD65 Gamer EVGA GTX780 SC ACX + XSPC Razor Corsair Dominator 2 x 8 GB 1866 MHz CL9 1.5V 
Hard DriveHard DriveCoolingOS
Samsung 830 Series 120 GB Samsung 840Pro Series 256 GB Custom Loop (See Build Log) Win7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung Syncmaster P2350 Logitech G710+ Corsair AX760 CoolerMaster HAF XB 
MouseMouse Pad
Logitech G5 Func 1030XL 
CPUMotherboardGraphicsRAM
Q6600 Core 2 Quad 65nm MSI P35 Platinum XFX GTX275 Core Edition OcZ Dual ch PC6400 4GB kit 
Hard DriveOSPower
1TB Sata 2 Windows 7, Ultimate - 64 bit TT Toughpower 750W 
  hide details  
Reply
 
My Old Machine
(8 items)
 
 
CPUMotherboardGraphicsRAM
Haswell i5 4670K @ 4.6GHz MSI Z87-GD65 Gamer EVGA GTX780 SC ACX + XSPC Razor Corsair Dominator 2 x 8 GB 1866 MHz CL9 1.5V 
Hard DriveHard DriveCoolingOS
Samsung 830 Series 120 GB Samsung 840Pro Series 256 GB Custom Loop (See Build Log) Win7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung Syncmaster P2350 Logitech G710+ Corsair AX760 CoolerMaster HAF XB 
MouseMouse Pad
Logitech G5 Func 1030XL 
CPUMotherboardGraphicsRAM
Q6600 Core 2 Quad 65nm MSI P35 Platinum XFX GTX275 Core Edition OcZ Dual ch PC6400 4GB kit 
Hard DriveOSPower
1TB Sata 2 Windows 7, Ultimate - 64 bit TT Toughpower 750W 
  hide details  
Reply
post #1923 of 3109
Thread Starter 

The 12mm Mandrel Kit is definitely tighter than the 16mm version. So i think there might be a possibility that it could make the bends, but i'm really not sure. I haven't made any test bends yet. I was up all night planning that out and linking it up.

 

I actually really like the way all the 90's look, so i might leave my mobo just like it is. Especially with all the positive feedback from everyone on it. I'll still have a ton of bends to do when i throw my rig back together and route my 4 rads, pumps, res, etc....

    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
post #1924 of 3109
Quote:
Originally Posted by wthenshaw View Post

I say forget trying to do all the bends and keep it like that!

I agree 100% I like the colors and the looks of the fittings along with the tubing.
post #1925 of 3109
Thread Starter 

Thanx brotha. That's why i asked for everybody's honest feedback. I like the look of the fittings too. I think i'm gonna have to take everybody's advice and leave my mobo linked up just like that.

 

I'll bend the tubing for the rest of my rig tho

    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
post #1926 of 3109
Thread Starter 

I ended up resoldering the pump that has a short last night. I cleaned off the solder pads, re-tinned them, and put fresh wire and solder. Also tried cleaning the pcb as much as possible with my desoldering braid (i really need to go buy a bottle of isopropyl)

 

The paint on my heatsinks was starting to chip because i didn't use the clearcoat i bought, so i tried to sand the chipped spots down and do a touch up paint job. All 3 heatsinks ended up bubbling up, and now i gotta re-sand all 3 of em down and re-prime and paint today. Didn't take pics of the heatsinks yet cuz sanding all the bubbles in the paint was the last thing i did b4 i went to sleep. 

 

Here's a cpl pics of the soldering tho

 

 

 

 

 

 

I'm still not the greatest when it comes to soldering. Still haven't gotten the whole using 6 hands thing down yet. I actually had a little trouble getting 4 decent solder joints with no solder bridges, so i'm probly not gonna resolder the rest of the pumps. I know the leak caused the short in this one

    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
post #1927 of 3109
It looks much better now! Better solder points and less exposed wire thumb.gif
I was shocked when you posted the original soldering.. looked terrible! and WAY too much exposed wire!
how come you are using heat shrink? cant you just cut the exposed wire to length? Yes, I know.. the original insulation might bubble up a bit if you use too much heat.. but that wouldnt be visible anyways, would it?
Have you tested it yet?

Thoughts about the mobo tubing:
First off, what I meant with "mandrel diameter" was the bending radius, not the tube diameter.. most acrylic tubes (any size) can be bend sharper than the typical mandrel kits allow.
So I had my own made with a tighter bend radius, allowing me to do sharper bends (witch you will probably need) smile.gif
I agree with many others that your mark up looks great! but that doesnt mean that plane C47 and bend tubes and less 90 degrees wouldn't look better, does it? smile.gif
Im not saying, get rid of ALL "extra" fettings.. the RAM bridge circled, is awesome tongue.gif you have to keep that! and maybe a few of the others will also be necessary


But at-least do a few of the bends to see how it looks (remember pics)

Just my 2cents.gifthumb.gif
 
My Old Machine
(8 items)
 
