Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] HAF Stacker Owners Club
New Posts  All Forums:Forum Nav:

[Official] HAF Stacker Owners Club - Page 8

post #71 of 746
They fit with no problem as you can see by the picture. My whole idea switching to this case was to add 2 more radiators to what was already using, Haf932 with a custom acetal base. I worked very well so this was the next step, more silent cooling more efficient cooling. As far as temps the warmest water temp I have seen so far gaming Crysis 3 for one hour has been 26c or about 78 degrees with all fans running at 1000rpm. Hope this helps.


post #72 of 746
Quote:
Originally Posted by lostboy5977 View Post

They fit with no problem as you can see by the picture. My whole idea switching to this case was to add 2 more radiators to what was already using, Haf932 with a custom acetal base. I worked very well so this was the next step, more silent cooling more efficient cooling. As far as temps the warmest water temp I have seen so far gaming Crysis 3 for one hour has been 26c or about 78 degrees with all fans running at 1000rpm. Hope this helps.



What fittings did you use on the rads? straight, 45, 90 degrees. I plan on stacking it on top, just one rad now till I get more cash.

With the 360mm rads in the 915, are you able to put a fan controller, res, or DVD ROM in the empty bay? I would like to get something in there.
Movin' on Up
(23 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8320 ASUS SABERTOOTH 990FX R2.0 MSI R7950-3GD5/OC BE Samsung 8GB DDR3-1600 (PC3-12800) 
Hard DriveOptical DriveCoolingCooling
SAMSUNG SSD 840 Liteon IHAS 524 DVD writer  XSPC Raystorm CPU Waterblock (2) EK-PSC Adapter 90° G1/4 Black Nickel 
CoolingCoolingCoolingCooling
EK Radeon HD 7950 VGA Liquid Cooling Block Alphacool NexXxoS XT45 Full Copper 360mm Radiator Swiftech MCP655 XSPC Single Bay Reservoir 5.25" 
CoolingCoolingCoolingCooling
(6) Swiftech Helix 120MM 9-Blade Z-Bearing Fan ... (10) XSPC G1/4" to 1/2" ID, 3/4" OD Compression... PrimoFlex Advanced LRT Tubing - 1/2in. ID X 3/4... (2) EK-PSC Adapter 45° G1/4 Nickel 
OSMonitorKeyboardPower
Windows 7 64bit Samsung SyncMaster P2370HD  Logitech K300 Rosewill Tachyon-650 
CaseMouseMouse Pad
CoolerMaster HAF Stacker 935 Logitech Allsop 
  hide details  
Reply
Movin' on Up
(23 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8320 ASUS SABERTOOTH 990FX R2.0 MSI R7950-3GD5/OC BE Samsung 8GB DDR3-1600 (PC3-12800) 
Hard DriveOptical DriveCoolingCooling
SAMSUNG SSD 840 Liteon IHAS 524 DVD writer  XSPC Raystorm CPU Waterblock (2) EK-PSC Adapter 90° G1/4 Black Nickel 
CoolingCoolingCoolingCooling
EK Radeon HD 7950 VGA Liquid Cooling Block Alphacool NexXxoS XT45 Full Copper 360mm Radiator Swiftech MCP655 XSPC Single Bay Reservoir 5.25" 
CoolingCoolingCoolingCooling
(6) Swiftech Helix 120MM 9-Blade Z-Bearing Fan ... (10) XSPC G1/4" to 1/2" ID, 3/4" OD Compression... PrimoFlex Advanced LRT Tubing - 1/2in. ID X 3/4... (2) EK-PSC Adapter 45° G1/4 Nickel 
OSMonitorKeyboardPower
Windows 7 64bit Samsung SyncMaster P2370HD  Logitech K300 Rosewill Tachyon-650 
CaseMouseMouse Pad
CoolerMaster HAF Stacker 935 Logitech Allsop 
  hide details  
Reply
post #73 of 746
From rad to rad I used straight compression to each other, Alphacool 90 degree to bring hoses up and down. The fan controllers and dvd went in the front of the main case and the hard drives went on top of the upper case. SSD went on back of the mobo.
post #74 of 746
OK - just waiting for my CC pay date to trip over to pull the trigger on stacker.

I have a bonkers idea to fit a 420 rad in the 915.

It looks like I need to drill the fixing holes in the side panel (x12), then make a shroud to fit between the rad and the side panel.

Do-able?
Edited by Wihglah - 1/7/14 at 11:23am
post #75 of 746

Thought this might be a good spot for this seeing as there are going to be some good things for all the HAF Stacker owners out there coming soon.

