God morning brotha'
Lol, i don't know what to tell you about the fillport. It's not like i wanted the liquid to be sitting there. I had to disconnect the fillport with the pump off and the chassis laying completely on its side to get the liquid to stay in the res.
Ooooooh.. NOW I get it
the filler tube is fully connected to ress and therefore has suction from the pump, making the water travel to the ress end of the tube.. Doh me -_-
And yea, had kinda figgured you had the RAM in the right slots and had tried with only one stick of ram for testing
b2 is related to RAM problems :S but isnt necessarily a RAM problem..
Try once more, one stick in D1, clear CMOS and try to boot..
also, your board has dual bios, yes? try booting from the 2nd one
Your GPU is fairly new, so you might need a BIOS update to make it work with this tech.Asus BIOS flash guide
Just throwing ideas around here.. hope you get it working body!
Can we have a pic of the mobo without the paper towels? guessing leak testing is about done
and that VGA_LED care to explain what that is? pics? Edited by GaMbi2004 - 1/30/14 at 2:15pm