 
CPUMotherboardGraphicsRAM
Haswell i5 4670K @ 4.6GHz MSI Z87-GD65 Gamer EVGA GTX780 SC ACX + XSPC Razor Corsair Dominator 2 x 8 GB 1866 MHz CL9 1.5V 
Hard DriveHard DriveCoolingOS
Samsung 830 Series 120 GB Samsung 840Pro Series 256 GB Custom Loop (See Build Log) Win7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung Syncmaster P2350 Logitech G710+ Corsair AX760 CoolerMaster HAF XB 
MouseMouse Pad
Logitech G5 Func 1030XL 
CPUMotherboardGraphicsRAM
Q6600 Core 2 Quad 65nm MSI P35 Platinum XFX GTX275 Core Edition OcZ Dual ch PC6400 4GB kit 
Hard DriveOSPower
1TB Sata 2 Windows 7, Ultimate - 64 bit TT Toughpower 750W 
  hide details  
Reply
 
My Old Machine
(8 items)
 
 
CPUMotherboardGraphicsRAM
Haswell i5 4670K @ 4.6GHz MSI Z87-GD65 Gamer EVGA GTX780 SC ACX + XSPC Razor Corsair Dominator 2 x 8 GB 1866 MHz CL9 1.5V 
Hard DriveHard DriveCoolingOS
Samsung 830 Series 120 GB Samsung 840Pro Series 256 GB Custom Loop (See Build Log) Win7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung Syncmaster P2350 Logitech G710+ Corsair AX760 CoolerMaster HAF XB 
MouseMouse Pad
Logitech G5 Func 1030XL 
CPUMotherboardGraphicsRAM
Q6600 Core 2 Quad 65nm MSI P35 Platinum XFX GTX275 Core Edition OcZ Dual ch PC6400 4GB kit 
Hard DriveOSPower
1TB Sata 2 Windows 7, Ultimate - 64 bit TT Toughpower 750W 
  hide details  
Reply
post #1928 of 3109
You just reminded me I need to order parts for my stove top and a soldering iron. It sparks every time I use a burner... /lazy
post #1929 of 3109
Thread Starter 

Thanx. I still don't have a ton of confidence in my soldering yet. I used the heatshrink just as extra caution. Doesn't hurt anything. 

 

I haven't tested it yet because i completely botched the touch-up paintjob to my heatsinks and now i'm resanding all 3 of them down to the metal again and starting over. I should've used the clearcoat the first time around. Now i know better

 

I understood what you meant about the Radius'. When i spent all that money on those BP Angles & Rotaries, and then the Mandrel Kit came back in stock, i actually spent a bunch of time trying to picture how i could make it look good with a mix of bends and angles. And it just seems like it would look best with all bends or all angles. I feel like it gives it more symmetry or consistency. 

 

That's an extremely tight space to have all those runs. I'm actually shocked that i was able to pull it off so clean. Even really tight bends i don't think would look as clean and squared off as the way i have it now. I really wanna keep all horizontal and vertical lines with as much symmetry as possible. 

 

I'm definitely gonna be using ALL bends for everything else in my rig. 

 

I still have a bunch more 12mm tubing, and i'm probly gonna use 16mm for the rest of my rig, so chances are i'll be messing around with some bends to see what it looks like. I don't know if i'll be able to make it better than the angles tho

 

The problem that i'm expecting with bending, isn't any single radius. Like look at my CPU => PCH for instance. That's 3 tight bends with only a few mm of tubing in between. Or my VRM => Ram (on the vrm side), i don't think that'll be possible for me with bending. And i don't think it'll look good with some bends and some F/F 90's

    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
post #1930 of 3109
I agree! CPU->PCB is gonna be a PITA! but not impossible smile.gif
What ever you end up using, it is gonna look awesome! thumb.gif
 
My Old Machine
(8 items)
 
 
CPUMotherboardGraphicsRAM
Haswell i5 4670K @ 4.6GHz MSI Z87-GD65 Gamer EVGA GTX780 SC ACX + XSPC Razor Corsair Dominator 2 x 8 GB 1866 MHz CL9 1.5V 
Hard DriveHard DriveCoolingOS
Samsung 830 Series 120 GB Samsung 840Pro Series 256 GB Custom Loop (See Build Log) Win7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung Syncmaster P2350 Logitech G710+ Corsair AX760 CoolerMaster HAF XB 
MouseMouse Pad
Logitech G5 Func 1030XL 
CPUMotherboardGraphicsRAM
Q6600 Core 2 Quad 65nm MSI P35 Platinum XFX GTX275 Core Edition OcZ Dual ch PC6400 4GB kit 
Hard DriveOSPower
1TB Sata 2 Windows 7, Ultimate - 64 bit TT Toughpower 750W 
  hide details  
Reply
 
My Old Machine
(8 items)
 
 
CPUMotherboardGraphicsRAM
Haswell i5 4670K @ 4.6GHz MSI Z87-GD65 Gamer EVGA GTX780 SC ACX + XSPC Razor Corsair Dominator 2 x 8 GB 1866 MHz CL9 1.5V 
Hard DriveHard DriveCoolingOS
Samsung 830 Series 120 GB Samsung 840Pro Series 256 GB Custom Loop (See Build Log) Win7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung Syncmaster P2350 Logitech G710+ Corsair AX760 CoolerMaster HAF XB 
MouseMouse Pad
Logitech G5 Func 1030XL 
CPUMotherboardGraphicsRAM
Q6600 Core 2 Quad 65nm MSI P35 Platinum XFX GTX275 Core Edition OcZ Dual ch PC6400 4GB kit 
Hard DriveOSPower
1TB Sata 2 Windows 7, Ultimate - 64 bit TT Toughpower 750W 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Mod Work Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › [Build Log] TRiCLOPS (HAF-XB, RIVE BE, LIQUID!!!!) (BACK-2-BLAHH)