 

 

 

Enjoy! :thumb:

Nightmare
(12 items)
 
Wifey Rig
(14 items)
 
 
CPUMotherboardGraphicsRAM
Intel i5 3570K Maximus V Formula Z77 AMD Radeon 6990 G.SKILL Ripjaw X 8gigs 
Hard DriveOptical DriveCoolingOS
WD Black 640gig ASUS DRW-24B1ST XSPC Raystorm CPU Block, 2 EX 240 Rads, Koolanc... Win 7 Home Premium 
MonitorKeyboardPowerCase
IPS231P-BN x5 Razer Black Widow Ultimate BF3 Edition Seasonic X 1250 Watt NZXT Phantom Red 
CPUMotherboardGraphicsRAM
AMD Phenom II x4 3.4 Gigabyte 990 FXA-UD3 Sapphire Vapor-X 5750 G.SKILL Ripjaws X Series 8gig DDR3 1333MHz 
Hard DriveOptical DriveCoolingOS
WD Carviar Black 640gig ASUS DRW-24B1ST CoolerMaster Hyper 212 Evo Windows 7 Home Premium 64 bit 
MonitorPowerCase
Gateway 22" 1680x1050 Coolermaster 660 Watt Antec DF-30 
CPUGraphicsRAMHard Drive
AMD A6-3670k Club 3D 7950 Royal King Kingston HyperX Genesis Seagate Barracuda 
Optical DriveOSPowerCase
LG Internal 24x DVD-Writer, OEM Windows 7 Ultimate Antec HCG-520M Silverstone SG01-s 
  hide details  
Reply
Nightmare
(12 items)
 
Wifey Rig
(14 items)
 
 
CPUMotherboardGraphicsRAM
Intel i5 3570K Maximus V Formula Z77 AMD Radeon 6990 G.SKILL Ripjaw X 8gigs 
Hard DriveOptical DriveCoolingOS
WD Black 640gig ASUS DRW-24B1ST XSPC Raystorm CPU Block, 2 EX 240 Rads, Koolanc... Win 7 Home Premium 
MonitorKeyboardPowerCase
IPS231P-BN x5 Razer Black Widow Ultimate BF3 Edition Seasonic X 1250 Watt NZXT Phantom Red 
CPUMotherboardGraphicsRAM
AMD Phenom II x4 3.4 Gigabyte 990 FXA-UD3 Sapphire Vapor-X 5750 G.SKILL Ripjaws X Series 8gig DDR3 1333MHz 
Hard DriveOptical DriveCoolingOS
WD Carviar Black 640gig ASUS DRW-24B1ST CoolerMaster Hyper 212 Evo Windows 7 Home Premium 64 bit 
MonitorPowerCase
Gateway 22" 1680x1050 Coolermaster 660 Watt Antec DF-30 
CPUGraphicsRAMHard Drive
AMD A6-3670k Club 3D 7950 Royal King Kingston HyperX Genesis Seagate Barracuda 
Optical DriveOSPowerCase
LG Internal 24x DVD-Writer, OEM Windows 7 Ultimate Antec HCG-520M Silverstone SG01-s 
  hide details  
Reply
post #76 of 746
Hey guys first time poster here. Got my Haf Stacker case not too long ago. Unfortunately i didn't get to take any pictures before i started working on it but here are some i was able to take with my phone.

Top case with power supply. I will be using the 915 as a Rad box on the bottom.

Shot of the case mod i made so the psu could fit properly.

Close up of said mod.

My Alphacool NexXxoS UT60 radiator with 6 Gentle Typhoon AP-15s in Push/Pull. Shortened the fan leads to clean things up. Making the 6 to 1 harness currently. The blue connector you see is so it matches the harness. On the Harness the blue with be the one my tach is read from.


post #77 of 746
Looks like a good start:thumb:
post #78 of 746
Guys, i want to use a HAF stacker 915 as a external WC box.. except looking at the dimensions i worked out i'd get 2 thick 360mm rads on each side with 1 lot of 3 fans on both. Just enough space for a D5 pump in the middle of the rads, but just a bit short of being able to have a CD drive style reservoir.. I think the only way a reservoir would fit is in the space near the front, but it would be a compact one and not really viewable like in a window style that i would like. The ideal thing is the hole at the back where a motherboard would go, making routing the tubing out the back very easy.

Is that the only way to fit everything in? Too bad there isn't a slim drive bay res, i think there'd only be about a 4-5" gap from the front of the case to where a rad would get in the way?

Other way would surely fit everything is having 2x 240mm rads, but that cuts on rad space which i don't want to do.
post #79 of 746
Hey there everyone, While researching for my upgrade I came across this case and just about had a nerdgasm. One problem that I am currently having with my current Antec 1200 is the dust management. Other than finding it stated "Filtered Intakes" on its product page I cannot find anything more substantial on the matter. So here are the actual questions. How many filters are there, how easy are they to get in and out to clean? Any other pertinent thoughts would be very welcome as well!

Also, the 92mm front fan in the 915, is there room for a 92mm to 120mm converter, or would the drive cage kill that idea?

Thanks
--Griz--
Monolith v3
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core 2 Quad Q6600 @ 3Ghz Gigabyte EP45-UD3P EVGA GTX 560ti 448 4GB GSkill DDR2 800 @ 1000 
Hard DriveOptical DriveOSMonitor
1 x 73GB WD Raptor, 3x WD 640, 2 x WD 250GB LG DVD Burner Linux Mint 16 x86_64 NEC MultiSync EA231WMi 23" IPS, Gateway FPD2185... 
KeyboardPowerCaseAudio
Dell AT101W Corsair 850TX Antec 1200 ESI Juli@ 24/192Khz PCI Sound Card 
  hide details  
Reply
Monolith v3
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core 2 Quad Q6600 @ 3Ghz Gigabyte EP45-UD3P EVGA GTX 560ti 448 4GB GSkill DDR2 800 @ 1000 
Hard DriveOptical DriveOSMonitor
1 x 73GB WD Raptor, 3x WD 640, 2 x WD 250GB LG DVD Burner Linux Mint 16 x86_64 NEC MultiSync EA231WMi 23" IPS, Gateway FPD2185... 
KeyboardPowerCaseAudio
Dell AT101W Corsair 850TX Antec 1200 ESI Juli@ 24/192Khz PCI Sound Card 
  hide details  
Reply
post #80 of 746
Quote:
Originally Posted by lostboy5977 View Post

They fit with no problem as you can see by the picture. My whole idea switching to this case was to add 2 more radiators to what was already using, Haf932 with a custom acetal base. I worked very well so this was the next step, more silent cooling more efficient cooling. As far as temps the warmest water temp I have seen so far gaming Crysis 3 for one hour has been 26c or about 78 degrees with all fans running at 1000rpm. Hope this helps.

Warning: Spoiler! (Click to show)

Hmmmm, I been wondering how the older Hafs would work on the 915 Stackers. How similar would a Haf X look on a 915? Really debating on getting one to use as a pedestal for my Haf X during its rebuild.
     
CPUMotherboardGraphicsGraphics
5960X Gigabyte X99-UD3P GTX 1080Ti SC GTX 1070 SC 
GraphicsRAMHard DriveHard Drive
GTX 1070 SC GSkill TridentZ 32GB 3200MHz Samsung 840 Pro 256GB Crucial m4 512GB 
Hard DriveCoolingCoolingCooling
Seagate Barracuda 3TB EK EVO 2x EK Full Nickel/Acetal Titan X Block Monsoon Premium Bay Res v.2/ Vero D5 pump insta... 
CoolingCoolingOSMonitor
HWLab Black Ice 360/ 3x eLoops in Push/Pull Phobya 200/ Cooler Master Mega Flow Fan in Push Windows 7 Ultimate 64-bit Overlord 1440P 
KeyboardPowerCaseMouse
Corsair K70 Vengeance Corsair AX1200W Cooler Master Haf X Modded Logitech G500s 
CPUMotherboardGraphicsGraphics
1090T ASUS Sabertooth 990FX GTX960 FTW @ 1552MHz / Stock volts GTX980 STRIX 
RAMHard DriveCoolingCooling
Corsair Vegeance 8GB Intel SSD Corsair H60 Corsair H55/Kraken G10 on GTX960 
OSPowerCase
Ubuntu 15.04 Thermaltake Black Widow 850W NZXT Apollo (Soon to change) 
CPUOSCase
Intel Core i3 Ubuntu 14.04LTS Toshiba Satellite Ultrabook 
  hide details  
Reply
     
CPUMotherboardGraphicsGraphics
5960X Gigabyte X99-UD3P GTX 1080Ti SC GTX 1070 SC 
GraphicsRAMHard DriveHard Drive
GTX 1070 SC GSkill TridentZ 32GB 3200MHz Samsung 840 Pro 256GB Crucial m4 512GB 
Hard DriveCoolingCoolingCooling
Seagate Barracuda 3TB EK EVO 2x EK Full Nickel/Acetal Titan X Block Monsoon Premium Bay Res v.2/ Vero D5 pump insta... 
CoolingCoolingOSMonitor
HWLab Black Ice 360/ 3x eLoops in Push/Pull Phobya 200/ Cooler Master Mega Flow Fan in Push Windows 7 Ultimate 64-bit Overlord 1440P 
KeyboardPowerCaseMouse
Corsair K70 Vengeance Corsair AX1200W Cooler Master Haf X Modded Logitech G500s 
CPUMotherboardGraphicsGraphics
1090T ASUS Sabertooth 990FX GTX960 FTW @ 1552MHz / Stock volts GTX980 STRIX 
RAMHard DriveCoolingCooling
Corsair Vegeance 8GB Intel SSD Corsair H60 Corsair H55/Kraken G10 on GTX960 
OSPowerCase
Ubuntu 15.04 Thermaltake Black Widow 850W NZXT Apollo (Soon to change) 
CPUOSCase
Intel Core i3 Ubuntu 14.04LTS Toshiba Satellite Ultrabook 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] HAF Stacker Owners Club